• 한국추진공학회지
• /
• 제14권4호
• /
• pp.39-45
• /
• 2010

자주포 또는 원자로와 같은 두꺼운 실린더는 압력용기 내부에 유익한 잔류 압축응력을 유도하여 작용압력과 피로수명을 증가시키도록 자긴 가공되고 있다. 자긴가공도가 증가하면 구멍에서 압축잔류응력의 크기도 증가한다. 본연구의 목적은 ASME 코드에 의해 적용된 Kendall 모델을 이용하여 고강도 SCM440 강의 정확한 잔류응력을 예측하는 것이다. SCM440 후육실린더의 내부에 유압이 적용되고 30% 변형률까지 자긴 가공하였다. 자긴가공된 시편은 전해연마하고 X-ray 회절법을 이용하여 정확한 잔류응력을 산출하도록 하였다. 그리고 주사전자현미경을 이용하여 자긴가공에 의해 소성변형된 표면층을 분석하였다. 측정한 잔류응력과 계산된 결과를 비교하여 약간의 차이는 있으나 비교적 서로 잘 일치하고 있다.

• Nuclear Engineering and Technology
• /
• 제54권7호
• /
• pp.2592-2598
• /
• 2022

Research groups in the field of PET instrumentation are studying time-of-flight(TOF) technology to improve the signal-to-noise ratio of PET images. Scintillation light transport and collection plays an important role in improving the coincidence resolving time(CRT) of PET detector based on a pixelated crystal array. Four crystal arrays were designed by the different optical reflection configuration such as external reflectors and surface treatment on the CRT and compared with the light output, energy resolution and CRT. The design proposed in the study was composed of 8 × 8 LYSO crystal array consisted of 3 × 3 × 15 mm³ pixels. The entrance side was roughened while the other five surfaces were polished. Four sides of all crystal pixels were wrapped with ESR-film, and the entrance surface was covered by Teflon-tape. The design provided an excellent timing resolution of 210 ps and improved the CRT by 16% compared to the conventional method using a polishing treatment and ESR-film. This study provided a method for improving the light output and CRT of a pixelated scintillation crystal-based brain TOF PET detector. The proposed configuration might be an attractive detector design for TOF brain PET requiring fast timing performance with high cost-effectiveness.

• 반도체디스플레이기술학회지
• /
• 제22권2호
• /
• pp.30-34
• /
• 2023

Since dishing in the CMP process is a major factor that hinders the uniformity of the semiconductor thin film, many studies have focused this issue to improve the non-uniformity of the film due to dishing. In the metal layer, the dishing mainly occurs in the central part of the metal due to a difference in a selection ratio between the metal and the dielectric, thereby generating a step on the surface of the metal layer. Factors that cause dishing include the shape of the thin film, the chemical reaction of the slurry, thermal deformation, and the rotational speed of the pad and head, and dishing occurs due to complex interactions between them. This study analyzed the stress generated on the metal layer surface in the CMP process using ANSYS software, a commercial structure analysis program. The stress caused by the vertical load applied from the pad was analyzed by changing the area density and line width of the dummy metal. As a result of the analysis, the stress in the active region decreased as the pattern density and line width of the dummy metal increased, and it was verified that it was valid compared with the previous study that studied the dishing according to the dummy pattern density and line width of the metal layer. In conclusion, it was confirmed that there is a relationship between dishing and normal stress.

• 한국건축시공학회지
• /
• 제24권1호
• /
• pp.77-86
• /
• 2024

본 연구에서는 폴리우레아 도막방수재의 시공 시차별 분석과 열화면에 대한 유지관리 시공 타입별 분석을 통해 시공 이음부위의 적정 시공 방안을 제시하고자 전체 16가지 조건을 대상으로 시공 이음부위에 대한 평가를 진행하였다. 결과 분석을 통해 시공시차가 길어지면 길어질수록 이음부를 통한 누수발생률은 증가하는 것으로 분석되었고, 프라이머 시공을 통해 누수 예방이 가능한 것으로 확인되었다. 또한 장시간 옥외 노출된 폴리우레아는 표면이 열화되어 약해진 상태이기 때문에 해당 부위를 연마할 경우 표면손상이 확대되어 계면 형성에 영향을 미치는 것으로 분석되어, 유지관리 시공 시에는 프라이머를 도포하고 시공하는 것이 바람직하겠으며, 동일한 우레아 계열의 재료를 시공하는 것이 방수 안정성을 확보할 수 있을 것으로 판단된다.

• Journal of Periodontal and Implant Science
• /
• 제46권6호
• /
• pp.362-371
• /
• 2016

Purpose: The increasing demand for esthetically pleasing results has contributed to the use of ceramics for dental implant abutments. The aim of this study was to compare the biological response of epithelial tissue cultivated on lithium disilicate ($LS_2$) and zirconium oxide ($ZrO_2$) ceramics. Understanding the relevant physicochemical and mechanical properties of these ceramics will help identify the optimal material for facilitating gingival wound closure. Methods: Both biomaterials were prepared with 2 different surface treatments: raw and polished. Their physicochemical characteristics were analyzed by contact angle measurements, scanning white-light interferometry, and scanning electron microscopy. An organotypic culture was then performed using a chicken epithelium model to simulate peri-implant soft tissue. We measured the contact angle, hydrophobicity, and roughness of the materials as well as the tissue behavior at their surfaces (cell migration and cell adhesion). Results: The best cell migration was observed on $ZrO_2$ ceramic. Cell adhesion was also drastically lower on the polished $ZrO_2$ ceramic than on both the raw and polished $LS_2$. Evaluating various surface topographies of $LS_2$ showed that increasing surface roughness improved cell adhesion, leading to an increase of up to 13%. Conclusions: Our results demonstrate that a biomaterial, here $LS_2$, can be modified using simple surface changes in order to finely modulate soft tissue adhesion. Strong adhesion at the abutment associated with weak migration assists in gingival wound healing. On the same material, polishing can reduce cell adhesion without drastically modifying cell migration. A comparison of $LS_2$ and $ZrO_2$ ceramic showed that $LS_2$ was more conducive to creating varying tissue reactions. Our results can help dental surgeons to choose, especially for esthetic implant abutments, the most appropriate biomaterial as well as the most appropriate surface treatment to use in accordance with specific clinical dental applications.

• Journal of Astronomy and Space Sciences
• /
• 제18권3호
• /
• pp.239-248
• /
• 2001

2002년에 발사 예정인 과학 위성 1호의 주 탑재체로 원자외선 분광기가 실릴 예정이다. 원자외선 분광기는 영상과 분광의 기능을 함께 수행하게 되는데, 광학 부품 중 포물 원통 만가경의 경우 천문 관측용으로는 제작된 바가 없어 제작과 이에 관련된 측정 방법을 새로이 고안하여 제작시험이 이루어 겼다. 관측 목표로부터 도출된 사양 중에서 성능과 가장 밀접한 관계가 있는 형상오차의 경우 ~ $lambda/cm$의 한계를 만족하였으며, 산란장과 연관된 표면 거칠기의 경우 새로이 고안된 비구면 pitch polishing의 방법으로 $R_{q}$의 값이 1 nm 이하로 감소하였으며, 이로써 전체 파장 영역에서 0.02, 즉 2% 미만의 빛이 산란됨을 간접적으로 확인하였다.

• Restorative Dentistry and Endodontics
• /
• 제22권1호
• /
• pp.358-373
• /
• 1997

Resin modified glass ionomers were introduced in 1988 to overcome the problems of moisture sensitivity and low early mechanical strength of conventional glass ionomers and to maintain their clinical advantages. The purpose of this study was to evaluate the color stability of four resin modified glass ionomers(Fuji II LC, Vitremer, Dyract and VariGlass), one resin composite material(Z-100), and one conventional glass ionomer(GC Fuji II) under several conditions. These conditions were as follows: 1) before curing, 2) after curing, 3) after polishing, 4) after 500 thermocycling, 5) after 1,000 thermocycling, 6) after 1,500 thermocycling and 7) after 2,000 thermocycling. Three specimens of each material/shade combination were made. Materials were condensed into metal mold with a diameter of 10 mm and a thickness of 2.0 mm, and were pressed between glass plates. The material was polymerized using a light polymerizing unit(Visilux II, 3M, USA). After removal of excess, the surface was polished sequentially on wet sandpapers. A reflection spectrophotometer(Model TC-6FX, Tokyo Denshoku Co., Japan) was used to determine CIELAB coordinates($L^*,a^*$ and $b^*$) of each specimen. CIE standard illumination C was used as the light source. The results were as follows : 1. In comparing different shades of same material, CIELAB color difference(${\Delta}E^*$) value was not significantly different from each other(p>0.05). 2. CIELAB color difference(${\Delta}E^*$) values between after-curing and after-polishing were ranged from 5.53 to 27.08. These values were higher than those of other condition combinations. 3. CIELAB color difference(${\Delta}E^*$) values between before-thermocycling and after-thermocycling were ranged from 1.40 to 7.81. Despite the number of thermocycling increased, CIELAB color difference(${\Delta}E^*$) value was low. 4. The color stability of resin modified glass ionomers was more stable than that of conventional glass ionomers but less stable than that of Z100.

• 자원리싸이클링
• /
• 제4권1호
• /
• pp.12-19
• /
• 1995

화강암 석재가공 공장의 절단 및 연마공정시 발생하는 슬러지를 재활용하기 위해 광물학적 조사 및 화학분석을 실시하였으며, 철분 및 불순물등의 제거 실험을 위한 습식 하드로싸이클론 및 고구배자력선별 실험을 실시하였다. $SiO_2$와 $Al_2O_3$의 함량은 각각 70.9%, 13.6%이었으며, 요업 및 사업원료로 사용하는데 있어서 백색도를 저하시키는 불순물인 $Fe_2O_3$함량은 2.52%로 비교적 많았으며, $TiO_2$함량은 0.29%이였다. 하이드로싸이클론 실험결과 슬러지의 양은 100~150g/l, Underflow Nozzle의 크기는 2.0~2.5mm, 압력은 1.2~1.6kg/$\textrm{cm}^3$의 조건에서 $-37{\mu}\textrm{m}$ 입도 85%를 얻을 수 있었다. 고구배자력실험결과 10,000가우스에서 $Fe_2O_3$는 0.65%, $TiO_2$는 0.07%인 비자착산물을 얻을 수 있었으며, 분산제로 Sodium tripolyphosphate를 사용한 결과 탈철에 효과적이였다. 슬러지 산물의 물리적인 특성은 백색도 68.5%, 수축율 13.4%, 비표면적 $3.0812m^2/g$로 나타났다.

• Restorative Dentistry and Endodontics
• /
• 제27권2호
• /
• pp.150-157
• /
• 2002

One of the latest concepts in bonding are "total etch", in which both enamel and dentin are etched with an acid to remove the smear layers, and "wet dentin" in which the dentin is not dry but left moist before application of the bonding primer Ideally the application of a bonding agent to tooth structure should be insensitive to minor contamination from oral fluids. Clinically, contaminations such as saliva, gingival fluid, blood and handpiece lubricant are often encountered by dentists during cavity preparation. The aim of this study was to evaluate the effect of contamination by hemostatic agents on shear bond strength of compomer restorations. One hundred and ten extracted human maxillary and mandibular molar teeth were collected. The teeth were removed soft tissue remnant and debris and stored in physiologic solution until they were used. Small flat area on dentin of the buccal surface were wet ground serially with 400, 800 and 1200 abrasive papers on automatic polishing machine. The teeth were randomly divided into 11 groups. Each group was conditioned as follows : Group 1: Dentin surface was not etched and not contaminated by hemostatic agents. Group 2: Dentin surface was not etched but was contaminated by Astringedent$^{\circledR}$(Ultradent product Inc., Utah, U.S.A.) Group 3: Dentin surface was not etched but was contaminated by Bosmin$^{\circledR}$(Jeil Pharm, Korea.). Group 4: Dentin surface was not etched but was contaminated by Epri-dent$^{\circledR}$(Epr Industries, NJ, U.S.A.). Group 5: Dentin surface was etched and not contaminated by hemostatic agents. Group 6: Dentin sorface was etched and contaminated by Astringedent$^{\circledR}$. Group 7 : Dentin surface was etched and contaminated by Bosmin$^{\circledR}$. Group 8: Dentin surface was etched and contaminated by Epri-dent$^{\circledR}$. Group 9: Dentin surface was contaminated by Astringedent$^{\circledR}$. The contaminated surface was rinsed by water and dried by compressed air. Group 10: Dentin surface was contaminated by Bosmin$^{\circledR}$. The contaminated surface was rinsed by water and dried by compressed air. Group 11 : Dentin surface was contaminated by Epri-dent$^{\circledR}$. The contaminated surface was rinsed by water and dried by compressed air. After surface conditioning, F2000$^{\circledR}$ was applicated on the conditoned dentin surface The teeth were thermocycled in distilled water at 5$^{\circ}C$ and 55$^{\circ}C$ for 1,000 cycles. The samples were placed on the binder with the bonded compomer-dentin interface parallel to the knife-edge shearing rod of the Universal Testing Machine(Zwick Z020, Zwick Co., Germany) running at a cross head speed or 1.0 mm/min. Group 2 showed significant decrease in shear bond strength compared with group 1 and group 6 showed significant decrease in shear bond strength compared with group 5. There were no significant differences in shear bond strength between group 5 and group 9, 10 and 11.

• Journal of Astronomy and Space Sciences
• /
• 제27권2호
• /
• pp.153-160
• /
• 2010

We modified the optical system of 500 mm wide-field telescope of which point spread function showed an irregularity. The telescope has been operated for Near Earth Space Survey (NESS) located at Siding Spring Observatory (SSO) in Australia, and the optical system was brought back to Korea in January 2008. After performing a numerical simulation with the tested value of surface figure error of the primary mirror using optical design program, we found that the surface figure error of the mirror should be fabricated less than root mean square (RMS) $\lambda$/10 in order to obtain a stellar full width at half maximum (FWHM) below $28\;{\mu}m$. However, we started to figure the mirror for the target value of RMS $\lambda$/20, because system surface figure error would be increased by the error induced by the optical axis adjustment, mirror cell installation, and others. The radius of curvature of the primary mirror was 1,946 mm after the correction. Its measured surface figure error was less than RMS $\lambda$/20 on the table of polishing machine, and RMS $\lambda$/15 after installation in the primary mirror cell. A test observation performed at Daeduk Observatory at Korea Astronomy and Space Science Institute by utilizing the exiting mount, and resulted in $39.8\;{\mu}m$ of stellar FWHM. It was larger than the value from numerical simulation, and showed wing-shaped stellar image. It turned out that the measured-curvature of the secondary mirror, 1,820 mm, was not the same as the designed one, 1,795.977 mm. We fabricated the secondary mirror to the designed value, and finally obtained a stellar FWHM of $27\;{\mu}m$ after re-installation of the optical system into SSO NESS Observatory in Australia.