• 대한기계학회논문집
• /
• 제17권2호
• /
• pp.452-457
• /
• 1993

For the calculation of transonic laminar relative flow fields on the axisymmetric H-S and B-B stream surfaces in turbomachinery, a finite volume method developed in Part (I) is extended. Energy equation is replaced for simplicity by the condition of constant rothalpy throughout the flow fields. For axisymmetric H-S flow the circumferential componets of absolute velocity are given in advance so that this component of momentum equations can be neglected. Some numerical results show good agreement with experimental data.

• 한국수학교육학회지시리즈B:순수및응용수학
• /
• 제20권3호
• /
• pp.149-158
• /
• 2013

In this article, we study the Gauss map of generalized slant cylindrical surfaces (GSCS's) in the 3-dimensional Euclidean space $\mathbb{E}^3$. Surfaces of revolution, cylindrical surfaces and tubes along a plane curve are special cases of GSCS's. Our main results state that the only GSCS's with Gauss map G satisfying ${\Delta}G=AG$ for some $3{\times}3$ matrix A are the planes, the spheres and the circular cylinders.

• 대한소아치과학회지
• /
• 제33권1호
• /
• pp.43-52
• /
• 2006

소아의 치아우식증을 예방하기 위한 불소의 국소도포는 소아치과 영역에서 널리 시행되고 있다. 하지만 이러한 잇점에도 불구하고 최근 수복물 표면을 거칠게 한다는 부작용에 대해 논란이 되고 있다. 이에 본 연구에서는 불소도포가 심미 수복물의 표면변화에 미치는 영향을 평가하기 위해 수종의 복합레진에 국소도포용 불소젤을 도포시킨 후 변화를 관찰하였다. 시판용 레진인 Z 250(3M ESPE, USA) Ultraseal $XT^{(R)}$(Ultradent, USA), Filtek $flow^{(R)}$(3M, USA), $Revolution^{(R)}$(Kerr, USA), Denfil(Vericom, Korea)를 이용하여 시편을 제작하고, 불소젤은 $Topex^{(R)}$(Sultan Dental Products, Canada)을 각각 1분과 4분 동안 도포시켰다. 각 제품마다 불소젤을 도포하지 않은 5개의 시편을 대조군으로 사용하였다. 그 후 이 시편들의 표면 거칠기$(R_a\;value,\;{\mu}m)$와 무게 차이를 측정하고 주사전자현미경을 이용하여 다음과 같은 결과를 얻었다. 1. 불소젤을 도포시키지 않은 대조군에서 가장 평활한 표면을 보였으며 1분군, 4분군 순으로 표면 거칠기가 증가하였다. 그리고 Revolution을 제외한 모든 제품에서 유의한 차이를 보였다(p<0.05). 2. 국소도포용 불소젤을 도포한 각 레진 시편의 무게 차이를 비교한 결과 대조군, 1분군, 4분군 간에 유의한 차이는 없었다(p>0.05). 3. 주사전자현미경 관찰시 불소젤에 도포시킨 실험군은 대조군에 비해 거친 표면을 나타냈다. 이상의 결과로 국소적 불소도포는 복합레진의 표면 거칠기에 영향을 미치며 이를 고려하여 사용한다면 4분보다는 1분간의 불소도포법을 이용하는 것을 추천할 수 있을 것으로 사료된다.대구치의 원심경사는 필연적으로 일어나며, 이를 최소화하기 위한 노력이 계속되어야 할 것으로 사료된다.글래스 아이오노머 시멘트 사이에는 유의한 차이가 없었다.착제의 종류에 따른 전단결합강도를 비교한 결과, 영구치와 유치 모두에서 Clearfil SE Bond를 사용한 군의 전단결합강도가 가장 높았으며 AQ Bond를 사용한 군의 전단결합강도가 가장 낮았다.본에서 III군에 비해 크기가 큰 기포가 더욱 많이 관찰되었다.e의 약동학은 cimetidine에 의해 유의한 차이를 보였으며 CYP1A2유전자형에 따른 영향은 관찰할 수 없었다. CYP1A2유전자형에 따른 생체내 대사능을 관찰하는 실험이 향후 이루어 져야 할 것으로 사료된다.san film보다 큰 수증기 투과도를 보였다.적으로 유의한 차이를 보이지 않았다.y tissue layer thinning은 3 군모두에서 관찰되었고 항암 3 일군이 가장 심하게 나타났다. 이상의 실험결과를 보면 술전 항암제투여가 초기에 시행한 경우에는 조직의 치유에 초기 5 일정도까지는 영향을 미치나 7 일이 지나면 정상범주로 회복함을 알수 있었고 실험결과 항암제 투여후 3 일째 피판 형성한 군에서 피판치유가 늦어진 것으로 관찰되어 인체에서 항암 투여후 수술시기는 인체면역계가 회복하는 시기를 3주이상 경과후 적어도 4주째 수술시기를 정하는 것이 유리하리라 생각되었다.한 복합레진은 개발의 초기단계이며, 물성의 증가를 위한 연구가 필요할 것으로 사료된다.또 다른 약물인 glycyrrhetinic acid($100{\mu}M$)도 CCh 자극으로 인한 타액분비를 억제하였다. 이상의 결과로 미루어 gap junction은 흰쥐 악하선 세포로부터의 타액분비 조절에 중요한 역할을 하는데, 이는 gap junction이 세포막 $Ca^{2+}$ 통로를 조절함으로써 수용체 자극으로 유발된 세포내 $Ca^{2+}$ 농도 변화에

• Journal of electromagnetic engineering and science
• /
• 제12권4호
• /
• pp.260-270
• /
• 2012

This work aims to present a theoretical analysis of the electric and magnetic surface current densities of a circular microstrip antenna (CMSA) as a body of revolution. The rigorous analysis of these problems begins with the application of the equivalence principle, which introduces an unknown electric current density on the conducting surface and both unknown equivalent electric and magnetic surface current densities on the dielectric surface. These current densities satisfy the integral equations (IEs) obtained by canceling the tangential components of the electric field on the conducting surface and enforcing the continuity of the tangential components of the fields across the dielectric surface. The formulation of the radiation problems is based on the combined field integral equation. This formulation is coupled with the method of moments (MoMs) as a numerical solution for this equation. The numerical results of the electric and magnetic surface current densities on the outside boundary of a CMSA excited by $TM_{11^-}$ and $TM_{21^-}$ modes are presented. The radiation pattern is calculated numerically in the two principle planes for a CMSA and gives a good results compared with measured results published by other research workers.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 춘계학술대회 논문집
• /
• pp.660-665
• /
• 2002

Mirror surface finish of Si-wafers has been achieved by rotary in-feed machining with cup-type wheels in ELID grinding. But the diameter of the workpiece is limited with the diameter of grinding wheel in the in-feed machining method. In this study, grinding experiments by the rotary surface grinding machine with straight type wheels ware conducted, by which the possible grinding area of the workpiece is independent of the diameter of the wheels. For the purpose of investigating the grinding characteristics of large scale diametrical silicon wafer, grinding conditions such as rotation speed of grinding wheels and revolution of workpieces are varied, and grinding machine used in this experiment is rotary type surface grinding n/c equipment with an ELID wit. The surface ground using the SD8000 wheels showed that mirror like surface roughness can be attained near 2 - 6 nm in Ra.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.806-809
• /
• 2000

The factors which can improve tool life in machining are consisted of tool geometries, tool materials, coating methods. cutting environments, cutting conditions and so on. Cutting speed in cutting conditions is one of the important factors which can directly influence on the tool life. This paper deals the machinability which is concerned about the cutting direction and the tilt angle of fret form surface in hot die steel(STD I I). The NC datum were analysrd and the effective tool diameters were calculated according to the change of tilt angle the program which can continue the cutting speed with the change of spindle revolution is developed.

• 소성∙가공
• /
• 제27권3호
• /
• pp.145-153
• /
• 2018

Magnesium material could be widely used in the automotive industry because of its high strength to weight ratio, but the electric resistance spot welding process of magnesium sheets is difficult because of its low electric resistance and high thermal conduction and thermal expansion. For this reason, an electric resistance surface friction spot welding process using rotating dies is suggested for the spot welding of magnesium metal sheets. This welding method can be characterized by three heating methods: (1) electric resistance heating on contacted surface, (2) surface friction heating by rotating dies, and (3) thermal conduction heating from heated steel electrodes, for the fusion of metal at the interfacial zone between the two magnesium sheets. This welding process also has variables to explore, such as welding currents, diameters of the steel electrode, and rotating dies. It was found that the welding strength could reach industrial requirements by applying a welding current of 11.0kA, with steel electrodes of 12mm diameter, with rotating dies of 4.4 mm diameter, under the condition of a revolution speed of 1200rpm of rotating dies, for the surface friction spot welding process of AZ31 magnesium alloy sheets of 1.4mm thickness.

• 한국정밀공학회지
• /
• 제13권6호
• /
• pp.59-65
• /
• 1996

There are many difficulties in automatic polishing for die & mold surfaces. Even though the process has been studied in the past 15 years, it has not been achieved yet, but by the process of actual hand work of well-skilled workers. A new magentic assisted polishing process, which is one of the potential methods for automation of surface finishing has been studied in the past 10 years by colleagues. The process has many merits, but on the other hand also has demerits, one being low efficiency of grindability by comparision with wheel polish. Therefore, some attempts were tried to improve the grindability by adopting electropolishing, ultra-high speed milling, 5-axis controlled machine etc... most recently by colleagues. This paper also aims to improve the efficiency of polishing by introducing the easily-polished shape surface cutting method equalizing the tool feed per revolution to the pick feed. This cutting method was experimentally confirmed to have sufficient grindability to polish milled surface (with $10{{\mu}m}$Rmax surface roughness) into mirror surface (with $0.4{{\mu}m}$Rmax surface roughness).

• 한국광학회:학술대회논문집
• /
• 한국광학회 1990년도 제5회 파동 및 레이저 학술발표회 5th Conference on Waves and lasers 논문집 - 한국광학회
• /
• pp.29-33
• /
• 1990

Efficient numerical method is developed for treating electromagnetic problems of scattering and radiation from surfaces. Special consideration is given to the treatment of edges so that rather arbitrary geometrical configurations may be handled. For the conducting body problems considered, an electric field integral formulation is used, and the method of moments is applied using pulse expantions to present currents. Numerial results indicate that the approach is free os anomalies in the behavior of current for body of revoution.

• 한국기계가공학회지
• /
• 제11권3호
• /
• pp.68-72
• /
• 2012

Al2017 is typical Duralumin of self-hardening aluminum alloy. It is lightweight, formability and machinability so throughout the industries have widely used automobile, electronics, semiconductor and aircraft as material. A variety of CNC machine tool processing technology, scientific principles and experience have been studied in order to increase accuracy and productivity. Using a machining center is to constant amount of side step and cutting characteristics studied changing depth of cut, revolution per minute and feed rate.