• 한국해양환경ㆍ에너지학회지
• /
• 제8권3호
• /
• pp.140-147
• /
• 2005

본 연구는 영일만 수괴의 만내 연안수와 동해 고유수와의 상호관련성과 만내 해수순환류 발생 메카니즘에 대해서 고찰하고자 하였다. 영일만 인근 동해 고유수는 평균수온 $12.2{\sim}18.4^{\circ}C$, 평균염분 $33.32{\sim}34.43$ PSU 인 것으로 나타났으며, 스펙트럼 해석결과를 통해 만내 연안수와 동해 고유수는 서로 일정한 주기성을 가지고 있으며, 표층과 저층 모두 약 0.84-0.91년, 1.84년의 주기를 나타내었다. 영일만에 출현하는 바람은 동계를 제외하고 대체로 SW와 NE방향의 왕복성 풍향을 나타내며 동계의 경우에는 SW방향의 풍향이 주로 출현하며, 이는 영일만내 수괴거동에 크게 영향을 미칠 것으로 판단된다. 영일만내에서의 하구 해수순환류는 표층에서 형산강 담수의 외해로의 유출과 저층에서 저온-고염의 동해 고유수가 유입되는 현상이 뚜렷하며, 이는 수괴가 안정되는 봄부터 시작하여 여름에 가장 뚜렷하게 나타나며, 그 발생주기는 단주기변동으로 약 10일정도의 주기를 가진다. 이러한 해수의 수평 연직순환류는 조석영향이 미약한 영일만의 경우 내만의 오염물질을 외해로 수송하는 큰 역할을 담당할 것으로 판단된다.

• Restorative Dentistry and Endodontics
• /
• 제26권4호
• /
• pp.332-340
• /
• 2001

Flowable composite resin has lower filler content, increased flow, and lower modules of elasticity. It is suggested that flowable composite resin can be bonded to the tooth structure intimately and absorb or dissipate the stress. Therefore, it may be advantageous to use flowable composite resin for the base material of class II restoration and for the class V restoraton. The purpose of this study was to evaluate the microleakage and shear bond strength of four flowable composite resins (Aeliteflo, Flow-It, Revolution, Ultraseal XT Plus) compared to Z100 using Scotchbond Multi Purpose dentin bonding system. To evaluate the microleakage, notch-shaped class V cavities were prepared on buccal and lingual surfaces of 80 extracted human premolars and molars on cementum margin. The teeth were randomly divided into non-thermocycling group (group 1) and thermocycling group (group 2) of 40 teeth each. The experimental teeth of each group were randomly divided onto five subgroups of eight samples (sixteen surfaces). The Scotchbond Multi-Purpose and composite resin were applied for each group following the manufacturer's instructions. the teeth of group 2 were thermocycled five hundred times between 5$^{\circ}C$ and 55$^{\circ}C$. The teeth of group 2 were placed in 2% methylene blue dye for 24 hours, then rinsed with tab water. The specimens were embedded in clear resin, and sectioned longitudinally with a diamond saw. The dye penetration on each of the specimen were observed with a stereomicioscope at $\times$20 magnification. To evaluate the shear bond strength, 60 teeth were divided into five groups of twelve teeth each. The experimental teeth were ground horizontally below the dentinoenamel junction, so that no enamel remained. After applying Scotchbond Multi-Purpose on the dentin surface, composite resin was applied in the shape of cylinder. The cylinder was 4mm in diameter and 2mm in thickness. Shear bond strength was measured using Instron with a cross-head speed of 0.5mm/min. After shear bond strength measurement, mode of failure was evaluated with a stereomicroscope at $\times$30 magnification. All data were statistically analyzed by One Way ANOVA and Student-Newman-Keuls method. The correlation between microleakage and shear bond strength was analyzed by linear regression. The results of this study were as follows ; 1. In non-thermocycling group, the leakage value of Z100 was significantly lower than those of flowable composite resins at the enamel and dentin margin, margin, except that Revolution showed the lower leakage value than that of Z100 at the dentin margin (p<0.05). 2. In thermocycling group, the leakage values of Z100 and Ultraseal XT Plus were lower than those of other subgroup at the enamel and dentin margin, except that Flow-It showed the lower leakage value than that of Ultraseal XT Plus at the dentin margin (p<0.05). 3. The leakage value of Z100 and Ultraseal XT Plus in thermocycling group were not higher than that in non-thermocycling group at the enamel margin. The leakage value of Z100 in thermocycling group was not higher than that in non-thermocycling group at the dentin margin (p<0.05). 4. As for the shear bond strength measurement, there were no statistically significant differences among groups (p<0.05). The shear bond strengths given in descending order were as follows: Z100(16.81$\pm$2.98 MPa), Flow-It(14.8$\pm$4.43 MPa), Aeliteflo(14.34$\pm$3.69 MPa), Revolution(13.46$\pm$4.23 MPa), Ultraseal XT Plus(12.83$\pm$3.16 MPa). 5. Failure modes of all specimens were adhesive failures. 6. There was no correlation between microleakage and shear bond strength.

• 한국항해항만학회지
• /
• 제46권1호
• /
• pp.1-10
• /
• 2022

본 연구는 제4차 산업혁명 기술에 의해 선박의 자동화와 지능화가 진전되면서 자율운항선박이 도입되게 됨에 따라 해기사 인력수요축소와 직능 전환 등의 문제가 대두되는 상황에서 해기사의 직무변화와 이에 따른 요구 역량을 분석하고 이를 배양하기 위한 인력양성 방향을 제시하였다. 선행연구 검토와 전문가 집단의 브레인스토밍과 AHP 설문조사를 통해 자율운항선박의 해기사 직무와 역량 요인을 도출하고 그 중요도를 평가하였다. 해기사 승선 자율운항선박의 해기사 직무 중에서 안전 운항과 비상시 대응 그리고 화물의 안전운송 관련 직무요인이 중요한 것으로 나타났으며, 자율운항시스템의 제어 및 운용 역량의 중요성이 매우 높으며 이를 뒷받침하기 위한 육·해상 커뮤니케이션과 AI 및 Big Data 분석 역량이 필요한 것으로 나타났다. 완전자율운항선박의 해기사 직무는 예상하지 못한 비상상황에 대비하여 선박을 안전하게 원격운항시키는 비상상황대처, 원격운항제어, 선박정비·관리 직무 순으로 중요도가 높으며, 해기사 역량에서는 자율운항시스템 제어와 운용 그리고 이를 수행하기 위한 Big Data 와 AI 활용 역량들의 중요도가 매우 높은 것으로 분석되었다, 이러한 요인들의 직무역량 함양을 위한 해기인력 양성 방향과 규모는 기술의 진보에 따라 크게 달라질 수 있는 점을 고려하여 자율운항선박 도입단계별로 필요한 해기사 교육 프로그램과 직무교육 내용 그리고 핵심역량 함양을 위한 교육인프라 구축 방안을 제시하였다. 이 연구는 자율운항선박의 해기사 직무 및 역량 요인을 실무적 관점에서 체계적으로 도출하였으며, 관련 전문가별 인식도를 분석함으로써 자율운항선박 도입에 대한 전문가 차원의 대응 방안을 진단하였다는데 연구의 의의가 있다.

• 대한가정학회지
• /
• 제38권1호
• /
• pp.25-38
• /
• 2000

This study focuses on the Russian Constructivist Textile Design in the post-revolutionary period, of the early 20th century. Russian textile of the time is highly valued in the west in terms of innovative changes in aesthetic directions, which has become one of the most important centers for the development of new textiles, or the origin of industrial design. Most of brilliant mass-production patterns were produced specially by the pioneers of constructivists such as Stepanova and Popova who were influenced by 'Maxism' through the Revolution regarded themselves as productivists for the proletariat. They were inspired by the avant-garde movements, which were involved with traditionalism, futuristic mechanism, stylization of nature, pure geometrical and abstract form. Early textile design was based on the relationship between the graphic methods of design and the technology because they regarded art as physical, intellectual and technical production. They created all the excitement made from the primary simplest forms of precise mathmatical shapes, such as the circle, the triangle, the rectangle and horizontle and vertical lines. These geometric design can be interpreted as the mechanization of the artists'labor, or methods in line with the technology of mass production, however partly roots in the rich tradition of Russian decorative art. On the other hand, stable crystalline construction on the surface reflect urban architectural complex, and the world of industry in graphic form. They were interested in illusion of movement, cinematic movement of vertical linear rhythms, optical formations and vibrations, by composing a multi-leveled constructions by several spatial planes, or color-field, and combining structures of several intersecting matrices, and superimposing parts of the forms on each other. All these characteristics of the Russian textile designs reflect the complex interactions between 'art and society' of Constructivist's idea and represent the traits of the epoch.

• 한국공작기계학회논문집
• /
• 제17권2호
• /
• pp.65-70
• /
• 2008

This study deals with the friction welding of SKH55 and SM45C; The friction time was variable conditions under the conditions of spindle revolution 2,000rpm, friction pressure of 190MPa, upset pressure of 270MPa and upset time of 2.0 seconds. Under these conditions, the microstructure of weld interface, tensile fracture surface and mechanical tests were studied, and so the results were as follows. 1. When the friction time is 1.0 seconds, the tensile strength of friction welds was 926MPa, which is around as much as 84% of the tensile strength of base metal(SKH55), the bending strength of friction welds was 1,542MPa, which is around as much as 80% of the bending strength of base metal(SKH55), the shear strength of friction welds was 519MPa, which is around as much as 70% of the shear strength of base metal(SKH55). 2 According to the hardness test, the hardness distribution of the weld interface was formed from 964Hv to 254Hv. HAZ(Heat Affected Zone) was formed from the weld interface to 1.5mm of SKH55 and 2mm of SM45C.

• Journal of Welding and Joining
• /
• 제26권2호
• /
• pp.55-61
• /
• 2008

Various research to reduce weight of a car is achieving. This research is tendencious to manufacture solid piston rod of shock absorber as hollow piston rod using friction welding. This study deals with the friction welding of SM45C to SM45C-Pipe that is used in car shock absorber, The friction time was variable conditions under the conditions of spindle revolution of 2,000rpm, friction pressure of 55MPa, upset pressure of 75MPa, and upset time of 2.0seconds. Under these conditions, the microstructure of weld interface, tensile fracture surface and mechanical tests were studied of friction weld, and so the results were as follows. 1. In tensile strength, the hole processing is better than non-hole processing. 2. When the friction time was 1.5seconds under the conditions, the maximum tensile strength of the friction weld happened to be 869MPa, which is 103% of SM45C's tensile strength and 91% of SM45C's Pipe. 3. When the friction time was 2.0seconds under the conditions, the maximum bending strength of the friction weld happened to be 1599MPa, which is 80% of SM45C's bending strength and 118% of SM45C's Pipe.

• 영어영문학
• /
• 제56권2호
• /
• pp.219-236
• /
• 2010

As a poet, a reviewer of books, and an editor of a major literary journal, Marianne Moore participated in aesthetic revolution which invented the American poetry of the twentieth century. Of all the modernists, she was one of the few truly technical originals, and became an endearing mascot of poetry. Innately attentive to detail, Moore wrote a myriad of poems about animal and plant subjects, and set out to develope and secure her own particular paradigm for modernist poetic and the poetry of objective and scientific description. Foregrounding a mind scientifically trained, Moore used her verse to demonstrate a means by which to see the reality beyond the obvious. Ironically enough, however, a central difficulty with understanding Moore's poetry lies with her concern for such scientific or surface description and precision. In order to understand Moore's poetry fully, it is of special necessity to appreciate relativity among the seemingly disparate entities such as science and literature, as Moore herself did. This paper explores the way in which the poetic techniques of Moore substantiate her sense of morality that underlies the creation of her poetry. Rather than merely addressing her artistic genius or craftsmanship as a modernist poet, Moore's methods engage the power of imagination, magic, lifting the human spirit and eschewing anthropocentric perspectives. For Moore, the poet's magic comes by diligence. In so doing, as I would argue here, Moore draws on the nature of language, especially what Bakhtin insisted with his notions of polyphony and carnival. By introducing openness to various perspectives and meanings in her verse, Moore succeeds in maintaining her own sense of creativity while continuing to acknowledge morality. In a similar skein, her use of active verbs in animal poems and the kaleidoscopic descriptions demonstrate how Moore accommodates imagination and reality, and form and content.

• 한국공작기계학회논문집
• /
• 제15권1호
• /
• pp.63-69
• /
• 2006

This study deals with the friction welding of A2024- T6 to A6061- T6; The friction time was variable conditions under the conditions of spindle revolution of 2000rpm, friction pressure of 50MPa, upset pressure of 100MPa, and upset time of 5.0seconds. Under these conditions, the microstructure of weld interface, tensile fracture surface and mechanical tests were studied, of friction weld, and so the results were as follows. 1. When the friction time was 1.5seconds under the conditions, the maximum tensile strength of the friction weld happened to be 292MPa, which is $94.2\%$ of the base material's tensile strength(310MPa). At the same condition, the maximum shear strength was 2l2MPa, which is equivalent to $103\%$ of the base material's shear strength (205MPa). 2. At the same condition, the maximum vickers hardness was Hv 146 at A2024- T6 nearby weld interface, which is higher Hv3 than condition of the friction time 0.5seconds, and the maximum vickers hardness was Hvl20 from weld interface of A6061-T6, which is higher Hv28 then base material's. 3. The results of microstructure analysis show that the structures of two base materials have fractionized and rearranged along a column due to heating and axial force during friction, which has affected in raising hardness and tensile strength.

• 한국자동차공학회논문집
• /
• 제12권6호
• /
• pp.158-165
• /
• 2004

The DC motor in a vehicle may cause noise and vibration because of high speed revolution, which can make a driver feel uncomfortable. There have been various studies attempting to solve these problems, focusing mostly on the causes of and ways to reduce noise and vibration. It is suggested that the noise in a DC motor may be primarily due to interaction between a brush and a commutator. Brush noise, the most common noise in a DC motor, results from a brush bounced from the surface of the commutator, fluctuation of the friction between the brush and the commutator, and the impact on the brush when passing over slots of the commutator. Based on the noise test, one of the most important design parameters was shown to be the roundness of the commutator. As the DC motor is used, the roundness of the commutator gets bigger with subsequent increase of the level of brush noise and vibration. There must be a threshold in order to prevent the brush noise from getting worse. Using the method of CAE is more efficient than the real test for purposes of looking for various design parameters to maintain the roundness of the commutator. In this study, the design process to reduce the brush noise is presented with the use of a computer model. The design parameters to reduce the brush noise and vibration are proposed by using FEM. The design parameters are used to reduce the noise and vibration of a DC motor and it is verified with the test results on a fan DC motor in a vehicle. This method may be applicable to various DC motor.

• 한국공작기계학회논문집
• /
• 제17권4호
• /
• pp.42-50
• /
• 2008

Various researches to reduce weight of a vehicle are achieving. One of these researches is tendencious to manufacture the hollow piston rod using friction welding instead of solid one of the vehicle shock absorber. This study deals with the friction welding of SM45C to SM20C-pipe that is used normally in the vehicle shock absorber. The friction time was variable conditions under the conditions of spindle revolution of 2,000rpm, friction pressure of 55MPa, upset pressure of 75MPa, and upset time of 2.0seconds. Under these conditions, the microstructure of weld interface, tensile fracture surface and mechanical tests of friction weld were studied and so the results were as follows. When the friction time was l.5seconds under the conditions, the maximum tensile strength of the friction weld happened to be 837MPa, which is 113% of SM20C's tensile strength and 97% of SM45C's. The optimal welding conditions were n=2,000rpm, $P_1=55MPa$, $P_2=75MPa$, $t_1=1.5sec$, $t_2=2.0sec$ when the total upset length is 1.7mm.