• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2002.10b
• /
• pp.147-148
• /
• 2002

This study made use of four kinds of mating balls that were made with stainless steel but subjected to different annealing conditions in order to achieve different levels of hardness. In all load conditions, testing results demonstrated that the harder the mating materials, the lower the friction coefficient was. Conversely, the high friction coefficient found in soft martensite balls appeared to be caused by the larger contact area between the DLC film and the ball. Raman Spectra analysis showed that the transferred materials were a kind of graphite and that the contact surface of the DLC film seemed to undergo a phase transition from carbon to graphite during the high friction process.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.6 no.2
• /
• pp.115-123
• /
• 2003

Oviposition and egg laying is an important physiological and behavioural event in the life cycle of the silkworm, Bombyx mori (L). Oviposition and egg laying is dependent on a number of intrinsic and extrinsic factors viz., neural, hormonal, environmental, physical, behavioral etc for the perpetuation of population. Although, the virgin female moths have fully developed embryos but active egg laying begins under the influence of mating which provides essential copulation stimulus for oviposition. After mating drastic biochemical changes occurred that incites egg laying under the influence of optimum environmental conditions. Weight of pupae as well as larval density has significant role on oviposition and egg laying behaviour in the silkworm wherein high pupal weight and inadequate rearing space affects not only the biology, morphology and physiology but also the oviposition and egg laying. Surface topography, plane of inclination, mating length, age of male moth, temperature and photoperiod etc has significant effect on reproductive physiology of silkworm. An attempt has been made in this review article to elucidate briefly the works carried out on mating behaviour, direct and indirect copulation stimulus, vitellogenesis, influence of environmental factors besides effect of weight of pupae and or pharate adult and larval density on oviposition and egg laying behavior in the silkworm, B. mori and its significance in silkworm seed production.

• Animal cells and systems
• /
• v.11 no.2
• /
• pp.141-146
• /
• 2007

Cantharidin is produced by blister beetles (Coleoptera: Meloidae) and smaller oedemerid beetles (Coleopetra: Oedemeridae) and is found in hemolymph and various tissues. The function of cantharidin in the courtship behaviour of meloids had never been fully established. Our studies show a correlation between density of cuticular pores and cantharidin titre of the scape and pedicel segments of male specimens of the East African species of Epicauta nyassensis (Haag-Rutenberg, 1880) (Coleoptera: Meloidae). Light microscopy of semi-thin cross sections of the male scape and pedicel indicates that there are many canal shaped structures that stretch from the antennal hemolymph to the antennomere surface. These structures may be tubules, which transport cantharidin circulating in the hemolymph to the surface, where the compound can be released via cuticular pore openings. Analyses of the head capsule and antennal segments of E. nyassensis females which had been copulated with males revealed low titre of cantharidin in the first two antennal segments. The density of the scape and pedicel pores of females was to some extent higher than the density of these pores on flagellum; however it was considerably lower than that of the males. Interestingly, no tubular cell or other transport structures were found in the cross sectioning of the female antennomeres or on the integument surface. During mating, male antennomeres, as well as cantharidin containing pores which are located on the $1^{st}\;and\;2^{nd}$ antennomeres, come into direct contact with the female antennae and may release cantharidin to their surface. Female E. nyassensis may be able to discriminate the opposite sex with abundant reserves of cantharidin prior to mating. This is another evidence that cantharidin function in close range sexual selection.

• Journal of Mushroom
• /
• v.11 no.1
• /
• pp.1-8
• /
• 2013

In this study, twelve of Lepista nuda were collected from various localities in Korea. Also thirteen exotic L. nuda species were collected from Japan, France, Switzerland and Portugal. Spores were isolated under optical microscope. These spores were placed on the surface of YM medium for inducing to germination. Eleven mating-groups were selected by morphological characters of fruit body such as size, color and stipe patterns. Intra-isolate crosses were made between two single-spore isolates derived from mating-groups. Also, dikaryotic crossing using the isolates from L. nuda were carried out to evaluated tetrakaryon formation. Cross-mating compatibility tests also verified its dikaryotic state by microscopic or molecular genetic observation of clamp connection and Random Amplified Polymorphic DNA (RAPD) band pattern. To analyze the growth rate of hybrids and parents mycelium in dikaryons obtained from compatible mating groups were placed on PDA medium. Intra-isolate crosses determined eleven mating-groups within L. nuda. The typical clamp connection were mostly observed in mating-groups of Korean L. nuda in $K1{\times}K2$, $K1{\times}K3$, $K1{\times}K4$, $K1{\times}K6$, $K1{\times}K5$, $K2{\times}K4$, $K2{\times}K3$, $K2{\times}K6$, $K3{\times}K4$, $K4{\times}K5$, and $K4{\times}K6$. Korean L. nuda type of dikaryon, shown to cross-incompatibility with L. sordida, it seemed that mating induce more rapidly than wild types in a view of growth rate. In conclusion, it would be useful to improve mass production with better morphological characteristics through a special mating of L. nuda.

• Tribology and Lubricants
• /
• v.27 no.5
• /
• pp.240-248
• /
• 2011

Mechanical face seal installed in primary heat transport pump used for heavy water reactor prevents leakage of working fluid using thin working fluid film between primary seal ring and mating ring. If the leakage of working fluid exceeds the allowable volume, serious accident can be happened by the trouble of primary heat transport pump. The thinner fluid film exists between primary seal ring and mating ring, the less working fluid leaks out. On the other hand, if the thickness of fluid film is not enough, the life of mechanical face seal will be reduced by friction and wear. Therefore appropriate design is necessary to maximize the performance and life of mechanical face seal. In this study, numerical analysis using finite volume method was conducted to investigate the performance of mechanical face seals which have same deep straight groove and 11 different net coning values. As results, equilibrium clearance between primary seal ring and mating ring, leakage volume of working fluid, friction torque on sealing surface and stiffness of working fluid film were obtained. With increasing net coning value, equilibrium clearance and leakage volume increase, and friction torque and stiffness of fluid film decrease.

• Microbiology and Biotechnology Letters
• /
• v.18 no.3
• /
• pp.317-321
• /
• 1990

The broad-host plasmid PAM $\beta_1$ of Streptococcus faecalis DS 5 which codes for erythromycin resistance and lactose utilization was transferred into L. casei M-3 (lac-mutant) by conjugation, but was not transferred by protoplast fusion and protoplast transformation. For conjugal transfer of plasmid PAM $\beta_1$ the method of membrane filter mating was more efficient than that of agar surface mating. The rate of acid production of transconjugant C-1, C-3 was similar to L. casei YIT 9018. The proteolytic activity of transconjugant C-3 was increased 20% higher than that of wild type. Plasmid PAM $\beta_1$ was detected by a11 of the transconjugants. The transconjugants expressed lactose ulitization and erythromycin resistance.

• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1451-1453
• /
• 2003

Shrink fitting is often used to replace conventional mechanical fasteners and fastening methods. Localized heating of the mating surface provides temporary expansion and allows slip fit assembly. The resulting interference fit exhibits exceptional strength without surface deformation at ambient temperatures. We studied an analysing method to find out a deformation of motor axis with shrink fitting of thermal expansion.

• Journal of Advanced Marine Engineering and Technology
• /
• v.10 no.2
• /
• pp.136-145
• /
• 1986

The perfect and accurate methods to control the wear are not made clear so far. For this phenomenon only mating surface has been studied. In order to control the wear the essence of it has to be made clear. It is reported that adhesive wear might occure as a result of plastic deformation, the fracture and removal or transfer asperities on close contacting surfaces. On this view point the plastic flow was attempted to compare with fluid or electromagnetic flow. The partial differential equations of equilibrium for the plane strain deformation will make use of the method of characteristics. The characteristic curves or characteristics of the hyperbolic equation coincide with the slip lines by R. Hill's papers. By Hencky's stress equation, it is evident that if P and .phi. are prescribed for a boundary condition then it may be possible to proceed along constant .alpha. and .betha. lines to determine the value of the hydrostatic pressure everywhere in the slip line field net work. A wedge formation mechanism has been considered for an explanation of this matters. The analysis shows that there is a critical value, which depends on the hardness ratio and the shear stress on the interface, for the top angle of asperity is less than this critical value, the asperity can yield plastically despite of being harder than the mating surface.

• Tribology and Lubricants
• /
• v.16 no.2
• /
• pp.106-113
• /
• 2000

Effects of surface roughness on bearing performances are investigated numerically in this study, especially for the parallel thrust bearing. Although mating surfaces are parallel and separated by thin fluid film, the pressure distribution is formed due to asperities. Model surface is generated numerically with given autocorrelation function and some surface profile parameters. Then the average Reynolds equation is applied to predict the effects of surface roughness between hydrodynamic and mixed lubrication regimes. In this equation, flow factors are defined as correction terms to smooth out high frequency surface roughness. The correlation length is proposed to get the minimum load for the parallel thrust bearing for various sliding conditions.

• Tribology and Lubricants
• /
• v.2 no.1
• /
• pp.61-68
• /
• 1986

Effects of the ram-pressure on the THD-performance of pivoted pad thrust bearings are investigated experimentally. A sector-shaped tilting pad thrust bearing and a rotating disk are used. Temperature distribution on the disk surface as well as on the pad surface, distribution of the pressure generated within the fluid film, and the film thickness are measured continuously in the circumferential direction after thermal equilibrium is established. The ram-pressure is proportional to the mean pressure of oil film and to the rotational speed of the disk and affects the maximum pressure and the pressure distribution. The temperature rise on the mating surface of the disc and the pad, contacting with the oil film, is proportional to to the bearing load and the disk speed. The ram-pressure and the temperature rise on the disk surface are dominant factors that affect the THD-performance of pivoted pad thrust bearings.