• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.05a
• /
• pp.318-321
• /
• 2007

This paper is concerned with improvement of surface quality of a sheet metal member in the stamping process. The CAE procedure of the stamping process is utilized in order to investigate cause of surface troubles and to improve surface quality. A complicated shape of the sheet metal member can induce surface troubles such as wrinkles because of insufficient tensions force and non-uniform contact of a blank sheet with tools. This paper proposes two guidelines such as a change of tool shape and added draw-beads on the tool surface in order to increase tension forces and to induce uniform contact. The proposed guidelines are verified with the CAE of the stamping process. The CAE results show that the changed shape of tools and added draw-beads can reduce the amount of wrinkles and improve surface quality.

• Journal of Korean Society of Water and Wastewater
• /
• v.13 no.2
• /
• pp.41-46
• /
• 1999

Backwashing is an important process for the efficient operation of granular filters, and the efficiency of the surface washing among the backwashing processes can affect the filtrations rate and filter run-time. In this study, the efficiency of surface washing is evaluated using real filters for three cases: with surface washing (with and without drainage of water to the surface of filter bed) and without surface washing. As a result, in the case of adopting both the drainage and surface washing, the filter of which condition is initially worse than those of the other filters shows improvement in head-loss development, filtration velocity, filter run-time, and total filtration volume. On the other hand, the conventional method of surface washing rarely has an effect on the filter washing.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.7
• /
• pp.36-43
• /
• 1998

Surface roughness of cold rolled steel sheet as well as the coating technique itself is quite important in obtaining high image clarity of electronic products and car outer panels. Especially, surface characteristics of steel sheet have acquired increasing attention from the steel and automotive industries. While the influence of such characteristics on paintability formability and painted surface appearance is important in defining steel surface requirements for automotive industries. Therefore this paper is dedicated primarily to the issue of paint appearance and reviews for improvement of roughness and peak count about the surface of work roll for the actual temper mill. The conclusions were obtained as follows ; 1) Roughness and peak count about the surface of steel sheet is strongly affected by surface condition of work roll. 2) The electro-discharge textured roll has more uniform roughness distribution than shot blasted roll and it's painted appearance of steel sheet has more improvement than that of the shot blasted because it has more harmonic wave roughness, and the higher peak count of surface roughness.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.629-630
• /
• 2010

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.1191-1192
• /
• 2010

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.40 no.3
• /
• pp.9-14
• /
• 2008

Agar-agar extracted from red algae was used as a surface sizing material for paper after filtering, bleaching, and viscosity adjustment by oxidative depolymerization. Oxidized starches from corn and tapioca were compared to agar-based surface size in the respects of paper surface modification, strength improvement, and printability. Agar-based surface size showed high strength improvement and good printability as much as starch-based ones except film forming ability, which may be improved by adding additives, and demonstrated its great potential to be used as inexpensive and high quality surface size in future.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.21 no.1
• /
• pp.67-76
• /
• 2015

Purpose : The current tactile walking surface indicators have not been easily accessible to blind and vision-impaired people due to unexpected variation of walking environment and walking behavior of transportation poor. Moreover, those indicators frequently cause the inconvenience to transportation users' walking. Thus, this study aims to investigate the improvement of tactile walking surface indicators, by comparing and analyzing findings from the relevant research. Results from this study contribute to suggest the better standard criteria of tactile walking surface indicators for transportation users, especially blind and vision-impaired people, the handicapped, the child and the elderly and weak, providing the secure and convenient circumstance for walking. Method : This study presents the problems about the standard criteria of tactile walking surface indicators via the examination of finding from the past studies. For example, we examine all standard criteria, focusing on shapes, colors and qualities of materials used for Tactile Walking Surface Indicators. Then, the present study suggests the improvement of standard, which apply to the current walking environment practically and reasonably. Results : To improve the current condition of tactile walking surface indicators, the analysis on international and domestic standard criteria need to be conducted. Findings from these analyses helps to suggest the better criteria for the interval between projecting points of tactile walking surface indicators, effective perceived range of walking road, and the brightness contrast between tactile walking surface indicators and finishing materials. Implication : The suggested standard criteria of tactile walking surface indicators need to be tested by transportation users, and the practical instructions of establishing tactile walking surface indicators should also be developed.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.15 no.6
• /
• pp.32-37
• /
• 2006

Micron size Co-alloy(T800) powder was coated on Inconel 718 by HVOF thermal spraying for the studies of the improvement of durability of high speed spindle by using Taguchi program for the parameters of spray distance, flow rates of hydrogen and oxygen and powder feed rate. The optimal coating process was determined by the studies of coating properties such as micro-structure, porosity, surface roughness and micro hardness. Friction and wear behaviors of coatings were investigated by sliding wear test at room temperature and $1000^{\circ}F(538^{\circ}C)$. At both room temperature and $538^{\circ}C$ the sliding wear debris and friction coefficients of the coating were drastically reduced compared with the surface of non-coated parent material. This shows that Co-alloy powder coating is highly recommendable for the durability improvement surface coating of high speed air-bearing spindle. At high temperature wear traces and friction coefficients of both coating and non-coating were drastically reduced compared with those of room temperature since the brittle oxides were formed easily on the surface, and the brittle oxide phases were attrited by the reciprocating sliding wear according to the complicated mixed wear mechanisms These oxide particles, partially melts and the melts play role as lubricant and reduce the wear and friction coefficient. This also shows that Co-alloy powder coating is highly recommendable far the durability improvement surface coating on the surface vulnerable to frictional heat such as high speed spindles.

• Journal of Ocean Engineering and Technology
• /
• v.11 no.2
• /
• pp.138-144
• /
• 1997

This is describes the automatic mesh generation on the ship hull surface. At first ship hull is defined as a cillocation of composite surface patches which satisfy the geometic continuity between adjoining patches by using Gregory surface method. Node points that would be mesh points are ganerated by considering the surface curvature. The triangulation of the node points is by the combination of Ohtsubo's method and Choi's one. After triangulation, shape improvement and quadrilateralization is done with specific criterin. An application to the actual ship and the results are shown.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.959-963
• /
• 1996

Hardened layer and compressive residual stress created by carburized treatment effect on bending fatigue strength of gear massively. Also, shot peening treatment improves the strength of carburized gear as it does the hardness and residual stress of surface layer. In these days shot peening techniques are welcomed as one of physical improvement ways around the surface of materials. It is used widely because qualitative analysis of shot peening has become possible and surface treatment can be done with very little costs compared to other surface improvement methods. Therefore this study investigates the effect of shot peening in surface shape and bending fatigue strength after doing many kinds of shot peening treatments, then doing fatigue test and also explained characteristics of shot peening gear.