• 한국세라믹학회지
• /
• 제23권6호
• /
• pp.1-6
• /
• 1986

The hydration of $C_3A$ and $C_3A-CaSO_4$.$2H_2O$ was investigated with varying concentration (0.1-1.0%) of sodium gluconate solution. gluconate solution. Sodium gluconate accelerates cation dissolution from $C_3A$ for the first several minutes but depresses the rate of heat evolution in the course of $C_3A$ hydration. The hydration of $C_3A$ in the presence of sodium gluconate was modified such that the formation of the intermediate hydrate C4AH$\chi$ crystal was much reduced and most of the product became amorphous. The retardation of $C_3A-CaSO_4$.$2H_2O$ hydration in the presence of sodium gluconate was controlled by the competitive adsorption between gluconate anion and $SO_4^{-2}$ onto $C_3A$ surface.

• 한국건축시공학회지
• /
• 제12권5호
• /
• pp.460-467
• /
• 2012

When recycled aggregate with old mortar and particles is used in concrete mixing, such aggregates can affect hydration reaction by promoting or inhibiting it. In this study, the possibility of hydration reaction on old mortar and particle was analyzed. Hydration reaction was carried out in old mortar that is finely crushed by an impact machine in the production of recycled aggregates, and it was found that this did have an impact on the strength development of concrete. Unlike in old cement, the hydration reaction did not progress in the particles, and it had high amounts of silica powder and calcium carbonate. In conclusion, the old mortar can have the influence of improving compressive strength, but the particles can delay the setting time of recycled aggregate concrete.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1996년도 가을 학술발표회 논문집
• /
• pp.352-357
• /
• 1996

In hardening massive concrete, the heat of hydation gives rise to considerable thermal gradientsand thermal stresses, which might cause early age cracking. This paper deals with the results of evaluation of hydration heat of low hear concrete, using Belite rich cement (low heat cement) and compared with OPC, slag added cement and fly ash addedcement. Result of evaluation of hydration are presented in this paper. The concrete made with Belite rich cement gets low temperature of center point and low thermal gradients between surface and center points.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.533-535
• /
• 2004

We suggest the use of a self-assembled ultra thin organic film that can suppress the hydration of MgO protective layer in AC-PDP. We analyzed the degree of hydration of MgO layer in AC-PDP by XPS when exposed to air after vacuum deposition which proved the effectiveness of the hydration prevention. We also made PDP test panels to demonstrate the improvement in the luminance and luminous efficiency when the hydration of MgO surface is suppressed by the use of self-assembled ultra thin organic film.

• 한국세라믹학회지
• /
• 제30권11호
• /
• pp.967-973
• /
• 1993

The effect on the hydration of cement was that Cu and Pb reacted with alkali to form soluble hydrates at theinitial stage and then there followed a slow reaction forming insoluble metal hydroxides. These hydroxides were deposited on the surface of cement particles providing a barrier against further hydration. But as a slow reaction continued, the insoluble layers were eventually destroyed and the hydration reaction resumed. Thereafter, another retardation occured by restricting the polymerization of silicates, shown by FT-IR spectroscopy analysis. In the case of Cr, as its reaction with cement caused H2O, the coordinator of Cr complex, to replace or polymerize with OH-, the formation of Cr complex promoted the leakage of OH- and increased the heat of dissolution. So the total heat evolution during hydration was larger than that in the case of Pb or Cu. The retarding effect of heavy metal ions was in the order Pb>Cu>Cr.

• 대한화장품학회지
• /
• 제41권2호
• /
• pp.113-119
• /
• 2015

피부의 최외곽층인 각질층에 대한 수분량을 측정하는 것은 피부장벽기능과 생물리학적 특성에 대한 피부 건강함, 유연함, 부드러움 등의 중요한 정보를 제공한다. 그러나, 평가자와 피험자와의 개인적인 차이와 측정환경의 변화에 따라 재현성과 반복성에 있어서 각질층의 수분량을 측정하는 데에는 많은 어려움이 있다. 본 연구의 목적은 피부 각질층에 여러 종류의 제품을 사용 전후에 객관적으로 수분량을 측정하는 데에 있다. 40명의 건강한 자발적 피험자의 하박 내측을 피부의 전기용량 특성을 이용하여 수화정도를 측정하였다. 피부 수분량은 시험제품 도포 후, 3 h, 6 h 뒤에 측정하였다. 무도포 부위의 편차를 보정하기 위해 수분증가율을 이용하였고, 5반복 측정을 통하여 분석하였다. 수분량 측정에 가장 효과를 보이는 대표적 폴리올 종류인 글리세롤과 부틸렌 글라이콜을 이용하여 연구를 수행하였다. 대부분의 폴리올 종류는 피부 수분량 변화에 영향을 미치기 때문에 연구에 참여한 피험자에게 0 ~ 20%의 글리세롤을 표준제품으로 사용하여 보정하였다. 피부 수분량은 낮은 농도의 글리세롤 범위에서 직선의 상관관계를 갖기 때문에, 글리세롤의 농도에 따라 피부 수분량에 대한 피험자 각각의 표준화된 곡선을 얻었다. 이렇게 얻어진 피부 수분량에 대응하는 글리세롤 농도 값은 통계학적으로 재현성과 반복성을 보였다. 게다가 이렇게 얻어진 표준화 곡선은 피험자 개인의 피부특성으로 활용할 수 있었다. 이러한 연구 결과는 화장품과 같은 피부외용제품에 대한 미세한 피부 상태의 변화와 외부환경 변화에도 불구하고, 같은 결과를 보였다. 향후 이러한 결과를 토대로, 계면활성제와 지질, 수용성 물질에 대한 제품 원료에 대한 피부 측정에 필요한 비침습적 방법과 병행해서 사용할 수 있을 것으로 사료된다.

• 한국세라믹학회지
• /
• 제52권1호
• /
• pp.28-32
• /
• 2015

In this article, the influence of a hydrolyzed wheat protein retarder on the hydration process, ion concentration in liquid phase, degree of supersaturation, and crystal morphology of plaster was investigated. Furthermore, the retarding mechanism and the strength loss of gypsum were also studied by scanning electron microscopy (SEM). The results indicate that the use of the hydrolyzed wheat protein retarder for plaster achieved a better retarding effect and lower strength loss. The combination of gypsum plaster with the retarder not only decreased the plaster's early hydration rate and prolonged its setting time efficiently, but also militated against the crystal morphology of dihydrate gypsum. For example, the crystal dimensions changed little, but the proportion of needle-shaped crystals decreased. Combination with calcium ions on the surface of dihydrate gypsum crystal nuclei may form a chemisorbed layer, reduce the surface energy of the crystal nuclei, and inhibit the growth of the crystal nuclei of dihydrate gypsum. Consequently, the hydration process of building gypsum becomes greatly extended and is slowed down significantly.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.628-631
• /
• 2002

$Al_2O_3$ capping layer and MgO protective layer were deposited by electron beam evaporation method using single crystal source. Thickness of the capping layer, $Al_2O_3$, was varied from 5 nm to 10 nm. Surface morphology was observed by SEM and AFM before and after hydration. And microstructure of deposited $Al_2O_3$ layer and chemical shift of electron binding energy were also observed by high resolution TEM and XPS, respectively, after hydration. From these results, it was found that Mg atoms diffused into $Al_2O_3$ layer, reacted with moisture and formed $Mg(OH)_2$ during hydration. As thickness of $Al_2O_3$ increased, extent of hydration increased. $Al_2O_3$ capped MgO thin films and uncapped MgO thin films were deposited on AC-PDP test panel to characterize discharge properties. Although $Al_2O_3$ has poor discharge properties rather than MgO, because of many hydrated species on the surface of MgO, similar discharge properties were observed.

• 한국건설순환자원학회논문집
• /
• 제8권1호
• /
• pp.81-87
• /
• 2020

본 연구에서는 자기치유 콘크리트의 배합에 따른 수화과정을 해석하였다. 시뮬레이션을 위해 열역학적 모델 GEMS를 사용하였으며, 시멘트 수화모델로 Parrot & Killoh의 경험적 모델을 미소수화열시험의 결과와의 비교분석을 통해 타당성을 검증하였고, 본 연구에서 바인더로 치환하여 사용하는 클링커의 수화모델을 제시하여 사용하였다. 클링커를 0%, 10%, 20%, 30%로 치환한 배합에 따른 시뮬레이션 결과로 클링커를 사용한 배합이 균열시점에서 자기치유물질 생성량이 대폭 증가하는 것으로 확인되었다. 그러나 치환율이 증가함에 따라 CSHQ와 Portlandite의 생성량이 감소해 콘크리트의 기본적 특성인 강도와 내구성에 영향을 주는 것으로 판단되며, 본 논문에서 고려한 자기치유 콘크리트 배합중 클링커를 10%를 치환한 SHP-10배합이 가장 효율적인 재료인 것으로 판단된다.

• Applied Biological Chemistry
• /
• 제28권2호
• /
• pp.62-67
• /
• 1985

일반계(35 품종) 및 다수계(24 품종) 쌀의 수분 흡수 속도에 미치는 인자에 대하여 조사하였다. 각 품종마다 독특한 수분 흡수 속도를 보였으나, 대체로 다수계 품종이 일반계 품종에 비하여 수분 흡수 속도가 빨랐다. 쌀의 수분 흡수 속도는 단백질, 아밀로스, 쌀알의 표면적 및 부피와 상관 관계를 보이지 않았으나, 쌀알의 길이와 폭의 비와는 부의 상관을 보였다.