• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.852-855
• /
• 2002

In order to investigate the fracture behaviors(penetration modes) and resistance to penetration during ballistic impact of surface hardening treated Aluminum, Titanium alloy laminates, ballistic tests were conducted. In this paper, Anodized Al 5083-H131 alloy laminates and nitrified Ti (Gr.2) alloy laminates were used to achieve higher surface hardness. Surface hardness test were conducted using a Micro victor's hardness tester and thickness of surface hardening treated specimens was measured by video microscope. Resistance to penetration is determined by the protection ballistic limit($V_50$), a statistical velocity with 50% probability far complete penetration. Fracture behaviors and ballistic tolerance, described by penetration modes, are respectfully observed at and above ballistic limit velocities, as a result of $V_50$ test and Projectile Through Plates (PTP) test methods. PTP tests were conducted with $0^{\circ}$ obliquity at room temperature using 5.56mm ball projectile. $V_50$ tests with $0^{\circ}$ obliquity at room temperature were conducted with projectiles that were able to achieve near or complete penetration during PTP tests.

• 한국레이저가공학회지
• /
• 제18권2호
• /
• pp.1-4
• /
• 2015

This study is related to the surface hardening treatment to spheroidal graphite cast iron for die by using high power diode laser. Laser device used in this experiment is capable of real-time laser power control. This is because the infrared temperature sensor (two color pyrometer) attached to the optical system measures the surface temperature of specimen and adjusts the laser power in real time. The surface treatment was carried out with the change of heat treatment temperature at the beam travel speed 3 mm/sec. Hardened width and depth was measured and hardened zone was analyzed by micro vickers hardness test in order to research the optimum condition of heat treatment. The changes in microstructure of the hardened zone also was examined. As a result of hardness measurement and observations on microstructure of hardened zone, hardness increased over three times as compared with base metal because the martensite was formed on the matrix structure.

• 대한기계학회논문집A
• /
• 제35권12호
• /
• pp.1663-1668
• /
• 2011

자동차 차체를 제작하는 프레스 금형의 가공공정 중 제품의 형태를 완성하는 드로잉 공정 및 불필요한 부분을 절단하는 트리밍 공정은 그 공정의 특성상 금형의 마모가 심하기 때문에 금형의 내마모성을 향상시키기 위한 표면경화처리가 요구되고 있다. 따라서 본 연구에서는 프레스 금형에 레이저 표면처리기술을 적용하기 위한 실험을 실시하였다. 드로잉 공정 및 트리밍 공정에 적합한 표면경화처리를 위해 다이오드 레이저를 이용하여 시험편의 평면부 및 모서리부를 열처리하였으며, 각각의 적정 열처리 조건을 도출하였다. 또한 시험편의 재료에 따른 열처리 특성을 비교하기 위해 구상흑연 및 편상흑연 주철을 사용하여 실험을 진행하였다. 실험 결과, 재료에 따른 열처리 특성에 차이가 있다는 것을 확인하였으며, 적정 열처리된 조건에서의 경화부는 모재에 비하여 약 3배 정도의 경도상승을 나타내었다.

• 한국재료학회지
• /
• 제9권11호
• /
• pp.1102-1107
• /
• 1999

FeAl 기지 복합재료는 hot-pressing에 의해서 성공적으로 제조할 수 있다. 이러한 FeAl 합금의 기계적 특성에 대한 연구는 많이 진행되었으나 플라즈마 질화에 의한 표면 경화특성에 관한 연구는 아직 미흡한 실정이다. 본 연구에서는 hot-pressing으로 제조된 소결 복합재료의 미세구조와 플라즈마 질화처리시 표면경화의 관계를 분석하였다. FeAl을 기지로 하는 합금은 플라즈마 질화처리에 의해서 표면경도가 상승하는 경향을 보였고, 이러한 경향은 질화처리 시간이 증가할수록 더욱 뚜렷하였다($\textrm{H}_{\textrm{v}}$ 100gf, 확산층 : 1100~1450kg/$\textrm{mm}^2$, matrix : 330~360kg/$\textrm{mm}^2$). FeAl 합금으로 플라즈마 질화처리에 의해서 매우 우수한 표면경화특성을 얻을 수 있었다. 확산층은 플라즈마 질화처리시간이 증가할수록 두꺼워졌으며, SiC(sub)p의 함유량이 증가함에 따라 확산층은 감소하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2005년도 창립60주년 기념 추계 학술대회
• /
• pp.222.2-222.2
• /
• 2005

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.676-679
• /
• 1995

Practically, induction surface hardening is used widely to enhance the local strength of structure. In this study, Fatigue limit and its S-T characteristic for raw and induction hardened specimen of SCM440 is studied experimentally. The life prediction was considered by Juvinall's equation and its predicted result is compared with experiment.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.987-988
• /
• 2006

The processes of P/M affect the properties of sintered gears. The different techniques of P/M lead to the different properties of sintered gears. This paper summarizes new progress in powder metallurgy for sintered gears. These progresses include warm compaction, high velocity compaction, sinter hardening, high temperature sintering, infiltration, CNC powder press and surface densification etc.

• 한국생산제조학회지
• /
• 제9권2호
• /
• pp.66-71
• /
• 2000

Laser induced surface hardening of Tool steel(STC5) can be achieved either with or without surface melting. In trans-formation hardening as the surface is heated to a temperature below its melting point and is rapidly cooled solidified microstructures are usually much finer and stronger than those of the base matals. For this reason surface modification of tool steel by YAG laser irradiation has been studied as a function of processing parameters such as power density pulse width defocusing distance and molten depth. The high energy density changes and refines the microstructure of the near surface layer. In the case of beam passes martensite formed in the melt zone exhibited very high vickers hardness values. Molten depth and width depend on defocusing distance and energy of black color painting is more absorptive than other color painting.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2012년도 추계총회 및 학술대회 논문집
• /
• pp.58-59
• /
• 2012

Surface hardening mechanism of H13 steel was investigated when ion niriding after shot peening process was applied. Severe plastic deformation induced nanocrystallized grains at surface region. Higher nitrogen concentration was achieved in ion nitrided specimen with shot peening treatment than in single nitrided specimen. The elemental mapping on chromium and nitrogen by TEM-EELs showed chromium dissolved in matrix enhanced bulk nitrogen diffusion at surface region. Higher nitrogen diffusion also caused lattice distortion. Nano-sized grains, higher nitrogen concentration, and lattice diffustion contributed to the surface hardening.

• 한국농공학회지
• /
• 제41권3호
• /
• pp.91-100
• /
• 1999

Tow constitutive models for weathered granite soil, Yasufuku's constitutive model with a single yield surface and Lade's constitutive model with two intersectiong yield surface compared in terms of their capabilities to accurately capture the observed behavior of compacted weathered grainite soil for various stress-paths. Both the single surface and the double surface models capture the experimentally observed behavior at a variety of stress-paths with good accuracy. The double surface model may model the observed compacted weathered granite soil behavior with better accuracy for proportational loading with increasing stress, but the single surface model may model dilatancy property with better accuracy for p-constant loading with increasing stress ratio.