• 한국세라믹학회지
• /
• 제48권2호
• /
• pp.121-126
• /
• 2011

The study investigates the effects of a body that influences the nucleation and growth of crystal by experiment the application of zinc crystalline glaze to five of the most favorably used kinds of bodies sold in the market. As a result, in all bodies used in the test, willemite crystal is appeared on the surface and in the case of white porcelain, super white and white porcelain sculpture clay, beautiful crystals is developed. The reason that crystal does not grow and trickle down by sticking to the body in celadon clay and Sanchung clay is the large surface tension of glaze by ingredient CaO which is more often present compared to other bodies. In glaze, the ingredients $Al_2O_3$ and RO greatly influences the surface tension, and adhesion of the glaze and the body is completed by the glaze's power to stick, which is determined by the reaction of both the glaze and the body. However, in the case of Sanchung clay, the CaO in body reacts to the glaze, and glaze, on Sanchung clay, has tendency to run more compared with other bodies. It is supposed that this mechanism influences the growth of willemite crystal and the glaze's adhesion to the body.

• 대한치과보철학회지
• /
• 제29권3호
• /
• pp.87-99
• /
• 1991

The effect of oven firing on the color stability and surface texture of extrinsic stains used characterization and color modification of metal cermic restoration were studied by comparing different temperatures and techniques. They were autoglaze technique, applied glaze technique, two step low-fusing glaze technique and one step low-fusing glaze technique. Autoglaze technique and applied glaze technique were air-fired to manufacturer's recommended temperature. Two step low-fusing glaze technique is separated staining and overglazing. Thin slurry of stain powder were air-fired to $1500^{\circ}F$, Overglaze powder powder was then mixed with seam medium and air-fired to $170^{\circ}F$. One step low-fusing glaze technique is combined staining and overglazing. Thin slurry of stain and glaze powder were air-fired to $170^{\circ}F$. The obtained results were as fellows. 1. Slightly significant color differences by colorimeter were found between different stain application and fusion techniques(P<0.05). 2. Two step low-fusing glaze method showed the most rough surface, especially ceramco orage stain(P<0.05). 3. Surface roughness increased gradually in order of autoglaze, applied glaze, one step low-fusing glaze but they were not significantly different(P<0.05). 4. When two step low-fusing glaze was applied, both color measurement and surface texture were sinificantly different from other groups(P<0.05).

• 대한치과기공학회지
• /
• 제44권4호
• /
• pp.111-117
• /
• 2022

Purpose: This study was conducted to compare the Vickers hardness on the denture acrylic resins using the glaze color system. Methods: The specimens (20×2 mm) were prepared by mixing according to the manufacturer's protocols through thermal polymerization and self-polymerization. The surface roughness was measured using a testing machine after water-soaking for 48 hours. For the Vickers hardness measurement, the completed specimen was soaked in water for 48 hours and then applied at 200 gf for 30 seconds. Was the specimen immersed after being soaked in water for 48 hours at temperatures of 5℃ and 55℃, respectively, for 30 seconds for the thermos-cycling treatment, and it was carried out 5,000 times. Results: Surface roughness was higher in the more glazing group than in the control group. A significant difference was observed in all groups, except for the Retec Don 2000 and Luciton 199 groups (p<0.05). As a result of measuring the Vickers hardness, the treatment by glaze color showed slightly lower but the thermo-cycling treatment group appeared higher than control group in all. Conclusion: Therefore, the glaze color was found to affect the surface roughness and showed a significant difference. The surface glaze color showed a very high Vickers hardness after the thermo-cycling treatment, indicating that the surface-strengthening effect is greater in the oral environment.

• 보존과학회지
• /
• 제35권1호
• /
• pp.33-40
• /
• 2019

During the conservation and maintenance of the birthplace center yard of President Asan Yoon Bosun, four porcelain enamel dishware were excavated from the central yard well. The glaze layer of excavated enamel was severely damaged; hence, the conservation process was done rapidly. In addition, scientific investigation and analysis were conducted to confirm the material properties of the glaze layer. It was confirmed that the outer surface was inverted and dried, while the inner surface was upright and fired during the glazing and drying process by measuring the film thickness. By examining the breakup phenomenon, the breaking up of the white enamel on the colored enamel was confirmed. This indicates that the colored glaze rose to the surface depending on the density of the colored glaze and white glaze. The investigation of the cross-section of the film confirmed that the lower layer formed according to the bonding properties with metal during the glazing process. Analysis of the constituents of the identified lower layer confirmed that there are differences between the specific components of the metal oxide of the lower layer and the surface color development of the upper layer.

• 한국결정성장학회지
• /
• 제28권6호
• /
• pp.243-249
• /
• 2018

$1000^{\circ}C$ 이상의 고온 열처리를 통하여 제작되는 도자타일은 우수한 내구성과 표면 유약의 심미성 때문에 건축용 내외장재로 많이 사용되고 있다. 최근 건축용 도자타일 공정에 양산형 잉크젯 프린팅이 빠르게 도입되고 있으며, 이와 관련한 소재(세라믹 잉크, 세라믹 안료, 유약)에 대한 연구가 활발하게 이루어지고 있다. 본 연구에서는 도자타일의 표면 유약의 원료인 고령토(kaolin)를 고에너지 밀링을 이용하여 미립화하였고, 이에 따른 표면 유약의 미세구조 변화가 세라믹 잉크의 인쇄적성에 미치는 영향에 대해 확인하였다. 세라믹 잉크는 자체 제작한 검은색 잉크를 사용하여 도자타일의 표면 유약에 잉크젯 프린팅하였다. 프린팅된 세라믹 잉크 망점의 크기, 진원도를 측정하여 표면 유약의 고령토 미립화에 따른 인쇄적성을 평가하였다. 또한 고령토 미립화에 따른 표면 유약의 거칠기와 내부 미세 기공 분포를 측정하여 표면 유약의 미세구조 변화와 세라믹 잉크의 인쇄적성의 관계에 대해서도 고찰하였다.

• 한국결정성장학회지
• /
• 제29권5호
• /
• pp.215-221
• /
• 2019

건축용 내외장재로 사용되는 도자타일은 최근에 오염 방지 기능에 대한 시장의 수요에 따라, $TiO_2$ 코팅을 통한 친수성(hydrophilic property) 표면개발 연구와 더불어 표면에서 물방울의 흐름성을 향상시켜 오염물질을 제거하는 소수성(hydrophobic property) 표면을 갖는 도자타일에 대한 연구가 진행되고 있다. 특히 추가적인 코팅 공정 적용 없이 $1000^{\circ}C$ 이상의 소결 과정을 통해서 소수성을 갖으며, 기존 도자타일의 기계적 물성의 저하가 나타나지 않는 표면유약의 개발이 매우 중요하다. 본 연구에서는 상용화 도자타일의 표면유약에 조성에 구리 분말을 첨가하여 기존 소결 공정을 적용하고, 추가 코팅 공정 없이 소수성 도자타일을 제작하고 표면유약의 두께에 따른 접촉각 특성 변화를 관찰하였다. 구리 분말이 첨가되지 않은 도자타일의 표면 접촉각은 $25^{\circ}$로 친수성을 보이는 반면에 구리 분말이 첨가된 표면유약이 $150{\mu}m$ 두께인 경우에 접촉각이 $109^{\circ}$까지 증가하는 것을 확인하였다. 이와 같은 구리 분말이 첨가된 표면유약의 우수한 소수성 발현은 유약 표면에서 구리 입자의 세포 구조(cellular structure) 분포에 의한 것으로 확인되었다. 또한 개발된 소수성 도자타일의 기계적 물성(꺽임강도, 내화학성, 내마모성, 내동해성)은 기존 도자타일과 거의 동일하고 'KS L 1001 도자타일'의 기준을 만족하는 결과를 얻을 수 있었다.

• 한국세라믹학회지
• /
• 제53권5호
• /
• pp.535-540
• /
• 2016

Effects of compositions and sintering conditions on glaze properties are shown in the diagram constructed by using the unity molecular formula (UMF) method in this study. Glossy characteristics of glaze were clearly differentiated by compositional area in the diagram and sintering process. As alumina and silica contents were increased, texture of the glaze became rough and opaque, akin to having been devitrified or underfired. The correlation between glossiness and surface roughness was found to be non-linear and inversely proportionate. Crystalline phases formed in the glaze were also influenced by the compositional area. Due to the high concentration of CaO, anorthite and wollastonite were formed depending on the compositions. Hardness was increased with an increase of alumina and silica concentrations in the glaze.

• 한국세라믹학회지
• /
• 제50권6호
• /
• pp.518-522
• /
• 2013

This study investigatesthe coloration mechanism by identifying the factor that affects thered coloration of copper red glazesin traditional Korean ceramics. The characteristics of the reduction-fired copper red glaze's sections are analyzed using an optical microscope, Raman spectroscopy, scanning electron microscopy (SEM) and energy dispersive x-ray spectroscopy (EDX). The sections observed using an optical microscope are divided into domains of surface, red-bubble, and red band. According to the Raman micro spectroscopy analysis results, the major characteristic peak is identified as silicate in all three domains, and the intensity of $Cu_2O$ increases toward the red band. In addition, it is confirmed that the most abundant CuO exists in the glaze bubbles. Moreover, CuO and $Cu_2O$ exist as fine particles in a dispersed state in the surface domain. Thus, Cu combined with oxygen is distributed evenly throughout the copper red glaze, and $Cu_2O$ is more concentrated toward the interface between body and glaze. It is also confirmed that CuO is concentrated around the bubbles. Therefore, it is concluded that the red coloration of the copper red glaze is revealed not only through metallic Cu but also through $Cu_2O$ and CuO.

• The Journal of Advanced Prosthodontics
• /
• 제8권4호
• /
• pp.267-274
• /
• 2016

PURPOSE. This study aimed to evaluate the effect of surface treatments on bond strength of indirect composite material (Tescera Indirect Composite System) to monolithic zirconia (inCoris TZI). MATERIALS AND METHODS. Partially stabilized monolithic zirconia blocks were cut into with 2.0 mm thickness. Sintered zirconia specimens were divided into different surface treatment groups: no treatment (control), sandblasting, glaze layer & hydrofluoric acid application, and sandblasting + glaze layer & hydrofluoric acid application. The indirect composite material was applied to the surface of the monolithic zirconia specimens. Shear bond strength value of each specimen was evaluated after thermocycling. The fractured surface of each specimen was examined with a stereomicroscope and a scanning electron microscope to assess the failure types. The data were analyzed using one-way analysis of variance (ANOVA) and Tukey LSD tests (${\alpha}$=.05). RESULTS. Bond strength was significantly lower in untreated specimens than in sandblasted specimens (P<.05). No difference between the glaze layer and hydrofluoric acid application treated groups were observed. However, bond strength for these groups were significantly higher as compared with the other two groups (P<.05). CONCLUSION. Combined use of glaze layer & hydrofluoric acid application and silanization are reliable for strong and durable bonding between indirect composite material and monolithic zirconia.

• 박물관보존과학
• /
• 제29권
• /
• pp.65-80
• /
• 2023

본 연구는 통일신라 하대 전돌 유약의 재료학적 특성을 파악하기 위하여 포항 법광사지 출토 납유 전돌 7점을 조사하였다. 유약의 표면과 단면을 현미경으로 관찰하여 다양한 수화양상을 확인하고 이를 표면층·수화층A·수화층B·녹색층으로 분류하였다. 이들 각 층의 화학조성을 주사전자현미분석으로 측정한 결과, 수화의 영향이 가장 적은 녹색층이 원 조성으로 추정된다. 이 녹색층은 주성분이 PbO와 SiO₂가 8 : 2의 비율로 나타나고 주요 발색원소인 CuO를 약 2% 내외로 함유한 저화도 유약이다. 녹색층은 경상도 납유 전돌의 기 분석된 주성분 자료들과 비교 검토하여 법광사지 납유 조성이 사천왕사지, 천룡사지, 부석사지 바닥전과 유사함을 밝혀냈다.