• 한국정밀공학회지
• /
• 제21권8호
• /
• pp.65-72
• /
• 2004

For the burrs formed in machining are irregular and very sharp in shape, it is usually very difficult to measure burr accurately. It was proved that micro burr geometry can be measured imprecision by the Conoprobe sensor using conoscopic holography method. We developed 3D burr measurement system using this sensor. The system is composed of Conoprobe sensor, XY table, controller and 3D measurement program. Some measurements using the developed system are conducted for the burrs formed in micro drilling and piercing. Specific software fur burr measurement includes several function, calculation of burr volume, average burr height. Burs formed on a curved surface were compensated and measured successfully using the basic surface compensation function.

• 로봇학회논문지
• /
• 제8권3호
• /
• pp.179-185
• /
• 2013

In this paper we propose a haptic interaction system that physically represents the underlying geometry of objects displayed in a 2D picture, i.e., a digital image. To obtain the object's geometry displayed in the picture, we estimate the physical transformation between the object plane and the image plane based on homographic information. We then calculate the rotated surface normal vector of the object's face and place it on the corresponding part in the 2D image. The purpose of this setup is to create a force that can be rendered along with the image without distorting the visual information. We evaluated the proposed haptic rendering system using a set of pictures of objects with different orientations. The experimental results show that the participants reliably identified the geometric configuration by touching the object in the picture. We conclude this paper with a set of applications.

• 전자공학회논문지D
• /
• 제34D권10호
• /
• pp.45-52
• /
• 1997

An analysis method for the electromagnetic scattering of a gaussian beam wave by finite periodic conducting strip grating on a groudned dielectric slab is considered. The intergral equation for the unknown current induced on the conducting strip surface is derived and solbed numerically by use of the method of moment. From knowledge of the strip current, the quantities of interest such as radiation pattern, the space wave power radiated into the free space, and the coupled surface wave power propagating along the dielectric slab are computed for the appropriately chosen parametes Some similarity between scattering behaviours of the present geometry and the infinite geometry is examined by observing the Off-bragg as well as bragg blaxing penomena in both geometries.The validity of the numerical results are assured by a check of the power conservation relations.

• 산업기술연구
• /
• 제5권
• /
• pp.51-57
• /
• 1985

The object of this study is in the development of the computer program to predict the performance of rotor in hovering by getting the aerodynamic load acting on blade. For this work the vortex theory was chosen among the aerodynamic theories, blade was replaced by planar vortex panels, and prescribed wake for the wake geometry was selected and then represented by vortex lattices. To get the aerodynamic load on blade, flow was assumed to be incompressible, irrotational and steady, and the surface boundary condition of inviscid flow was used as boundary condition. Then the relationships between this load and flight condition and blade geometry were examined.

• 한국산업융합학회 논문집
• /
• 제4권4호
• /
• pp.365-369
• /
• 2001

This paper presented a new model of virtualized CNC milling machine. The model verifies the over cut, the under cut and the surface roughness using NC file generated from CAM and cutting condition. The model uses Z-map model to verify workpiece. In this paper, the model used the velocities of x, y and z direction and obtained a center point of a hall end mill for modeling Z-map of workpiece. To investigate the performance of the model, simulation study was carried out. As the results, the model gave geometry accuracy of workpiece, the surface roughness and the chip loads in finish cutting that can predict tool chipping. The virtualized CNC machine can he used a flat end mill, a ball end mill and a rounded end mill.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 춘계학술대회 논문집
• /
• pp.753-756
• /
• 2000

The accumulated know-how and trial-and-error procedures are known as the best ways to determine blank shape and dimensions. One of the most important steps to determine the blank shape and dimensions in deep drawing process is to calculate the surface area of the product. In general, the surface area of products is calculated by mathematical or 3-D modeling methods. A blank design system is constructed for elliptical deep drawing products to recognize the geometry of the product in the long side and short side by drafting in another two layers on AutoCAD software. This system consists of input geometry recognition module, 3-D modeling module and blank design module, respectively. Blank dimension of three types is determined by the same area, which was acquired in 3-D modeling module. The suitability of this system is verified by applying to a real deep drawing product.

• 한국공작기계학회논문집
• /
• 제10권5호
• /
• pp.25-30
• /
• 2001

The purpose of this investigation is experimentally to clarify the machinability and optimum tool geometry on milling of hardened STD11 steel. In the finish process office milling of high hardened STD11 steel by CBN tool, the optimum tool shape is suggested, which can minimize the tool fracture and chipping by impact. It is measured that cutting farce, tool wear and surface roughness generated during single-insert face milling using various geometric CBN tools. It has been found that the optimal chamfer angle of CBN tool is about -$25^{\circ}C$ and the suitable chandler width is 0.2mm. The nose radius of tool is the most excellent at 1.2mm in the viewpoint of tool wear and surface roughness.

• 한국표면공학회지
• /
• 제28권3호
• /
• pp.164-173
• /
• 1995

Based on the potential-theory model for secondary current distribution, we could predict the thickness distributions of electroplating on patterned substrates with the different size of the auxiliary electrode. The substrates contain lithographic patterns at each sample geometry. Each sample geometry had different current distribution at the same condition except the size of the auxiliary electrodes. The size effect of the auxiliary electrode on thickness distribution of electrodeposition on patterned electrode was investigated in a series of experiments. Copper was galvanostatically deposited from an acid-sulfate solution in a reciprocating paddle cell. The thickness distributions of the workpiece scale measured by profilometry across the specimen were in good agreement with the current distribution predicted by boundary element method.

• 한국지능시스템학회논문지
• /
• 제12권3호
• /
• pp.255-260
• /
• 2002

This paper describes a fuzzy-based system for analyzing the stress intensity factors (SIFs) of three-dimensional (3D) cracks. A geometry model, i.e. a solid containing one or several 3D cracks is defined. Several distributions of local node density are chosen, and then automatically superposed on one another over the geometry model by using the fuzzy knowledge processing. Nodes are generated by the bucketing method, and ten-coded quadratic tetrahedral solid elements are generated by the Delaunay triangulation techniques. The singular elements such that the mid-point nodes near crack front are shifted at the quarter-points, and these are automatically placed along the 3D crack front. The complete finite element(FE) model is generated, and a stress analysis is performed. The SIFs are calculated using the displacement extrapolation method. To demonstrate practical performances of the present system, semi-elliptical surface cracks in a inhomogeneous plate subjected to uniform tension are solved.

• Structural Engineering and Mechanics
• /
• 제76권6호
• /
• pp.725-736
• /
• 2020

In this work the mixed mode I/III fracture of sandstone has been studied experimentally and numerically. The experimental work used three-point bending specimens containing pre-existing cracks, machined at various inclination angles so as to achieve varying proportions of mode I to mode III loading. Dimensionless stress intensity factors were calculated using the extended finite element method (XFEM) for and compared with existing results from literature calculated using conventional finite element method. A total of 28 samples were used to conduct the fracture test with 4 specimens for each of 7 different inclination angles. The fracture load and the geometry of the fracture surface were obtained for different mode mixities. Prediction of the fracture loads and the geometry of the fracture surface were made using XFEM coupled with a cohesive zone model (CZM) and showed a good comparison with the experimental results.