• Journal of Fashion Business
• /
• v.7 no.4
• /
• pp.121-128
• /
• 2003

A new textile material, poly(trimethylene terephthalate) polymer, has been introduced to the textile industry. The structure of PTT is similar to the PET, while the tensile deformation and subsequent recovery property is better than that of PET. In this study, the physical and mechanical properties of textile woven fabrics made of PTT, PET, and nylon 6 yarns as the filling yarn were determined using the Kawabata Evaluation System (KES), including tensile, bending, shearing, compression, and surface related parameters. On top of these measurements, the subjective ratings by evaluators were performed on the fabric samples. From the examination of the stress-strain behavior of the yarn specimens focused on the recovery mode, it was evident that the PTT specimen developed lower stress at 3% elongation. The subsequent recovery curve showed that the PTT has less stress-decay rate than the other specimens, implying that the recovery behavior of the PTT is recommendable for the end-uses including stretchable textile materials, sports wears, etc. The KES bending rigidity(B) value of the PTT sample fabric was lower than that of the PET sample fabric. Subjective evaluation of the fabric samples by the evaluators on the descriptive word pair "soft - not soft" showed similar tendency with the KES B determination of the fabric samples.

• Korean Journal of Veterinary Research
• /
• v.34 no.2
• /
• pp.321-326
• /
• 1994

Korean isolate, porcine epidemic diarrhea virus (KPEDV-9) was adapted through serial passages in vero cell. The viral yield reached up to $10^{5-6}$ $TCID_{50}/ml$ at the passage level of 90th. The cell adapted virus was characterized through genetic and morphological examinations. The RNA extracted from virus infected cell revealed the presence of RNA band with molecular size of >20Kb. The electron microscopic examination on purified virus showed the pleomorphic appearance of enveloped particles with 5-10nm surface projections, which fit with the shape of coronavirus. The etiological survey on swine diarrhea by immunofluorescence test(FA) indicated 17.5% positive rate on the PEDV infection. In addition, the incidence were detected both in piglets within two weeks old as well as fattening pigs. Serological survey by ELISA revealed the overall 45% positive result, thus, indicating the PEDV infection are widespread throughout this country.

• 한국해양학회지
• /
• v.17 no.2
• /
• pp.83-94
• /
• 1982

Specimens of eels, collected in the lagoons of Arcachon Bay from April 1977 to October 1978, were analysed for age and growty. The structure of the otolith was described based on examination of the decalccified surface using an scanning electron microscope, and was compared with obcervations made under an optical microscope. The otolith of Arcachon eels show a narrow summer growth stop in addition to a growth stop formed in winter. The narrow summer growtu in length of sedentsry eels was well represented removal of the large memgers by the migration to the sea decreases the growth ratio of sedentary eels as the fish grows older. This size selective migrationin part contributes to satisfy Von Bertalanffy's assumption. Length distribution of the exceptionally large eels in relation to age was analysed ty comparing them with "normal" sedentary eesl and with silver migsating, and it is suggested that thew exceptionally large eesl consist of the anmals which probably the [apacity for growth wen alredy young.

• Korean Journal of Head & Neck Oncology
• /
• v.19 no.2
• /
• pp.170-174
• /
• 2003

Pleomorphic adenoma is the most common benign tumor in the parotid gland and a parotidectomy with preservation of the facial nerve is a widely accepted treatment. We experienced a case of huge pleomorphic adenoma arising in the parotid gland with suspicious skin invasion. This present case was 67-year-old male presenting huge parotid mass $(12{\times}7cm)$ that has been present for 30 years and this tumor showed rapid-growing nature recently. The overlying skin surface was ulcerated with serous discharge and tightly adherent to the mass. The risk of malignant transformation of a pleomorphic adenoma increases with the duration of disease. The preoperative tentative diagnosis was carcinoma ex pleomorphic adenoma in the parotid gland. The initial pathologic diagnosis of fine needle aspiration biopsy was unsatisfactory smear. After parotidectomy, the histologic examination revealed that the parotid tumor was benign pleomorphic adenoma. We present a case of huge pleomorphic adenoma with skin invasion in the parotid gland with review of literatures.

• Journal of Navigation and Port Research
• /
• v.27 no.5
• /
• pp.465-471
• /
• 2003

A coastwise chemical tanker sailing at full speed has capsized during turning in calm water. In the previous paper, we investigated the reasons of the accident by demonstrating the proper correction for the free surface effect of the liquid cargo and the bow-sinkage effect. In this paper, we also carry out model experiments of a transverse pressure under the seawater and an outward heel moment according to the heel angle and rudder angle, on the basis of radius of turning circle, ship's speed and drift angle of model ship occurring in turning. It is also shown that the flooding of seawater onto the deck occurring in turning generated a significant outward heel moment and increased the vertical distance between the center of gravity of the ship and the center of lateral water drag.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.20 no.1
• /
• pp.23-29
• /
• 1984

Nowdays, the high strength aluminum alloys are broadly used for structural purpose, but the practical strengthening method by aging treatment are not much available. So that, in this study, in order to investigate the effect of aging treatment for strengthening on the fracture characteristics of the domestic high strength Al alloy (A2024BE), the variations of the aging temperature and time were taken after solution treatment. By microstructural examination, and by SEM fractographs of the fractures, the effects of aging temperature and time were investigated, considering on the fracture behaviour. The results obtained are as follows: 1) It was confirmed by microstructural investigation that the aging temperature of $190^{\circ}C$ and the aging time of 12hours were optimal to get more sound microstructure with distribution of uniform precipitation. 2) By step aging treatment, the proper aging time for obtaining the similar microstructure without any microstructural defects could be shortened in half the normal aging time. 3)By examining the SEM fractographs of the fracture surface, it was found that, regardless of the aging treatment time and temperature, all were intergranular ductile fractures, but the aging treatment at $190^{\circ}C$ for 12 hours resulted in dimple-type-transgranular and intergranular-ductile-frature.

• Korean Journal of Acupuncture
• /
• v.19 no.2
• /
• pp.13-33
• /
• 2002

This study was examined for effects of acupuncture of Zusanli (ST36) on the facial thermography in health subjects. The volunteers who participating in this study had taken rest for 20 - 30 mins in room temperature (23-$25^{\circ}C$) before the examination and informed them what to prohibit smoking, drinking and administration of drug for the previous day. The thermography of face was taken using Infra-Red Imaging System (IR 2000, MEDI-CORE Co., Korea) by time interval of 15 minutes at 15 min before, just before and 15 min after, 30 min after and 45 min after acupuncture stimulation. Acupuncture was applied to the left ST36 for 30 mins. The results showed that acupuncture of ST36 significantly decreased the temperature of all the areas of facial surface comparing to those of control group. Also, it was observed that the quantities of thermal changes following acupuncture of ST36 been increased significantly at the A1, A4, A6, A7 and A9 ROIs (region of interest) comparing that of control group. Observed the thermography classified by ROI, it was clear the fact that acupuncture of ST36 could modulate the specific areas concerning to the facial pathway of Stomach Meridian, because the thermal responses following acupuncture of ST36 were specific at the A1, A2, A5 and A9 ROIs, relatively. These results suggest that acupuncture of ST36 may modulate thermal distributions and changes of facial areas concerned with Stomach Meridian.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.44 no.1
• /
• pp.18-24
• /
• 2018

Objectives: Foreign bodies (FBs) account for 3.8% of all pathologies of the head and neck region, and approximately one third of them are missed on initial examination. Thus, FBs represent diagnostic challenges to maxillofacial surgeons, rendering it necessary to employ an appropriate imaging modality in suspected cases. Materials and Methods: In this cross-sectional study, five different materials, including wood, metal, glass, tooth and stone, were prepared in three sizes (0.5, 1, and 2 mm) and placed in three locations (soft tissue, air-filled space and bone surface) within a sheep's head (one day after death) and scanned by panoramic radiography, cone-beam computed tomography (CBCT), and ultrasonography (US) devices. The images were reviewed, and accuracy of the detection modalities was recorded. The data were analyzed statistically using the Kruskal-Wallis, Mann-Whitney U-test, Friedman, Wilcoxon signed-rank and kappa tests (P<0.05). Results: CBCT was more accurate in detection of FBs than panoramic radiography and US (P<0.001). Metal was the most visible FB in all of modalities. US was the most accurate technique for detecting wooden materials, and CBCT was the best modality for detecting all other materials, regardless of size or location (P<0.05). The detection accuracy of US was greater in soft tissue, while both CBCT and panoramic radiography had minimal accuracy in detection of FBs in soft tissue. Conclusion: CBCT was the most accurate detection modality for all the sizes, locations and compositions of FBs, except for the wooden materials. Therefore, we recommend CBCT as the gold standard of imaging for detecting FBs in the maxillofacial region.

• Journal of Aquaculture
• /
• v.16 no.1
• /
• pp.44-50
• /
• 2003

This study aimed to develop the methods of growing Enteromorpha prolifera natural seedlings in its natural habitat and artificial indoor seedlings by inducing spore release. Likewise, the study examined the possibility of mass production by developing cultivation techniques with cultivating examination. The natural seedling of E.prolifera thrived in a sea area composed of sand and mud, which Is its natural habitat. Growing of this alga on the seedling frame 20 cm high from the bottom at the intertidal zone in summer and 40 cm high in fall was found to be very effective. However, enabling the best attachment rate for artificial indoor seedling requires inducing spore release after drying the mature thalli in a dark place fur about 12∼24 hours and setting seedling nets in a dark water tank (spore solution) for 24 hours. Breeding E.prolifera in a pole-system farm is best done in shallow sea areas with mud or mud and sand geological feature. However, floating-system lam is better for deep-sea areas with fast current. Ideal farming places are sea areas with plenty of nutritional salt and safe places that protect the lam facilities against billows. Furthermore, an exposure method on seawater surface to produce larger output should be used.

• Korean Journal of Materials Research
• /
• v.30 no.9
• /
• pp.453-457
• /
• 2020

Tomb No. 1 (Donghachong) of the Buyeo Neungsan-ri Tomb complex (listed as UNESCO World Heritage Site), is a royal tomb of the Baekje Sabi Period. One wooden coffin unearthed there is an important relic of the funerary culture of the Baekje. This study examines the production techniques of gilt-bronze objects attached to the wooden coffin excavated from Donghachong. The base metal of the gilt-bronze object is pure copper, with single α phase crystals in a heterogeneous form containing annealing twins; Au and Hg are detected in the gilt layer. We suggest that the surface of the forging copperplate is gilded using a mercury amalgam technique; it is thought that the annealing twins of the base material formed during the heat treatment process for the sheet metal. The gilt layer is three to five times thicker for the gilt-bronze objects found near the foot of the coffin than those near the head. We estimate the plating process is carried out at least three times because three layers are identified on the plate near the head. Therefore, it is likely that the materials and methods used to construct the gilt-bronze objects found in different parts of the coffin are the same, but the number of platings is different. This research confirms the metal crafting techniques used in Baekje by the examination of production techniques of these gilt-bronze objects. Further, our paper presents an important example of restoration and reconstruction for a museum exhibition, through effective use of scientific analysis and investigation.