• Bulletin of the Korean Chemical Society
• /
• 제35권5호
• /
• pp.1449-1454
• /
• 2014

The co-sensitization of N719 with a cyclic thiourea functionalized organic dye, coded AZ5, for dye-sensitized solar cells (DSSCs) was demonstrated. Due to its intensive absorption in ultraviolet region, AZ5 could compensate the loss of light harvest induced by triiodide, thereby the short-circuit photocurrent density ($J_{sc}$) was increased for co-sensitized (N719+AZ5) DSSC. Moreover, the electron recombination and dye aggregation were retarded upon N719 cocktail co-sensitized with AZ5, thus the open-circuit voltage ($V_{oc}$) of co-sensitized device was enhanced as well. The increased $J_{sc}$ (17.9 $mA{\cdot}cm^{-2}$) combined with the enhanced $V_{oc}$ (698 mV) ultimately resulted in an improved power conversion efficiency (PCE) of 7.91% for co-sensitized DSSC, which was raised by 8.6% in comparison with that of N719 (PCE = 7.28%) sensitized alone. In addition, co-sensitized DSSC exhibited a better stability than that of N719 sensitized device probably due to the depression of dye desorption.

• 대한족부족관절학회지
• /
• 제16권4호
• /
• pp.247-256
• /
• 2012

Purpose: This study was performed to evaluate the clinical outcomes of operative treatment using mini-open sinus tarsi approach for displaced intraarticular calcaneal fractures. Materials and Methods: We studied 18 cases (16 patients) of intraarticular calcaneal fractures who were treated with sinus tarsi approach by same surgeon. The mean age of patients was 44.8 years, and mean follow-up period was 17.2 months. The measurement of B$\ddot{o}$hler angle, Gissane angle, the degree of articular surface depression, and the period to union were performed through preoperative and postoperative radiographs. The clinical evaluation was performed according to hindfoot score of the American Orthopaedic Foot and Ankle Society (AOFAS) and scale of the Creighton-Nebraska health foundation (CNHF). Results: B$\ddot{o}$hler angle and Gissane angle had improved significantly from preoperative average $9.8^{\circ}$, $117.6^{\circ}$to average $22.4^{\circ}$, $113.4^{\circ}$ immediate postoperatively, and had maintained to average $21.8^{\circ}$and $114.2^{\circ}$ at the last follow-up. The degree of articular surface depression had improved significantly from preoperative average 5.2 mm to 1.2 mm at the last follow-up. All cases achieved bone union, and the period to union was average 10.5 weeks. AOFAS score was average 86.2 points at the last follow-up. There were 7 excellent, 9 good, and 2 fair results according to the CNHF scale. Therefore, 16 cases (88.8%) achieved satisfactory results. Conclusion: The minimally invasive sinus tarsi approach using headless compression screw seems to be an effective surgical method for displaced intraarticular calcaneal fractures, because of the possibility of accurate restoration of articular surface and the low risk of postoperative soft tissue complications.

• Journal of Chest Surgery
• /
• 제11권3호
• /
• pp.246-252
• /
• 1978

A three year and seven month old girl with moderate depression deformity of the sternum associated with a huge well defined homogenous hazy mass density of the upper half of the right hemithorax on plain chest x-ray had developed, exertionaI dyspnea (Figs1, 2 and 3). Correction of the funnel chest was carried out with modified Ravitch procedure and resection of the intrathoracic cystic mass was performed through an anterolateral thoracotomy incision in one stage operation satisfactorily (Figs. 7 and 8). On exploration, the mass, $15{\times}12{\times}10$cm in size, was connected to the bronchus at 1cm a bove the carina by a stalk (Fig. 4). The outer surface showed abundant vasculature. The specimen was filled with mucoid material; the inner surface was much trabeculated. glistening and smooth (Fig. 5 and 6). yficroscopically, the cyst was lined with simple or pseudostratified ciliated columnar epithelium. The cystic wall was composed of loose fibrous connective tissue, muscle layers, cartilages with some lymphocytic infiltration (Fig. 9). Isolated cases of funnel chest deformity and congenital bronchogenic cystic disease are not uncommon; however, the assocbtion of the two conditions is yery rare. Therefore. report and review of the literature was done.

• The Korean Journal of Ecology
• /
• 제25권1호
• /
• pp.45-49
• /
• 2002

Pollen analyses and $^{14}$ C dating of the sediments of the Akindonuma moor, which is situated in a closed depression of an old landslide, were peformed in order to study the vegetation history of the montane zone of the Miyagi Prefecture, Northeast Japan. The main results are as follows: Two forest zones have been distinguished: 1) the A-I zone, or the Fagus-Quercus-Betula forest (R I stage, before about 11,700 yrs B.P.), and 2) the A-II zone, or the Fagus-Quercus forest (R II stage, after about 11,700 yrs B.P.). By comparing the geological section with the pollen diagram of the moor, it is assumed that the deposit environment of the Middle Part, which mostly consists of peat layers, is very stable. During the period, the Ulmus/Zelfkova pollen ratio was very low and small peak was not recognized. According to the preceding research, theme is a close relationship between the fluctuation of the Ulmus/Zelkova pollen ratio and the general trend of hillslope instability in the changing balance of temporature and precipitation Actually, Zelkova serrata tends to cover the footslope and the lower sideslope. Ulmus davidiana covers the footslope and the alluvial cone. Therefore, the fact that the Ulmus/Zeikova pollen ratio was very low and small peak was not recognized, is believed to reflect the stability of the earth's surface environment, which was estimated from the geological section.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 추계학술대회 논문집 - 한국공작기계학회
• /
• pp.179-184
• /
• 1999

When the steel containing Si is oxidated in hi temperature, Re2O3, Red scale is made on the metal side as the spike phase, and this scale invasion into matrix. Therefore, it affects the feature, after rolling. It is reported that the role of Si is FeO/Fe2SiO4 eutectic compound, but Si can not affect pure iron independently. There must be Ni, then the spike phase can exist. Prominence and depression made by Ni that is necessity at the process to work iron. Therefore, in this study after the change of the amount of Ni in pure iron and steel and oxidation, the structure of the oxide and the surface, and the distribution of the elements were considered. In conclusion, at 100$0^{\circ}C$, 110$0^{\circ}C$, 120$0^{\circ}C$ the curves of oxidation weight are all S curves. Especially, in the beginning of oxidation as the amount of Ni increase, the amount of oxidation also increase. Practical steel has less oxidation than pure steel added Ni. There is much FeO in Fe-Ni alloy, compare to practical steel which has much Fe3O4. Especially, we could know considerable Ni was concentrated on the metal side in Fe-Ni alloy, practical steel. and the surface of the scale.

• Transactions on Electrical and Electronic Materials
• /
• 제8권6호
• /
• pp.246-249
• /
• 2007

A triple-band antenna was developed and fabricated by LDS(Laser Direct Structuring) process. The effects of the plating rate and heat treatment condition were investigated and the gains of fabricated antennas were measured at various frequencies. The laser irradiated surface shows clearly that there are prominence and depression. It shows anchoring effect between a plating material and ablation surface. The plating rate was decreased when the plating material is exhausted in the solution. This solution needs to refreshed by the new aid solution. The copper plating thickness is decreased with the increase of heat treatment temperature in the same time but it does not change other condition. The gain of LDS antenna showed higher than the generally processed antenna. This result was related with practical use of the dimension and effective dielectric constant.

• 한국세라믹학회지
• /
• 제27권6호
• /
• pp.808-816
• /
• 1990

The thermal behavior of transformation and characteristics of seeded sample powders prepared by simultaneous $\alpha$-Al2O3 seed addition with water on the Al-sec-butoxide hydrolysis were studied. $\alpha$-Al2O3 seed particles are shown to act as nuclei for transformation of $\theta$-to $\alpha$-Al2O3 and to result in an increase in thetransformation kinetics and lowering of the transformation temperature by as much as 143$^{\circ}C$. Simultaneous seed addition on the hydrolysis resulted in uniform dispersin and creation of nucleation site on seed surface and only 0.1wt% seeding lowered the transformation temperature by as much as 115$^{\circ}C$. For 3wt% seed addition, $\alpha$-Al2O3 single phase was obtained at 95$0^{\circ}C$ for 100 minutes and the specific surface area of products were lowered to 11.9$m^2$/g as compared with that of $\alpha$-Al2O3 powder prepared without seed at 115$0^{\circ}C$ ; 15.1$m^2$/g due to depression of vermicular structure growth.

• Journal of Microbiology and Biotechnology
• /
• 제32권6호
• /
• pp.783-791
• /
• 2022

Gamma-aminobutyric acid (GABA) improves various physiological illnesses, including diabetes, hypertension, depression, memory lapse, and insomnia in humans. Therefore, interest in the commercial production of GABA is steadily increasing. Lactic acid bacteria (LAB) have widely been reported as a GABA producer and are safe for human consumption. In this study, GABA-producing LAB were preliminarily identified and quantified via GABase assay. The acid and bile tolerance of the L. plantarum FBT215 strain were evaluated. The one-factor-at-a-time (OFAT) strategy was applied to determine the optimal conditions for GABA production using HPLC. Response surface methodology (RSM) with Box-Behnken design was used to predict the optimum GABA production. The strain FBT215 was shown to be acid and bile tolerant. The optimization of GABA production via the OFAT strategy resulted in an average GABA concentration of 1688.65 ± 14.29 ㎍/ml, while it was 1812.16 ± 23.16 ㎍/ml when RSM was applied. In conclusion, this study provides the optimum culture conditions for GABA production by the strain FBT215 and indicates that L. plantarum FBT215 is potentially promising for commercial functional probiotics with health claims.

• Journal of Oral Medicine and Pain
• /
• 제24권4호
• /
• pp.397-410
• /
• 1999

In order to obtain the basic data concerning the optimal parameters in using Nd:YAG laser as a therapeutic modality to dentinal hypersensitivity, the author prepared 3 sections of sound dentin and 10 sections of sclerotic dentin with thickness of $0.5mm{\pm}0.1mm$ from human extracted teeth of anteriors and premolars, and applied the laser energy from a fiberoptic delivered, free running, pulsed Nd:YAG laser (wavelength 1064nm, pulse duration $120{\mu}sec$, fiber diameter $320{\mu}m$) to surfaces of sound and sclerotic dentin sections for 1 second with contact/unidirectional moving mode of the fiber under speed of 3mm~4mm/sec and parameters of 0.5W/10Hz, 1.0W/10Hz, 1.5W/10Hz, 2.0W/10Hz: $62J/cm^2$, $124J/cm^2$, $187J/cm^2$, $249J/cm^2$. The author comparatively evaluated the characteristics of ultrastructural changes on surfaces of sound and sclerotic dentin sections irradiated by the pulsed Nd:YAG laser using the scanning electron microscopy. A fairly ill-defined bordered surface of partially closed and melted dentinal tubules can be seen on the scanning electron microscopic feature of the sound dentin surface irradiated by the pulsed Nd:YAG laser with energy density of $62J/cm^2$. The physical modification of sound dentin surface extensively occurred depended on the increase of energy density from $62J/cm^2$ to $124J/cm^2$, $187J/cm^2$, $249J/cm^2$. While, a fairly well-defined bordered surface of partially closed and melted dentinal tubules with thickened peritubular dentin can be seen on the scanning electron microscopic feature of the sclerotic dentin surface irradiated by the pulsed Nd:YAG laser with energy density of $62J/cm^2$. The physical modification of sclerotic dentin surface of a fairly rough, shallow depression with many cracks, thickened peritubular dentin and structureless dentinal tubules extensively occurred depended on the increase of energy density from $62J/cm^2$ to $124J/cm^2$, $187J/cm^2$, $249J/cm^2$ compared to those of sound dentin surface irradiated by the pulsed Nd:YAG laser under the same parameters. Therefore, it is recommended that the pulsed Nd:YAG laser as a therapeutic modality to dentinal hypersensitivity should be applied with the less energy density than $62J/cm^2$ on the sound dentin surface, and its energy density on the partially sclerotic dentin surface should be lower than that on the sound dentin surface to preserve tooth from unnecessary excessive structural destruction.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.588-590
• /
• 2008

The thermal signature of nucleation process is characterized by the induction time, the degree of supercooling, and the equilibrium temperature depression. The initiation of nucleation presents stochastic characteristics. The factors that affect nucleation are mechanical impact, ionic concentration, mineral surface characters, and pore size. Hydrate-bearing sediments behave mechanically like other cemented sediments. The data set has important implications for the calibration and interpretation of geophysical measurements and downhole logs collected in gas hydrate provinces, providing particular insight for the interpretation of P- and S-wave data and resistivity logs. In addition, laboratory formation history and ensuing pore-scale spatial distribution likely have a more pronounced effect on the macroscale mechanical properties of hydrate-bearing sediments