• 제목/요약/키워드: Surface characteristic

검색결과 2,492건 처리시간 0.033초

점오염원 형태의 유류누출 사건에 의한 실트질 토양층에서 BTEX와 TPH 성분의 오염도 연구 (The Contamination Characteristics of BTEX and TPH Components in Silty Soils with the Oil Leakage Event from Point Source)

  • 강동환;정상용;고동호
    • 지질공학
    • /
    • 제16권4호
    • /
    • pp.393-402
    • /
    • 2006
  • 본 논문에서는 점오염원 형태의 유류누출이 발생되었던 실트질 토양층에서 BTEX와 TPH 성분의 오염특성이 연구되었다. TPH 성분의 토양오염기준별 초과율은 BTEX 성분에 비해 $1.5{\sim}1.7$ 배정도 높았다. BTEX와 TPH 성분의 채취지점별 평균과 최대값은 B-zone>A-zone>C-zone의 순이며, 두 성분 모두 지표면하 $1{\sim}2m$구간에서 오염농도가 가장 높게 나타났다. 오염원에서 수리경사 하부 방향으로 120m와 80m 이내인 지역에서는 BTEX와 TPH 농도가 이격거리에 따라 증가하였으며, 120 m 이상 이격된 지역에서는 토양오염기순 이하인 것으로 나타났다. BTEX와 TPH 성분에 대한 지시크리깅의 제한값으로는 토양오염 확인기준, 우려기준 및 대책기준 값이 적용되었다. 지시변환된 자료의 베리오그램 분석에 의하면, BTEX와 TPH성분 모두 선형모델이 가장 적합한 것으로 나타났다. 선형모델을 적용한 BTEX와 TPH 성분의 확률도에서 토양오염 확인기준과 우려기준의 오염 범위는 유사하게 나타났으나, 대책기준의 오염 범위는 매우 축소되었다. 토양오염 확인기준, 우려기준 및 대책기준에 의해 작성된 확률도에서 BTEX와 TPH 성분의 최대 오염 확률은 BTEX성분이 26%, 26% 및 13%, TPH 성분은 44%, 38% 및 26%인 것으로 추정되었다.

집수빗물이용을 위한 지붕면 재질의 영향 (The Effect of Roofing Materials for Using Harvested Rainwater)

  • 이주영;김충일;김현우;한무영
    • 대한환경공학회지
    • /
    • 제34권9호
    • /
    • pp.623-629
    • /
    • 2012
  • 본 연구는 집수면으로 사용되는 지붕재질에 따라 집수되는 빗물의 수질을 평가하고, 지붕면에서 지의류/이끼의 존재여부에 따른 수질변화를 관찰하였다. 실험은 5가지 다른 재질의 재료[나무, 나무(이끼 서식), 콘크리트, 초벌기와, 슬레이트]로 설치된 지붕면에서 수행되었다. 각 지붕면에서의 빗물수질을 관찰한 결과, 초벌기와 지붕으로부터 집수된 빗물이 이용에 가장 적합한 재료로 나타났다. 이는 초벌기와 재질 특성에 따른 표면 온도의 상승과 자외선에 의한 살균효과 때문인 것으로 판단된다. 이끼류가 포함된 나무지붕과 일반 나무 지붕에서 집수된 빗물의 수질을 비교한 결과 이끼는 TOC, nitrate, sulfate 및 phosphate 농도에 영향을 미치는 것으로 관측되었다. 그리고 슬레이트 지붕으로부터 유출된 빗물 내 석면의 농도는 평균 0.002개/$cm^3$로 검출되었으며 이러한 결과는 환경부 다중이용시설기준 및 노동부 사무실 기준인 0.01개/$cm^3$ 규정을 만족한 것으로 나타났다.

유역 특성과 유출추적에 의한 단위도 해석에 관한 고찰 (A Study on the Interpretalion of the Synthetic Unit Hydrograph According to the Characteristics of catchment Area and Runoff Routing)

  • 서승덕
    • 한국농공학회지
    • /
    • 제8권1호
    • /
    • pp.1088-1096
    • /
    • 1966
  • The following is a method of synthetic unitgraph derivation based on the routing of a time area diagram through channel storage, studied by Clark-Jonstone and Laurenson. Unithy drograph (or unitgraph) is the hydrograph that would result from unit rainfall\ulcorner excess occuring uniformly with respect to both time and area over a catchment in unit time. By thus standarzing rainfall characteristics and ignoring loss, the unitgraph represents only the effects of catchment characteristics on the time distribution of runoff from a catchment The situation abten arises where it is desirable to derive a unitgraph for the design of dams, large bridge, and flood mitigation works such as levees, floodways and other flood control structures, and are also used in flood forecasting, and the necessary hydrologie records are not available. In such cases, if time and funds permit, it may be desirable to install the necessary raingauges, pruviometers, and stream gaging stations, and collect the necessary data over a period of years. On the otherhand, this procedure may be found either uneconomic or impossible on the grounds of time required, and it then becomes necessary to synthesise a unitgraph from a knowledge of the physical charcteristics of the catchment. In the preparing the approach to the solution of the problem we must select a number of catchment characteristic(shape, stream pattern, surface slope, and stream slope, etc.), a number of parameters that will define the magnitude and shape of the unit graph (e.g. peak discharge, time to peak, and base length, etc.), evaluate the catch-ment characteristics and unitgraph parameters selected, for a number of catchments having adequate rainfall and stream data and obtain Correlations between the two classes of data, and assume the relationships derived in just above question apply to other, ungaged, Catchments in the same region and, knowing the physical characteritics of these catchments, substitute for them in the relation\ulcorner ships to determine the corresponding unitgraph parameters. This method described in this note, based on the routing of a time area diagram through channel storage, appears to provide a logical line of research and they allow a readier correlation of unitgraph parameters with catchment characteristics. The main disadvantage of this method appears to be the error in routing all elements of rainfall excess through the same amount of storage. evertheless, it should be noted that the synthetic unitgraph method is more accurate than the rational method since it takes account of the shape and tophography of the catchment, channel storage, and temporal variation of rainfall excess, all of which are neglected in rational method.

  • PDF

$Al(OH)_3$ 함유(含有) 인조대리석폐기물(人造大理石廢棄物)로부터 제조(製造)된 알루미나 분말(粉末)의 특성(特性) 및 소결거동(燒結擧動) 연구(硏究) (The Characterization and Sintering Behavior of Alumina Powder Prepared by Heat-treatment of Artificial Marble Waste Containing $Al(OH)_3$ Powder)

  • 류성수;서성규;김형태;김형준;박준규;양재규
    • 자원리싸이클링
    • /
    • 제18권2호
    • /
    • pp.69-76
    • /
    • 2009
  • 본 연구에서는 수산화 알루미늄이 다량 포함되어 있는 인조대리석 폐기물을 폐광산지역의 지하수 및 지표수 등에서 검출되는 유해중금속 제거용으로 재활용 가능성을 조사하고자 하였다. 이를 위해 폐기물을 $550^{\circ}C$에서 $1000^{\circ}C$ 온도범위에서 열처리하여 알루미나 분말을 추출하였으며, 이렇게 얻어진 열처리분말에 대해 온도에 따른 상변화를 XRD를 통해 분석하고, 비표면적 측정, SEM 분석 등을 통해 분말의 특성을 조사하고, 중금속인 비소의 흡착특성을 조사하였다 그 결과, 열처리된 알루미나 산화물 분말이 중금속 처리에 효과가 있음을 확인할 수 있었으며, 열처리분말의 구성성분에 영향을 받는다는 것을 알 수 있었다. 또한, 열처리 분말 성형체를 소결한 결과, $1200^{\circ}C$ 이하에서 60% 이상의 높은 기공률을 가진 펠렛을 제조할 수 있었으며, 소결조제인 glass 분말의 첨가에 의해 $900^{\circ}C$의 낮은 소결온도에서도 기공률을 유지하면서 비교적 높은 비소흡착률을 가지는 시편을 제조할 수 있었다.

고체연료화 방법을 적용한 우분 처리 가능성 평가 (Feasibility test for Solidified Fuel with Cow Manure)

  • 정광화;김중곤;이동준
    • 한국지하수토양환경학회지:지하수토양환경
    • /
    • 제22권6호
    • /
    • pp.112-119
    • /
    • 2017
  • In this study, the availability of cow manure as raw material for solid fuel production was investigated. Since the water content of the cow manure was too high, it was dewatered using a laboratory hydraulic compressure ($11.3kg/cm^2$). The moisture content of the cow manure decreased from 82.01% to 73.36 wt.%. The dewatered cow manure was homogenized by the experimental apparatus and then put into the rotating cylindrical apparatus. From the consecutive processes, the cow ball-shaped pellet which size ranged from 3.0 to 25.0 mm was produced. The major factor for making palletized fuel from cow manure was the moisture content. Based on the experimental data, the moisture content of cow manure for pelletizing cow manure was identified as 65~75 wt.%. When the moisture content of the cow manure was lower than 30 wt.%, the diameter of the pellets maded from cow manure was smaller than 3 mm. On the other hand, when the water content of the cow manure was higher than 75 wt/%, the diameter of the processed pellets tended to be larger than 25 mm. The characteristics of the processed cow manure pellets was analyzed to be in accordance with the livestock solid fuel quality standard. The pyrolysis characteristic of the pellet was analyzed by raising the heating temperature of the experimental equipment from 200 to $900^{\circ}C$. The mass change between of 20 and $130^{\circ}C$ corresponds to the amount of moisture contained in the cow manure. The amount of moisture was about 15% of the total weight of cow manure samples. The cow manure pellet was thermally stable up to $280^{\circ}C$. It can be interpreted that combustion of cow manure pellet does not occur until the surface temperature reaches $280^{\circ}C$. The mass change of pellet between of 280 and $450^{\circ}C$ was considered to be due to the vaporization of volatile organic compounds (VOCs) present in the cow manure pellet. The maximum production of VOCs was showed near $330^{\circ}C$.

가축분뇨액비 지중살포기의 견인력 및 살포 특성 (Pulling Force and Manure Spreading Characteristic of Tractor-drawn Animal Slurry Manure Sub-soil Injector)

  • 최광재;이성현;유병기;오권영;박환중;이상태
    • 한국축산시설환경학회지
    • /
    • 제11권1호
    • /
    • pp.25-34
    • /
    • 2005
  • 1. 트랙터 삼점히치탑재형 지중살포기 가. 5련 치즐푸라우에 의해 토양 파쇄가 이루어지고 용적식 워블판 펌프에 의해 지중에 압송 살포하는 구조로 설계 제작되었다. 나 슬러리 가축분뇨살포기의 지중깊이별 축분살포기 견인력은 토앙파쇄 깊이 50mm에 비해 100mm일 때 550kgf에서 600kgf로 조금 증가하였으나 토양파쇄 깊이 150mm에서는 약 800kgf로 급격히 증가하였다. 다. 슬러리가축분뇨 송출장치로 오수펌프와 토출관 사이 압력조절탱크 설치로 분뇨토출 분지관의 살포균일성을 높일 수가 있었다. 2. 트랙터 견인형 지중살포기 가. 5련 치즐플라우에 의한 토양파쇄 후베인형 진공펌프에 의해 슬러리 가축분뇨를 지중에 압송 살포하는 장치로 제작되었다. 나. 슬러리 가축분뇨 지중살포기의 살포 깊이별 견인력은 반 건조 상태인 논 토양의 경우 지표살포 683kgf, 살포 깊이 l0cm에서 1,062kgf, 깊이15cm에서 1,214kgf로 나타났으며, 살포 깊이 20cm에서는 트랙터의 슬립발생 증가하여 작업이 곤란하였다. 다. 시작기의 밭 토양에서 견인력은 지표살포 784kgf, 살포 깊이 l0cm에서 997kgf, 깊이 15cm에서 1,320kgf, 깊이 20cm에서 1,670kgf로 나타나 살포 깊이가 증가함에 따라 견인력이 크게 증가하는 경향이었다. 라. 슬러리가축분뇨를 토양에 압송$\cdot$살포하는 송출관에 분배관 설치로 토출관간 슬러리가 축분뇨의 토출균일성을 높일 수 있었고, 송출관의 압력조절밸브를 조정하면 10a당 살포량 조절이 가능하였으며, 지중살포 깊이는 10${\~}$15 cm 수준이 적합한 것으로 판단된다.

  • PDF

예비 수요자 주택선호특성을 고려한 유형별 고령자주택 개발방안에 관한 연구 -수도권을 중심으로- (A study of the elderly housing type development plan considering the Preconsumer Housing Characteristic -focused on Seoul metropolitan area-)

  • 김민창;원유호;이주형
    • 한국산학기술학회논문지
    • /
    • 제15권5호
    • /
    • pp.2844-2858
    • /
    • 2014
  • 산업화와 도시화를 경험한 사회는 인구통계학적변화를 경험하고 있다. 이러한 변화는 세계적으로 고령화 인구를 점차 증가시키고 있으며, 이러한 현상이 세계적으로 확산되고 있다. 한국도 2000년에 고령화 사회에 접어 들어들었으며, 2018년에는 고령 사회가 직면할 것으로 예상된다. 따라서 이러한 현상에 대비한 고령자주택의 개발 등의 노인의 라이프 생활을 고려한 주택개발이 강조되고 있다. 본 연구의 목적은 고령자 주택에 입주하기 원하는 예비 수요자의 특성에 따른 결정요인을 분석하는 것을 목적으로 한다. 이를 바탕으로 본 연구에서는 유형별로 보다 세분화하여 이항 로지스틱 회귀분석을 통한 고령자 주택의 선택의사에 미치는 영향요인을 세분화 하였다. 이를 통해 개선방안 및 시사점을 도출하였는데 이에 대한 시사점으로, 첫째, 고령자주택은 개발 유형별로 선호하는 특성이 상이하게 도출됨을 알 수 있었다. 둘째, 개인특성에 따른 지표가 가장 많은 부분을 차지하고 있어 고령자주택의 수요조사가 우선적으로 시도되어야 함을 알 수 있었다. 셋째, 도심형 고령자주택 개발 시 원활한 개발을 위해 지자체 차원의 지가를 고려한 토지확보 방안이 필요하다. 넷째, 교외형 고령자주택 개발 시 경기도권에 수요층이 자연스럽게 고령자주택으로 입주하고 생활할 수 있도록 근교에 생활환경기반을 마련해야 할 것이다. 마지막으로 전원형 고령자주택 개발 시 다양한 생산, 여가 등의 프로그램의 도입되어야 할 것으로 판단된다.

흰쥐에서 체감각유발장전위의 기록부위별 특성과 경로분석 (Characteristics and Pathways of the Somatosensory Evoked Field Potentials in the Rat)

  • 신현철;박용구;이배환;류재욱;조춘식;정상섭
    • Journal of Korean Neurosurgical Society
    • /
    • 제30권7호
    • /
    • pp.831-841
    • /
    • 2001
  • Objective : Somatosensory evoked potentials(SSEPs) have been used widely both experimentally and clinically to monitor the function of central nervous system and peripheral nervous system. Studies of SSEPs have reported the various recording techniques and patterns of SSEP. The previous SSEP studies used scalp recording electrodes, showed mean vector potentials which included relatively constant brainstem potentials(far-field potentials) and unstable thalamocortical pathway potentials(near-field potentials). Even in invasive SSEP recording methods, thalamocortical potentials were variable according to the kinds, depths, and distance of two electrodes. So they were regarded improper method for monitoring of upper level of brainstem. The present study was conducted to investigate the characteristics of somatosensory evoked field potentials(SSEFPs) of the cerebral cortex that evoked by hindlimb stimulation using ball electrode and the pathways of SSEFP by recording the potentials simultaneously in the cortex, VPL nucleus of thalamus, and nucleus gracilis. Methods : In the first experiment, a specially designed recording electrode was inserted into the cerebral cortex perpendicular to the cortical surface in order to recording the constant cortical field potentials and SSEFPs mapped from different areas of somatosensory cortex were analyzed. In the second experiment, SSEPs were recorded in the ipsilateral nucleus gracilis, the contralateral ventroposterolateral thalamic nucleus(VPL), and the cerebral cortex along the conduction pathway of somatosensory information. Results : In the first experiment, we could constantly obtain the SSEFPs in cerebral cortex following the transcutaneous electrical stimulation of the hind limb, and it revealed that the first large positive and following negative waves were largest at the 2mm posterior and 2mm lateral to the bregma in the contralateral somatosensory cortex. The second experiment showed that the SSEPs were conducted by way of posterior column somatosensory pathway and thalamocortical pathway and that specific patterns of the SSEPs were recorded from the nucleus gracilis, VPL, and cerebral cortex. Conclusion : The specially designed recording electrode was found to be very useful in recording the localized SSEFPs and the transcutaneous electrical stimulation using ball electrode was effective in evoking SSEPs. The characteristic shapes, latencies, and conduction velocities of each potentials are expected to be used the fundamental data for the future study of brain functions, including the hydrocephalus model, middle cerebral artery ischemia model, and so forth.

  • PDF

소나무 원목의 천연건조 중 함수율 변화: II. 소나무 원목의 천연건조 중 함수율 변화 예측 (Moisture Content Change of Korean Red Pine Logs During Air Drying: II. Prediction of Moisture Content Change of Korean Red Pine Logs under Different Air Drying Conditions)

  • HAN, Yeonjung;CHANG, Yoon-Seong;EOM, Chang-Deuk;LEE, Sang-Min
    • Journal of the Korean Wood Science and Technology
    • /
    • 제47권6호
    • /
    • pp.732-750
    • /
    • 2019
  • 천연건조 중 목재의 함수율 변화 예측모형을 제시하기 위하여 15본의 소나무 원목에 대한 천연건조를 수행하였다. 초기함수율이 68.7%인 6본의 소나무 원목에 대하여 여름철에 천연건조를 시작한 후 약 880일이 경과한 후의 최종함수율은 17.4%이었다. 초기함수율이 35.8%인 9본의 소나무 원목에 대하여 겨울철에 천연건조를 시작한 후 약 760일이 경과한 후의 최종함수율은 16.0%이었다. 소나무 원목의 말구지름, 온도, 상대습도, 풍속을 독립변수로 결정하고, 천연건조 중 감소한 함수율을 종속변수로 다중회귀분석을 진행한 결과, 결정계수 0.925의 회귀모형을 얻을 수 있었다. 소나무 원목의 특성인 초기함수율과 말구지름이 기상조건인 온도, 상대습도, 풍속에 비하여 천연건조 중 함수율 감소에 미치는 영향이 더 크게 나타났다. 천연건조 중 내부함수율의 분포 및 함수율 변화를 예측하기 위하여 2차원 물질전달 해석을 수행하였다. 건조일수를 서로 다르게 적용하고, 수분확산계수 및 표면방사계수를 결정하는 기상조건을 다르게 적용한 2가지의 예측모형을 제시하였다. 2가지 적용 방법의 오차는 0.1 - 0.8%의 범위였으며, 측정값과의 차이는 2.2 - 3.6%의 범위였다. 다양한 초기함수율과 말구지름의 소나무 원목에 대한 천연건조 중 내부함수율을 측정하고, 각각의 기상조건에 대한 목재 내 수분이동계수를 산출하면 예측모형의 오차를 감소시킬 수 있을 것으로 판단된다.

망간첨착 활성탄의 다기능성을 이용한 3가 비소 및 페놀 제거 (Removal of As(III) and Phenol by Multi-functional Property of Activated Carbon Impregnated With Manganese)

  • 유목련;홍순철;양재규;장윤영
    • 한국지하수토양환경학회지:지하수토양환경
    • /
    • 제13권3호
    • /
    • pp.52-58
    • /
    • 2008
  • 여러 조건으로 제조한 망간첨착활성탄(Mn-AC)을 유기물과 무기물이 함께 오염되어 있는 합성 폐수처리에 적용하였다. 유기물과 무기물의 대표물질로 각각 페놀과 3가 비소를 선정하였다. Mn-AC의 물리화학적 특성과 안정성을 분석한 후, 회분식 반응조에서 활성탄(AC) 및 Mn-AC에 의한 3가 비소 및 페놀 흡착 특성을 조사하였다. Mn-AC의 안정성 평가를 위해 pH 2에서 4의 산성용액에서 용출되는 망간의 농도로부터 평가하였다. pH 3 이하에서는 Mn-AC로부터 많은 양의 망간이 용출되었지만, pH 4에서는 청정지역 허용기준인 3 ppm 이하의 농도로 용출되었다. Mn-AC에 대한 X-선 회절기 분석결과 첨착된 망간은 $Mn_2O_3$로 밝혀졌다. Mn-AC를 이용한 3가 비소와 페놀의 동시처리 실험결과 3가 비소는 낮은 pH에서 AC보다 높은 산화율을 보였으나, 중성 이상의 pH에서는 AC가 더욱 높은 산화율을 보였다. 활성탄에 망간을 첨착시킴으로서, 비표면적이 13% 감소하였고 이로서 Mn-AC에 의한 페놀제거율은 AC에 비해 8% 정도 줄어들었다. 3가 비소 산화 및 페놀 흡착실험을 통하여 Mn-AC는 복합오염물을 갖는 폐수의 동시처리에 적용될 수 있음을 알 수 있었다.