• 대한원격탐사학회지
• /
• 제25권2호
• /
• pp.155-163
• /
• 2009

여름철 우리나라 서해 연안을 관측한 SAR영상에서 다수의 내부파가 관측되고 있으며 이들은 동지나해에서 관측되는 내부파들에 비하여 소규모이며 상대적으로 많은 연구가 이루어지지 않고 있다. 이러한 내부파들은 여름철 표층 해수의 혼합을 발생시킴으로서 해양 생물학적으로 중요한 역할을 하며 대륙붕에서의 퇴적물 이동 및 음파의 전달에 있어서도 중요한 요소로서 서해의 물성 특성 연구에 있어서 반드시 고려되어야 한다. 내부파의 특성 분석을 위해서는 시공간적인 정보가 필요하며 이를 위해서는 현장 관측과 위성 관측이 동시에 이루어져야 한다. 본 연구에서는 2002년 5월 29일 현장 관측과 동시에 획득된 SAR영상을 분석하고 영상에 나타난 내부파와 동일한 내부파를 시간에 따른 수심별 등온선의 변화에서 분석 추적하였다.

• 한국통신학회논문지
• /
• 제6권1호
• /
• pp.51-57
• /
• 1981

半導'||'&'||'#20307;內에서 運動하는 carrier는 Piezo 壓電物質을 進行하는 彈性波에 利得이나 損失을 줄 수 있게 된다. 本 論文에서는 半導 film에서의 drifting carrier와 Piezo 壓電 基板上을 進行하는 Rayleigh Wave間의 相互作用의 表面彈性波 增幅을 論하였다. Piezo 壓電媒質에서 表面波 의 電磁的 境界條件이 表面波 速度에 미치는 影響에 대한 式을 求하였다. 增幅에 필요한 bunching 電子 電子 散에 의해 抑制되므로 높은 周波數에서 利得의 低下를 招來하나 적당한 壓電 物質일 경우 超高周波 領域에서도 상당한 增幅이 기대됨을 알 수 있다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계학술발표회 논문집(I)
• /
• pp.330-333
• /
• 2006

In this paper experimental tests were performed to evaluate velocities of the acoustic waves through prestressed concrete beam and source locations using AE technique. Seven AE sensors are mounted on the surface of 5m length test beam with equal spacing and using Schmidt Hammer AE events are made 18 locations. The velocities of AE signals are evaluated using the time differences of arrival times and the distances between the AE source loactions and the AE sensor locations. In addition, using the Least Square Method, the AE source locations are re-evaluated reversely using both of the arrival times and the velocities of AE signals. Test results show the average velocity of the AE signals is about 4,000m/sec and the velocity decreased with the increase of the trevalling times due to the effect of attenuation. Based on the estimation of the source locations, it is observed that the accuracy of source location is increased when the velocity of each AE sensor used rather than the average velocity.

• 한국연안방재학회지
• /
• 제4권1호
• /
• pp.7-19
• /
• 2017

In this study, waves and currents observed by acoustic AWAC, VECTOR and Aquadopp Profiler in Anmok coastal waters were analysed to account for the variability of wave and current and to understand the mechanism of sediment transport generated by wave-induced current in the surf-zone. The monthly variation of wave and residual currents were analysed and processed with long-term observed AWAC data at station W1, located at the water depth of about 18m measured during from February 2015 to September 2016. Wave-induced currents were also analysed with intensive field measurements such as wave, current, suspended sediment, and bathymetry data observed at the surf-zone during in winter and summer. The statistical result of wave data shows that high waves coming from NNE and NE in winter (DEC-FEB) are dominant due to strong winds from NE. But in the other season waves coming from NE and ENE are prevalent due to the seasonal winds from E and SE. The residual currents with southeastern direction parallel to the shoreline are dominant throughout a year except in winter showing in opposite direction. The speed of ebb-dominant southeastern residual currents decreasing from surface to the bottom is strong in summer and fall but weak in winter and spring. By analysing wave-induced current, we found that cross-shore current were generated by swell waves mainly in winter with incoming wave direction about $45^{\circ}$ normal to the shoreline. Depending on the direction of incoming waves, longshore currents in the surf-zone were separated to southeastern and northwestern flows in winter and summer respectively. The variation of observed currents near crescentic bars in the surf-zone shows different direction of longshore and cross-shore currents depending on incoming waves implying to the reason of beach erosion generating the beach cusp and sandbar migration during high waves at Anmok.

• 한국소음진동공학회논문집
• /
• 제22권8호
• /
• pp.771-776
• /
• 2012

A technique is presented that uses a circular waveguide for the measurement of the bulk shear(S-wave) velocities of unconsolidated, saturated media, with particular application to near surface soils. The technique requires the measurement of the attenuation characteristics of the fumdamental T(0,1) mode that propagates along an embedded pipe, from which the acoustic properties of the surrounding medium are inferred. From the dispersion curve analysis, the feasibility of using T(0,1) mode which is non-dispersive and have constant attenuation over all frequency range is discussed. The principles behind the technique are discussed and the results of an experimental laboratory validation are presented. The experimental data are best fitted for the different depths of wetted sand and the shear velocities as a function of depths are formulated using power law curves.

• 비파괴검사학회지
• /
• 제13권2호
• /
• pp.40-47
• /
• 1993

분말 야금법에 의해 제조된 SiC휘스커 강화 2124알루미늄 복합재료(SiCw/2124 Al)에 피로하중이 작용할 경우 복합재료의 계면에 있어서의 전위의 집적현상으로 인해 피로손상에 매우 민감하다. 그러나 이와같은 계면에 있어서의 전위의 집적현상으로 발생하는 피로미소균열의 검출 및 그 특성 평가에 대해서는 종래의 초음파 기술로서는 많은 문제점이 지적되고 있다. 본 논문은 SiC 휘스커 강화 알루미늄 복합재료에 있어서의 초기 피로손상을 평가하기 위하여 최근 새로운 비파괴 기법인 선집속 빔초음파 현미경의 적용 가능성에 대하여 연구하였다. 이를 위해 SiCw/2124 Al 복합재료 시험편에 대해 하중제어하에서 누설표면파와 누설유사표면파의 속도를 V(z)곡선으로 부터 FFT해석으로 구해 그 특성에 대하여 검토하였다. 또 주파수 5MHz에 대한 종래의 표면파 기법에 의하여 얻어진 결과와 고주파 초음파 현미경에 의하여 구해진 결과를 비교 검토 하였다.

• 한국생산제조학회지
• /
• 제19권2호
• /
• pp.198-203
• /
• 2010

In this paper, study on the mode characteristics analysis of the SH-EMAT (shear horizontal, electromagnetic acoustic transducer) waves for evaluating the thickness reduction in plates such as corrosion and friction is presented. Noncontact methods for ultrasonic wave generation and detection have been a great concern and highly demanded due to their capability of wave generation and reception on surface of high temperature or on rough surface. Mode identification of the SH-EMAT wave is carried out in an aluminum plate with thinning defects using time frequency analysis method such as wavelet transform, compared with theoretically calculated group velocity dispersion curve. The changes of various wave features such as the amplitude and the time-of-flight have been observed and the correlations with the thickness reduction have been investigated. Firstly, experiments have been conducted to confirm that it is possible to selectively generate and receive specific desired SH modes. These modes have then been analyzed to select the parameters that are sensitive to the thickness change. The results show that the mode cutoff and the time-of-flight changes are feasible as key parameters to evaluate the thickness reduction.

• 한국지진공학회논문집
• /
• 제19권6호
• /
• pp.257-263
• /
• 2015

Recently two seismic cloaking methods of earthquake engineering have been suggested. One is the seismic wave deflection method that makes the seismic wave bend away and the other is the shadow zone method that makes an area that seismic waves cannot pass through. It is called as seismic cloaking. The fundamental principles of the seismic cloaking by variable refractive index were explained. A two-dimensional cylindrical model which was composed of 40 layers of different density and modulus was tested by numerical simulation. The center region of the model to be protected is called 'cloaked area' and the outer region of it to deflect the incoming wave is called 'cloaking area' or 'cloak area.' As the incoming surface wave is approaching to the cloaking area, the refractive index is decreasing and, therefore, the velocity and impedance are increasing. Then, the wave bends away the cloaked area instead of passing it. Three cases are tested depending on the comparison between the seismic wavelength and the diameter of the cloaked region. The advantage and disadvantage of the method were compared with conventional earthquake engineering method. Some practical requirements for realization in fields were discussed.

• 전기학회논문지
• /
• 제59권2호
• /
• pp.390-396
• /
• 2010

An 80MHz surface acoustic wave (SAW)-based gyroscope utilizing a progressive wave was developed on a piezoelectric substrate. The developed sensor consists of two SAW oscillators in which one is used for sensing element and has metallic dots in the cavity between input and output IDTs. The other is used for a reference element. Coupling of mode (COM) modeling was conducted to determine the optimal device parameters prior to fabrication. According to the simulation results, the device was fabricated and then measured on a rate table. When the device was subjected to an angular rotation, oscillation frequency differences between the two oscillators were observed because of the Coriolis force acting on the metallic dots. Depending on the angular rate, the difference of the oscillation frequency was modulated. The obtained sensitivity was approximately 52.35 Hz/deg.s within the angular rate range of 0~1000 deg/s. The performances of devices with three IDT structures for two kinds of piezoelectric substrates were characterized. Good thermal stability was also observed during the evaluation process.

• 한국정보통신학회논문지
• /
• 제15권4호
• /
• pp.773-779
• /
• 2011

자유전단류(Shear free flow) 가정을 이용한 수상함 항적모델을 잠수함에 적용 결과 잠수함 난류항적 지름은 $x^n,\;({\frac{1}{5}}{\leq}n\;<{\frac{1}{2}})$ 에 비례하였으며, 난류항적의 최소 확산을 가정할 때(${\sigma}=50.25$, 즉 ${\infty}\;x^{1/5}$인 경우), 길이65m, 폭 6.5m 속력 6kts 인 잠수함의 난류항적 반지름은 잠수함 함미로부터 1.2Km 후방에서 약 20m, 10Km 후방에서는 약 30m에 달하였고, 해수면에서 관측 가능한 잠수함 난류항적은 잔잔한 해상상태에서 잠수함 후방 약 15Km에 이르는 것으로 나타났으나 쇄파가 발생하는 악천후에서는 해수면에서 난류항적을 관측하기는 매우 제한되었다. 이는 적어도 서해와 같이 얕은 잠수함 작전환경에서는 잠수함 난류항적이 해수면에서 나타나는 것을 의미하며 SAR와 같은 탐지체계를 이용 시 탐색 가능함을 의미한다.