• 대한추나의학회지
• /
• 제4권1호
• /
• pp.141-153
• /
• 2003

Objectives : The purpose of this study is researching for correlation between Moire topography results and questionnaire which include obesity rate, height, weight, posture, pain aspect (low back pain, headache, fatigue, neck pain etc), studying posture, school attendance method, menarche. Methods : The authors practiced Moire topography and questionnaire for primary & middle school 24,419 students [male 12,843, female 11,576] in Jeonbuk, korea in 2002. After we distinguished students who had abnormal finding in Moire topography and statistically analysed the data. Results : According to this research, the abnormal finding in Moire topography results was 37.3% (9,105 students), and students needed X-ray re-examination were 3.9% (953 students). According to statistical analysis, male/female and primary/middle school students have no difference in deformity degree of the body surface examined by Moire. Height and weight have low correlation with deformity degree of the body surface examined by Moire and menarche, pain aspect have no correlation. But, school attendance method by bicycle and $90^{\circ}$upright sitting in study posture is the best way to decrease the deformity degree of the body surface examined by Moire. Conclusions : Following this research, throughout Moire topography could detect trunk asymmetry that couldn't be found existing X-ray examination, and school attendance by bicycle and $90^{\circ}$upright sitting in study posture is good for school students to prevent back deformity.

• 지구물리와물리탐사
• /
• 제11권2호
• /
• pp.93-98
• /
• 2008

실제 육상 탄성파 탐사는 불규칙한 지표 지형이 있는 탄성 매질에서 수행되며, 이 경우 지표의 불규칙한 특성이 파의 전파에 영향을 미치게 된다. 지형을 고려한 탄성파 전파특성을 규명하기 위해서 주파수 영역 가중평균 유한요소법을 이용한 2차원 탄성파 모델링을 연구하였다. 먼저 지표 굴곡이 없는 균질 반무한 공간에 대해 지표 위에 공기층이 있는 경우와 없는 경우를 비교해서 공기층의 존재가 계산 결과에 미치는 영향을 확인하였다. 불규칙 지표를 포함하는 모형에 가중평균 유한요소법을 적용할 경우 일반적인 유한요소법의 경우에 비해 격자 개수를 적게 설정할 수 있어 계산시간을 절약할 수 있고 수치 계산 주시에도 큰 차이가 없음을 확인하였다. 지표면에 경사면과 계단 형태의 불규칙 지형이 있는 균질 모형에 대한 탄성파 거동을 살펴보면 불규칙 지표면의 모서리에서 새로운 송신원이 존재하는 것과 같은 효과가 나타나는 것과 레일리파가 불규칙 지표에서 더 커지는 것을 확인할 수 있었다.

• Environmental Analysis Health and Toxicology
• /
• 제23권1호
• /
• pp.47-51
• /
• 2008

The toxicity of environmental pollutants was measured between a image of the surface topography in HeLa cells using atomic force microscopy for the possibility of toxic effect measurement and environmental monitoring. A image of the surface topography by AFM were estimated as toxic endpoints. The surface topography by AFM was observed a change of the cell surface in the environmental pollutants, but the standard of the measurement requires for the dose-effect degree. The overall results indicate that the possibility of measurement using AFM were confirmed a dose-effect degree related toxic effects, but it requres correlation between more various biomarker and AFM's measurements if the possibility of the toxic effect measurement was established.

• 한국세라믹학회지
• /
• 제31권3호
• /
• pp.249-256
• /
• 1994

By surface structure and X-ray topographic observation, growth mechanism of NAB single crystal grown by TSSG technique using a BaB4O7 flux was studied. Surface structure of grown crystals were investigated by optical microscope. Growth history and crystal defects included within grown crystal were investigated using X-ray topography. The {001} faces were grown by 2-D nucleation growth. As decreasing cooling rate, growth mechanism of {111} and {11} was changed from 2-D nucleation growth to the growth by screw dislocation. Only surface striations developed parallel to a-axis were observed on {010} faces. Growth sector of NAB crystals were divided into {001}, {111}, {010}, {021}, {11}. The inclusion which was usually trapped between {001} faces was investigated.

• 한국대기환경학회지
• /
• 제24권6호
• /
• pp.649-661
• /
• 2008

The impact of the detailed surface data on regional meteorological fields in complex coastal area is studied using RAMS. Resolutions of topography and land use data are very important to numerical modeling, because high resolution data can reflect correct terrain height and detail characteristics of the surface. Especially, in complex coastal region such as Gwangyang area, southern area in Korean Peninsula, high resolution topography and land use data are indispensable for accurate modeling results. This study investigated the effect of resolutions of terrain data using SRTM with 3 second resolution topography and KLU with 1 second resolution land use data. Case HR was the experiment using high resolution data, whereas Case LR used low resolution data. In Case HR, computed surface temperature was higher than Case LR along the coastline and wind speed was $1{\sim}2m/s$ weaker than Case LR. Time series of temperature and wind speed indicated great agreement with the observation data. Moreover, Case HR indicated outstanding results on statistical analysis such as regression, root mean square error, index of agreement.

• Journal of the Optical Society of Korea
• /
• 제13권2호
• /
• pp.245-250
• /
• 2009

We propose a digital holographic interference analysis method based on a 2-frame phase-shifting technique for measuring an optical mirror surface. The technique using 2-frame phase-shifting digital interferometry is more efficient than multi-frame phase-shifting techniques because the 2-frame method has the advantage of a reduced number of interferograms, and then takes less time to acquire the wanted topography information from interferograms. In this measurement system, 2-frame phase-shifting digital interferograms are acquired by moving the reference flat mirror surface, which is attached to a piezoelectric transducer, with phase step of 0 or $\pi$/2 in the reference beam path. The measurements are recorded on a CCD detector. The optical interferometry is designed on the basis of polarization characteristics of a polarizing beam splitter. Therefore the noise from outside turbulence can be decreased. The proposed 2-frame algorithm uses the relative phase difference of the neighbor pixels. The experiment has been carried out on an optical mirror which flatness is less than $\lambda$/4. The measurement of the optical mirror surface topography using 2-frame phase-shifting interferometry shows that the peak-to-peak value is calculated to be about $0.1779{\mu}m$, the root-mean-square value is about $0.034{\mu}m$. Thus, the proposed method is expected to be used in nondestructive testing of optical components.

• 대한기계학회논문집A
• /
• 제25권11호
• /
• pp.1737-1742
• /
• 2001

The fractal-based method for describing rubbed surface texture has aroused great interest. The determination of rubbed surface topography is believed to be extremely important in the areas of contact mechanics, adhesion and friction. In order to describe topography of the rubbed surface, the wear test was carried out with annular surfaces of wear testing specimens in dry friction. furthermore, the relation between the fractal dimensions and the frictional conditions are also investigated and fractal descriptors was applied to rubbed surface with image processing. Fractal dimension can be determined by sum of intensity difference of image surface pixel. Fractal dimension increased according as the applied load and sliding distance increase. Topography of the rubbed surface can be effectively obtained by fractal dimensions.

• Restorative Dentistry and Endodontics
• /
• 제43권1호
• /
• pp.10.1-10.8
• /
• 2018

Objectives: To examine the surface topography of intact WaveOne (WO; Dentsply Sirona Endodontics) and WaveOne Gold (WOG; Dentsply Sirona Endodontics) nickel-titanium rotary files and to evaluate the presence of alterations to the surface topography after root canal preparations of severely curved root canals in molar teeth. Materials and Methods: Forty-eight severely curved canals of extracted molar teeth were divided into 2 groups (n = 24/each group). In group 1, the canals were prepared using WO and in group 2, the canals were prepared using WOG files. After the preparation of 3 root canals, instruments were subjected to atomic force microscopy analysis. Average roughness and root mean square values were chosen to investigate the surface features of endodontic files. The data was analyzed using one-way analysis of variance and post hoc Tamhane's tests at 5% significant level. Results: The surface roughness values of WO and WOG files significantly changed after use in root canals (p < 0.05). The used WOG files exhibited higher surface roughness change when compared with the used WO files (p < 0.05). Conclusions: Using WO and WOG Primary files in 3 root canals affected the surface topography of the files. After being used in root canals, the WOG files showed a higher level of surface porosity value than the WO files.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 추계학술대회 논문집
• /
• pp.133-136
• /
• 1998

The scanning Maxwell-stress microscopy (SMM) is a dynamic noncontact electric force microscopy that allows simultaneous access to the electrical properties of molecular system such as surface potential, surface charge, dielectric constant and conductivity along with the topography. Here we report our recent results of its application to nanoscopic study of domain structures and electrical functionality in organic thin films prepared by the Langmuir-Blodgett technique.

• 한국측량학회지
• /
• 제24권2호
• /
• pp.159-165
• /
• 2006

본 논문에서는 위성고도계자료를 이용하여 개발된 평균해면모델인 CLS_SHOM과 지구중력장 모델인 EGM96으로부터 평균해면고와 지오이드고를 계산하여 해면지형을 계산하고, 이를 이용하여 지형류의 흐름을 추정하였다 지형류의 추정을 통하여 해양의 물리학적인 특성을 연구할 수 있기 때문에 외국에서는 많은 연구가 수행되어 왔으나 우리나라의 경우에는 연구가 이루어지지 않은 상태이다. 본 연구에서는 지형류에 대한 기초연구로서 동해에서의 지형류 흐름특성을 분석하여 제시하였다. 연구결과 동해지역에 대한 해면지형의 평균은 약 37cm로 계산되었고, 지형류 속도는 평균 -0.028m/sec로 계산되었다. 지형류의 흐름은 태평양 해수가 대한해협을 통과하면서 속도가 증가한 후에 일본열도의 외측단을 따라서 동북동 방향으로 거의 일정한 속도로 흐르다가 좁은 Tsugaru 해협과 Soya 해협을 통하여 유출되며, 한반도의 동해안을 따라서 북쪽으로 흐르다가 Soya해협과 북동북으로 향하여 Okhotsk해로 유출되는 것으로 나타났다.