• Journal of Korean Society for Quality Management
• /
• v.28 no.2
• /
• pp.57-69
• /
• 2000

This paper discusses the local influence approach to the linear regression models with AR(2) errors. Diagnostics for the linear regression models with AR(2) errors are proposed and developed when simultaneous perturbations of the response vector are allowed- That is, the direction of maximum curvature of local influence analysis is obtained by studying the curvature of a surface associated with the overall discrepancy measure.

• Solar Energy
• /
• v.20 no.3
• /
• pp.21-30
• /
• 2000

It is necessary to estimate the regression coefficients in order to predict the monthly mean daily global radiation on a horizontal surface. Therefore many different equations have proposed to evaluate them for certain areas. In this work, a new correlation has been made to predict the solar radiation for any area over Korea by estimating the regression coefficients taking into account percentage of possible sunshine, and cloud cover. Particularly, the multiple linear regression model proposed shows reliable results for estimating the global radiation with average deviation of -1 to 3 % from the measured values.

• Journal of the Korean Society for Precision Engineering
• /
• v.11 no.1
• /
• pp.219-229
• /
• 1994

This paper describes an expert system on the cylindrical grinding operations in order to establish the optimum grinding conditions, which satisfy the maximum removal rates, considering the several constraints of grinding power, workpiece burn, chatter vibration and surface roughness. Specialized knowledge of the grinding operations are acquired from the actual operation database. Coefficientis in the experimental equations are obtaines through the fuzzy regression model based on the fuzzy set theory, and are stored in the actual operation database. The developed system is capable of determining the optimum grinding conditions taking into account some problems, and practical examples of implementaion are described.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.04a
• /
• pp.1-2
• /
• 2011

Hybrid rockets have lately attracted attention as a strong candidate of small, low cost, safe and reliable launch vehicles. A significant topic is that the first commercially sponsored space ship, SpaceShipOne vehicle chose a hybrid rocket. The main factors for the choice were safety of operation, system cost, quick turnaround, and thrust termination. In Japan, five universities including Hokkaido University and three private companies organized "Hybrid Rocket Research Group" from 1998 to 2002. Their main purpose was to downsize the cost and scale of rocket experiments. In 2002, UNISEC (University Space Engineering Consortium) and HASTIC (Hokkaido Aerospace Science and Technology Incubation Center) took over the educational and R&D rocket activities respectively and the research group dissolved. In 2008, JAXA/ISAS and eleven universities formed "Hybrid Rocket Research Working Group" as a subcommittee of the Steering Committee for Space Engineering in ISAS. Their goal is to demonstrate technical feasibility of lowcost and high frequency launches of nano/micro satellites into sun-synchronous orbits. Hybrid rockets use a combination of solid and liquid propellants. Usually the fuel is in a solid phase. A serious problem of hybrid rockets is the low regression rate of the solid fuel. In single port hybrids the low regression rate below 1 mm/s causes large L/D exceeding a hundred and small fuel loading ratio falling below 0.3. Multi-port hybrids are a typical solution to solve this problem. However, this solution is not the mainstream in Japan. Another approach is to use high regression rate fuels. For example, a fuel regression rate of 4 mm/s decreases L/D to around 10 and increases the loading ratio to around 0.75. Liquefying fuels such as paraffins are strong candidates for high regression fuels and subject of active research in Japan too. Nakagawa et al. in Tokai University employed EVA (Ethylene Vinyl Acetate) to modify viscosity of paraffin based fuels and investigated the effect of viscosity on regression rates. Wada et al. in Akita University employed LTP (Low melting ThermoPlastic) as another candidate of liquefying fuels and demonstrated high regression rates comparable to paraffin fuels. Hori et al. in JAXA/ISAS employed glycidylazide-poly(ethylene glycol) (GAP-PEG) copolymers as high regression rate fuels and modified the combustion characteristics by changing the PEG mixing ratio. Regression rate improvement by changing internal ballistics is another stream of research. The author proposed a new fuel configuration named "CAMUI" in 1998. CAMUI comes from an abbreviation of "cascaded multistage impinging-jet" meaning the distinctive flow field. A CAMUI type fuel grain consists of several cylindrical fuel blocks with two ports in axial direction. The port alignment shifts 90 degrees with each other to make jets out of ports impinge on the upstream end face of the downstream fuel block, resulting in intense heat transfer to the fuel. Yuasa et al. in Tokyo Metropolitan University employed swirling injection method and improved regression rates more than three times higher. However, regression rate distribution along the axis is not uniform due to the decay of the swirl strength. Aso et al. in Kyushu University employed multi-swirl injection to solve this problem. Combinations of swirling injection and paraffin based fuel have been tried and some results show very high regression rates exceeding ten times of conventional one. High fuel regression rates by new fuel, new internal ballistics, or combination of them require faster fuel-oxidizer mixing to maintain combustion efficiency. Nakagawa et al. succeeded to improve combustion efficiency of a paraffin-based fuel from 77% to 96% by a baffle plate. Another effective approach some researchers are trying is to use an aft-chamber to increase residence time. Better understanding of the new flow fields is necessary to reveal basic mechanisms of regression enhancement. Yuasa et al. visualized the combustion field in a swirling injection type motor. Nakagawa et al. observed boundary layer combustion of wax-based fuels. To understand detailed flow structures in swirling flow type hybrids, Sawada et al. (Tohoku Univ.), Teramoto et al. (Univ. of Tokyo), Shimada et al. (ISAS), and Tsuboi et al. (Kyushu Inst. Tech.) are trying to simulate the flow field numerically. Main challenges are turbulent reaction, stiffness due to low Mach number flow, fuel regression model, and other non-steady phenomena. Oshima et al. in Hokkaido University simulated CAMUI type flow fields and discussed correspondence relation between regression distribution of a burning surface and the vortex structure over the surface.

• Journal of Environmental Science International
• /
• v.18 no.4
• /
• pp.355-367
• /
• 2009

Comparison study on the land surface temperatures, which are calculated from four different algorithms for MODIS data, was carried out and the characteristics of each algorithm on land surface temperature estimation were also analysed in this study. Algorithms, which are well used for various satellite data analysis, in the comparisons are proposed by Price, Becker and Li, Ulivieri et al., and Wan. Verification of estimated land surface temperature from each algorithm is also performed using observation based regression data. The coefficient of determination ($R^2$) for daytime land surface temperature estimated from Wan's algorithm is higher than that of another algorithms at all seasons and the value of $R^2$ reach on 0.92 at spring. Although $R^2$ for Ulivieri's algorithm is slightly lower than that for Wan's algorithm, the variation pattern of land surface temperature for two algorithms are similar. However, the difference of estimated values among four algorithms become small at the region of high land surface temperature.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.21 no.6
• /
• pp.1031-1040
• /
• 1997

This study was done to analyze the body surface developments of armhole area. The major conclusions of this study are: 1. The body surface developments showed the characteristics of expansion and contraction of body at armhole area. By arm movements, front armhole lines on the body surface developments of upper arm were slow going, but back armhole lines were full and round. As a whole, armhole line of the back torso was swollen outside especially at backarmpit point area, it seemed like a line of raglan sleeve. 2. Regression Analysis was carried out to adapt armhole line on the upper arm and upper body to bodice and sleeve pattern, following the axillary circumference line and chest breadth line changed to the basic pattern form. As the result, armhole lines of 90$^{\circ}$ and 135-180$^{\circ}$ movements deviated from those of standard posture. U-type, clear armhole curve of standard posture turned to V-type, slanting line by arm movements.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2002.10b
• /
• pp.321-322
• /
• 2002

This paper presents study of effects of cutting parameters such as cutting speed, feed rate and depth of cut on the surface roughness in hard turning. Taguchi Method and linear regression model of design parameters were utilized to identify the controlling process parameters that can monitor the surface roughness in the hard turning operation. In the process optimization, experimental planning was performed using the orthogonal array and concept of the signal-to-noise ratio. Cutting parameters such as speed, feed rate, and depth of cut were selected as process parameters and the ANOVA analysis showed that feed rate and cutting speed had more effect on the roughness variation that depth of cut.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.609-612
• /
• 2004

Geometric shape in a surface material sometimes produces different slopes that have different illuminations. It causes some difficulties to get same classification results or to identify as an object for the different facets in a surface material. A regression method is suggested to adjust the spectral information of different facets in a surface material using image segments. The method to adjust spectral information in a building facets was very successful. The most important advantage of this method is to keep the intensity of spectral information as well as spectral response. This method can also be implemented in an adaptive way.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.22 no.7
• /
• pp.892-900
• /
• 1998

This study was done to analyze the surface development of upper arm for planning sleeve armhole line. The major conclusions of this study are: 1. The surface development by arm movements made the expansion and contraction of upper arm surface changes easily visible. Armhole lines of 90$^{\circ}$and 135$^{\circ}$~180$^{\circ}$movements deviated from those of standard posture. 2. According to regression analysis, armhole lines on the upper arm were adapted to sleeve patten, following the axillary circumference line changed to biceps line. Sleeve cap length ranged from armhole/4+2.5cm to armhole/4$\pm$0.5cm. 3. Compared to Rim's pattern method, ascending and descending amounts of armhole lines were represented as fixed values.

• Food Science and Biotechnology
• /
• v.14 no.5
• /
• pp.698-699
• /
• 2005

Levels of fumonisins, mycotoxins produced by fungal species, must be accurately and rapidly monitored to ensure food safety. In this study, using surface plasmon resonance sensor, a batch-type biosensor was fabricated to detect fumonisin $B_1$. By applying this biosensor to fumonisin $B_1$ solutions of 0 to 6 ppm, a significant calibration model was developed for measurement. Coefficient of determination in regression analysis for the model was 0.920. Results indicate that detection of fumonisin $B_1$ by surface plasmon resonance biosensor was highly feasible.