• Korean Chemical Engineering Research
• /
• 제46권2호
• /
• pp.227-232
• /
• 2008

화장품용 천연계면활성제를 개발하기 위해 도라지(platycodon grandiflorum) 껍질에서 유기용매를 이용하여 추출물을 얻었다. 도라지 추출물의 화장품용 계면활성을 측정하기 위해 계면장력, 용해도, 기포력, 분산력, 유화력, 유화활성, 유화안정성을 측정하였고 피부자극을 평가하기위해 첩포시험을 실시하였다. 도라지 사포닌 함량이 0.005 wt%일 때 castor oil에 대한 계면장력은 11.5 dyn/cm로 비교대상인 Tween 40이나 quillaja bark보다 낮은 계면활성을 보여주었다. 도라지 추출물은 화장품에 유상으로 사용되는 olive oil, soybean oil, canola oil에 대해서도 우수한 유화활성과 유화안정성을 나타내었다. 2~5%의 도라지 추출물과 글리세린을 사용한 피부자극 시험에서는 도라지 추출물은 약간의 피부자극을 보여 주었다. 결론적으로 도라지 추출물은 화장품용 계면활성력은 양호하나 다소의 피부자극을 보여주었다.

• 복식
• /
• 제57권3호
• /
• pp.53-62
• /
• 2007

The purpose of this study was to investigate mechanical and comfort performances of the material for the improved working uniform for a volunteer fire brigade member, to get basic data for its evaluation and to help its material and design development. The results were as follows; The material of the newly developed working uniform was thinner and lighter than the material of the current used working uniform. It had better breathability, air permeability and heat transmission rate than the current one. It also had superior anti-flammability In all mechanical properties(tensile, bending, shearing, compression and surface properties), it showed better performances than the current one. It elongated and bended easier and more in both warp and weft directions. The elastic recovery and shape stability after elongation were also higher. The recovery and resistance to shearing and the resiliency and recovery after compression were also better than the current one. It was more flexible, softer and smoother in primary hand value, and was more suitable for the material for winter suit which needs softness and fullness in total hand value. The material of the improved working uniform showed lower thermal insulation value and higher evaporative resistance value compared to the material of the currently used working uniform from the sweating thermal manikin test. It was shown that the physical performances and the hand value of the textile material used in the newly developed working uniform for a volunteer fiber brigade member was improved compared to the one used in the currently used working uniform.

• Bulletin of the Korean Chemical Society
• /
• 제25권5호
• /
• pp.639-646
• /
• 2004

Metal treated activated carbons are prepared using various metals. Adsorption behaviors, morphologies, as well as antibacterial effects of metal treated samples are compared before and after solvent washing. Adsorption isotherms are used to characterize the porous structure of metal treated activated carbons before and after the solvent washing with acetone or ethyl alcohol. From these data, it is noticed that the changes in physicochemical properties of metal treated activated carbons depend on the solvents employed. Similar results are observed from BET data obtained from nitrogen adsorption isotherms. From scanning electron microscopy (SEM) studies, the changes in shape and size of metal particles are observed after the samples are washed with solvents. These changes result in different blocking effects, which, in turn, affect the adsorption behavior of metal treated activated carbons. X-ray diffraction (XRD) patterns of the samples treated with different metals are different each other. High intense sharp peaks attributed to metals are observed from silver treated samples, while the peaks are not observed from copper treated samples. To compare thermodynamic behavior of metal treated activated carbons washed with different type of solvents, differential scanning calorimetric (DSC) analysis is carried out. The analysis shows similar endothermic curves for all of the samples. Finally, antibacterial effects of metal treated activated carbon against Escherichia coli are discussed. Comparing the effects among the metals employed, highest effects are obtained from Cd, while lowest effects are obtained from Cu. Antibacterial activity becomes higher with the increase of the amount of metals treated, Optimum concentrations of metals to treat activated carbons, obtained from a shake flask test, are known to be 0.4, 0.1, and 0.6 moles for Ag, Cd, and Cu, respectively.

• Computers and Concrete
• /
• 제22권5호
• /
• pp.481-492
• /
• 2018

In this paper, a new hybrid fiber system (NHFS) is investigated for the application of slab. The steel fiber, polyvinyl alcohol (PVA) fiber and calcium carbonate ($CaCO_3$) whisker is added to form NHFS. The four-point bending test is carried out on the flexural properties of slab with plain, steel fiber, traditional hybrid fiber system (THFS) and NHFS reinforced cementitious composites. The flexural behavior is evaluated by ASTM C1018-97, JCI-SF4 and post-crack strength (PCS) technique. The evaluation parameters of flexural toughness such as toughness index (TI), equivalent flexural strength (EFS) and PCS are determined. The size of slab specimens is $15mm(thickness){\times}50mm(width){\times}200mm(length)$. The results show that adding $CaCO_3$ whisker to THFS can significantly improve the flexural strength, TI, EFS, PCS of the slab. The empirical relation between reinforcing index ($RI_v$) and flexural parameters show that flexural parameters of slabs increase first and then decrease; which indicates that optimum $RI_v$ values can be helpful in the considering the mix design of steel-PVA fibers-$CaCO_3$ whisker composites for achieving the desired flexural-related properties. The scanning electron microscopy is performed to observe the micro-morphological characteristics of the fracture surface, which proved the positive hybrid effect among the different fibers in cementitious composites. The NHFS can arrest the generation and propagation of the crack from micro to macro level.

• 대한기계학회논문집
• /
• 제17권6호
• /
• pp.1351-1360
• /
• 1993

본 연구에서는 수적법(hand lay up : HLU)을 이용하여 단 섬유포(chopped strand mat : CSM)형태의 유리섬유를 불포화 폴리에스테르 수지에 강화시킨 복합 적층 판을 대상으로 해수중에서 굽힘·피로시험을 실시하여 피로균열 성장거동을 관찰하고 파면관찰을 통하여 GERP의 피로특성을 검토하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.490.1-490.1
• /
• 2014

The ZnO nanowire (NW)-based nanogenerators (NGs) can have rectifying current and potential generated by the coupled piezoelectric and semiconducting properties of ZnO by variety of external stimulation such as pushing, bending and stretching. So, ZnO NGs needed to enhance durability for stable properties of NGs. The durability of the metal electrodes used in the typical ZnO nanogenerators(NGs) is unstable for both electrical and mechanical stability. Indium tin oxide (ITO) is used as transparent flexible electrode but because of high cost and limited supply of indium, the fragility and lack of flexibility of ITO layers, alternatives are being sought. It is expected that carbon nanotube and Ag nanowire conductive coatings could be a prospective replacement. In this work, we demonstrated transparent flexible ZnO NGs by using CNT/Ag nanowire hybrid electrode, in which electrical and mechanical stability of top electrode has been improved. We grew vertical type ZnO NW by hydrothermal method and ZnO NW was coated with hybrid silicone coating solution as capping layer to enhance adhesion and durability of ZNW. We coated the CNT/Ag nanowire hybrid electrode by using bar coating system on a capping layer. Power generation of the ZnO NG is measured by using a picoammeter, a oscilloscope and confirmed surface condition with FE-SEM. As a results, the NGs using the CNT/Ag NW hybrid electrode show 75% transparency at wavelength 550 nm and small change of the resistance of the electrode after bending test. It will be discussed the effect of the improved flexibility of top electrode on power generation enhancement of ZnO NGs.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2010년도 춘계학술발표대회
• /
• pp.49.1-49.1
• /
• 2010

The particle generation during the plasma enhanced process is highly considered as serious problem in the semiconductor manufacturing industry. The material for the plasma processing chamber requires the plasma etching characteristics which are homogeneously etched surface and low plasma etching depth for preventing particulate contamination and high durability. We found that the materials without grain boundaries can prevent the particle generation. Therefore, the amorphous material with the low plasma etching rate may be the best candidate for the plasma processing chamber instead of the polycrystalline materials such as yttria and alumina. Three glasses based on $SiO_2$ and $Al_2O_3$ were prepared with various rare-earth elements (Gd, Y and La) which are same content in the glass. The glasses were plasma etched in the same condition and their plasma etching rate was compared including reference materials such as Si-wafer, quartz, yttria and alumina. The mechanical and thermal properties of the glasses were highly related with cationic field strength (CFS) of the rare-earth elements. We assumed that the plasma etching resistance may highly contributed by the thermal properties of the fluorine byproducts generated during the plasma exposure and it is expected that the Gd containing glass may have the highest plasma etching resistance due to the highest sublimation temperature of $GdF_3$ among three rare-earth elements (Gd, Y and La). However, it is found that the plasma etching results is highly related with the mechanical property of the glasses which indicates the cationic field strength. From the result, we conclude that the glass structure should be analyzed and the plasma etching test should be conducted with different condition in the future to understand the plasma etching behavior of the glasses perfectly.

• 대한기계학회논문집A
• /
• 제36권12호
• /
• pp.1529-1534
• /
• 2012

본 연구에서는 DIC 법을 이용하여 두께 $12{\mu}m$ 의 구리박막에 대한 인장시험을 수행하였다. 시험결과 정밀한 응력-변형률 곡선의 시험결과를 얻을 수 있었으며, 특히 잉크젯프린터를 이용한 시험편 표면 스펙클패턴의 작성은 DIC 법을 적용하기가 어려운 시험편 표면의 콘트라스트가 낮은 경우에 유용하게 사용할 수 있을 것이다. 측정된 구리박막의 기계적 물성은 탄성계수 E = 89.2 GPa, 0.2% 오프셋 항복응력 $S_{0.2%}$= 232.8 MPa, 인장강도 $S_u$= 319.2 MPa, 파단연신률 ${\varepsilon}_f$= 16.8 %, Poisson 비 ${\nu}$= 0.34 의 결과를 얻었으며, 탄성계수는 알려진 벌크소재에 대한 결과보다는 작다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제15권4호
• /
• pp.125-135
• /
• 2011

폴리프로필렌섬유보강 시멘트 복합재료와 구조용 합성섬유의 부착특성을 평가하였다. 폴리프로필렌섬유는 0.10%, 0.15% 및 0.20%의 체적비로 적용하여 dog-bone 시험을 실시하였다. 구조용 합성섬유와 폴리프로필렌섬유보강 시멘트 복합재료 사이의 부착강도는 폴리프로필렌섬유의 혼입률이 증가할수록 증가하였으나 0.20% 이상이 되면 감소하였다. 또한 폴리프로필렌섬유의 첨가는 계면인성과 마찰저항을 증가시킨다. 인발시험 후 구조용 합성섬유 표면의 미소구조 분석은 폴리프로필렌섬유의 혼입률이 증가할수록 긁힘 현상이 증가하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제17권6호
• /
• pp.122-129
• /
• 2013

콘크리트의 전기저항은 염소이온 확산계수와 비교하여 빠르고 간단히 측정할 수 있기 때문에, 염소이온 확산계수를 제어하기 위한 간접적인 지표로서 활용될 수 있다. 전기저항은 해양구조물의 유지관리 전략을 수립하는데 매우 중요하다. 본 연구의 목적은 전기저항측정의 프로토콜을 설계하는 것이다. 본 연구는 염소이온과의 관계성을 토대로 콘크리트의 성능을 파악하는 중요한 비파괴 접근방법을 제시하였다. 수분, 공극량, 공극간 굴곡특성 등과 같은 미세구조 특성이 전기저항에 미치는 영향을 배합조건별 수화단계별로 고찰하였다. 전기저항과 염소이온 확산계수의 관계로부터 정규적인 전기저항의 측정을 토대로 염소이온 확산계수를 간접적으로 통제하는데 본 성과가 이용될 수 있다.