• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.148-148
• /
• 2015

Over the past several years, Colloidal core/shell type quantum dots lighting-emitting diodes (QDLEDs) have been developed for the future of optoelectronic applications. An inverted-type quantum-dot light-emitting-diode (QDLED), employing low work function organic material polyethylenimine ethoxylated(PEIE) (<10 nm)[1] modified ZnO nanoparticles (NPs) as electron injection and transport layer, was fabricated by all solution processing method, instead of electrode in the device. The PEIE surface modifier incorporated on the top of the ZnO NPs film, facilitates the enhancement of both electorn injection into the CdSe-ZnS QD emissive layer by lowering the workfunction of ZnO from 3.58eV to 2.87eV and charge balance on the QD emitter. In this inverted QDLEDs, blend of poly (9,9-di-n-octyl-fluorene-alt-benzothiadiazolo) and poly(N,N'-bis(4-butylphenyl)-N,N'-bis(phenyl)benzidine] are used as hole transporting layer (HTL) to improve hole transporting property. At the operating voltage of 7.5 V, the QDLED device emitted spectrally orange color lights with high luminance up to 11110 cd/m2, and showed current efficiency of 2.27 cd/A.[2]

• Journal of Korean Society of Forest Science
• /
• v.68 no.1
• /
• pp.18-31
• /
• 1985

Users' satisfaction and behavior at five mini parks in the central area of Seoul City were investigated under the encironmental design evaluation framework. The major findings are as follows; 1) The major user group is a student group with the ages ranging from 15 to 24. 2) Half of the users spend 20 to 60 minutes in these parks. 3) According to the multiple regression analysis, the variables related to the satisfaction in daytime are noise level, sunshine, plants, crowding, and surface slope, where those in nighttime are quality of surrounding buildings, turf area, lighting, shade, and sculpture or fountain. 4) According to the free response, the basic needs inmini parks are shade for rest and such amenity facilities as bench, trash basket, and drinking fountain. In addition to these basic needs, users prefer such visually pleasing objects as sculpture and fountain.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.3106-3106
• /
• 2001

Imaging spectrometry or hyperspectral imaging is a recent development that makes possible quantitative and qualitative measurement for food quality and safety. This paper presents the research results that a hyperspectral imaging system can be used effectively for detecting fecal (from duodenum, cecum, and colon) and ingesta contamination on poultry carcasses from the different feed meals (wheat, mile, and corn with soybean) for poultry safety inspection. A hyperspectral imaging system has been developed and tested for the identification of fecal and ingesta surface contamination on poultry carcasses. Hypercube image data including both spectral and spatial domains between 430 and 900 nm were acquired from poultry carcasses with fecal and ingesta contamination. A transportable hyperspectral imaging system including fiber optically fabricated line lights, motorized lens control for line scans, and hypercube image data from contaminated carcasses with different feeds are presented. Calibration method of a hyperspectral imaging system is demonstrated using different lighting sources and reflectance panels. Principal Component and Minimum Noise Fraction transformations will be discussed to characterize hyperspectral images and further image processing algorithms such as image band ratio of dual-wavelength images and its histogram stretching with thresholding process will be demonstrated to identify fecal and ingesta materials on poultry carcasses. This algorithm could be further applied for real-time classification of fecal and ingesta contamination on poultry carcasses in the poultry processing line.

• Journal of Biosystems Engineering
• /
• v.22 no.3
• /
• pp.311-316
• /
• 1997

Two methods were used to detrermine the net photosynthetic rate(NPR) in the plug stand using a wind tunnel for plug seedlings Production. One is called as the integration method in which NPR calculated by the use of air current speed and $CO^2$ concentration measured at any heights above the medium surface in a wind tunnel were summed. It was assumed that the air flow at any layer did not mix with the lower or upper air layer. The other is called as the diffusion method in which eddy diffusivities above the plug stand were used to determine the NPR in the plug stand. In this method, $CO^2$ above or inside the plug stand was assumed to be absorbed vertically. NPR determined by the diffusion method was 28~45% of the NPR calculated by the integration method. Considering the magnitude of NPR and the effects of the air current speed on NPR, the integration method would be adequate for the calculation of NPR in the plug stand. Maximum NPR determined using the integration method appeared at the air current speed of 0.7m $s^{-1}$. It was ascribed to the decreased diffusion resistances of $CO^2$ with the increasing air current speed. NPR at the rear region in plug stand was 20~34% lower than that at the front region. NPR sharply decreased with the increase of an elapsed time after the beginning of photoperiod. Therefore $CO^2$ enrichment would be effective to force the growth of plug seedlings in a semi-closed ecological system under artificial lighting.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.11
• /
• pp.690-695
• /
• 2014

In this paper, we develop a explosion-proof LED lighting (Ex circuit) circuit of Explosion-proof LED Signal Lamp (Ex LSL) to utilize the core module of the explosion-proof Local Control System (Ex LCS) for offshore plant applications. And then analyzed its electrical, optical and thermal characteristics. Ex circuit was applied input voltage from AC/DC(12~254) V. In this experiments, stable light-on characteristics were confirmed by eyes for the every input voltages with min. 78,462 and max. $517,975cd/m^2$ of luminance. also Output current and output luminance was made proportional. Because the measured maximum surface temperature of Ex circuit was $54.23^{\circ}C$ at AC 48 V, Ex circuit was rated with T6 of temperature class. Finally, Ex circuit was shown stable light on characteristics under the $-50^{\circ}C$ and $60^{\circ}C$ during 12 hours of test period.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.58 no.4
• /
• pp.632-632
• /
• 2009

The purpose of this study is to present the range of defects mentioned in the Product Liability (PL) and to establish an objective basis and grounds for the analysis of accidents expected to happen by analyzing and presenting the external flame pattern and electrical characteristics of an LED streetlight lamp, a new lighting lamp. From the analysis of the cross-section of a cable carbonized by an external flame, it was observed that the wire's strand and insulation material had solidly adhered, and that greater voids were formed at the surface than at the center. Irregular carbide lumps were formed in the globe directly exposed to the flame, and the globe carbonized by the indirect flame showed characteristics that they had melted and flowed downward. It was found that the forward and backward resistances of the normal LED were approximately 1.74 [$M{\Omega}$] and 140 [$M{\Omega}$], respectively. The lamp burnt by the strong flame exhibited infinite forward and backward resistances and the LED did not emit light. The carbonized LED lamp was gray and exhibited fine delaminations. According to the Product Liability, a product defect signifies a simple product defect. Most of the defects were caused by the lack of stability, and the defect of the product itself occurred during the design and manufacture. The defects in warnings and markings include an insufficiency of handling manuals and warnings, expressive warranty violations, defective markings, etc. In order to prevent an accident resulting from a product, it is necessary to prepare safety warnings and documentation, establish clear-cut lines of liabilities, and subscribe insurances. However, it could be seen that important factors against the Product Liability were product improvement, response to compensation requests and law suits, credit restoration, etc.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.2
• /
• pp.215-222
• /
• 2015

To improve the ocean waves of the ship maneuvering simulator, we study and summarize the visualization elements of the ocean waves and the overall direction of their implementation in detail. We categorize the visualization elements of the ocean waves into five groups, including wave surface, wave breaking, interaction, lighting effects, and underwater. We also analyze the design and implementation issues of the visualization of the ocean waves for ship maneuvering simulator with respect to realistic and real-time ocean visualization, ship dynamics, and application purposes. Through the analysis, we have found that the realistic visualization of ocean waves plays an important role in the generation of immersiveness, more accurate ship motion, and the various and controllable simulation scenarios for the ship maneuvering simulator. Additionally, we have confirmed that there are many visualization elements, methods, and limitations to be considered for the visualization of the ocean waves for ship maneuvering simulator, and we have concluded that the systematic design is required before implementation.

• Journal of Biosystems Engineering
• /
• v.36 no.5
• /
• pp.377-383
• /
• 2011

This study proposed the new method of discerning the assembled parts and presuming the position of central point in a Cowl Cross Bar (CCB) using a Charge-Couple Device (CCD) camera attached to a robot in the auto assembly line. Three control points of an ellipse were decided by three reference points, which were equally distanced. The radii of these reference points were determined by the size of the object, and the repeated presumption secured the precise determination. The comparison of the central point of ellipse presumed by Randomized Hough Transform (RHT) with the part information stored in a database was used for determining the faulty part in an assembly. The method proposed in this study was applied for the real-time inspection of elliptical parts, such as bolt, nut hole and so on, connected to a CCB using a CCD camera. The findings of this study showed that the precise decision on whether the parts are inferior or not can be made irrespective of the lighting condition of industrial site and the noises of the surface of the part. In addition, the defect decision on the individual elliptic parts assembled in a CCB showed more than 98% accuracy within a 500-millisecond period at most.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.11B
• /
• pp.1403-1412
• /
• 2011

This study performed a detecting research of promising R&D field utilizing intuitive methodology regarding OLED illumination industry. For this, 69 professionals of the illumination industry in Korea were composed as a panel to hold an in-depth interview and survey for 1 month. The study classified the OLED illumination industry as 4 fields of panel, material/component for panel, manufacturing equipment, and lighting system, and selected core technology for each field, and divided it into a total of 14 possible fields for R&D. As a result of evaluating the technological competitive power for each field, the field in Korea which received the highest technological competitive power was OLED panel, and contrarily, technological competitive power of material/component for OLED panel showed the lowest, which requires improvement Meanwhile, evaluating economical aspect, conformity to policy, and effectiveness of R&D in general, 7 promising R&D fields were selected. The 4 core technologies of OLED panel, which are, white, transparent, color change and flexible OLED manufacturing technology were evaluated as the most promising fields, and next, organic material for surface light source, material/component for substrate and equipment for forming large sized substrate were evaluated as promising fields.

• Journal of Korea Game Society
• /
• v.17 no.1
• /
• pp.7-16
• /
• 2017

The 3D game graphic technology has become an important factor in the contents field with the game contents development. In particular, game character technology provides a realistic technique and visual pleasure, as well as an intermediate step in the immersion of the game in which the game might create an optical illusion that enables the player to enjoy heroic adventure in the game. The high expression level of characters in 3D games is a key factor in the development process, with details and carefulness of the character setting work [3]. In this paper, we propose a character representative technique applied to mobile games using mathematical model of radiosity energy, spectral radiance model, and ray tracing model method using 3D unity game engine with sensible AI algorithm for game implementation. As a practical application to the game contents, it was found that the projection of the surface in the rendering process and the game simulation might change according to the lighting condition of the game content environment, so that the high quality of game characters was simulated.