• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 C
• /
• pp.1585-1587
• /
• 1997

We investigated the generation of high pretilt angle for nematic liquid crystal (NLC) in the cell with slanted non-polarized ultraviolet (UV) light irradiation on two kinds of the polyimide (PI) film. It was shown that the monodomain alignment in NLC is obtained in the cell with slanted non-polarized UV light irradiation on PI surface. The pretilt angle of NLC is generated about 3 degrees in the cell with slanted non-polarized UV light irradiation with 70 degrees on PI surface without side chain. But, the pretilt angle of NLC is generated about 1 degree in the cell with slanted non-polarized UV light irradiation with 80 degrees on PI surface with side chain. We consider that the pretilt angle generation in NLC is attributted to anisotropic dispersion force between the LC molecular and the PI surface.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 C
• /
• pp.2109-2111
• /
• 2005

The effect of arc like streamer discharge is investigated on the hydrogen generation in the plasma reactor with multineedle - plate electrode geometry and SDR (Plasma reactor using the surface discharge). An additive of the two type (the saw type and the pellet type) was placed under the water surface to investigate the effect of the water surface conditions. The experimental results are compared in case of the reactor with and without an additive on the water surface. The generation of arc streamer discharge is more powerful with increasing applied voltage in the saw type. The maximum hydrogen Production concentration is about 4300 ppm at 74W in the SDR with additive of the saw type. Also, the Energy yield of the SDR (28990 g/kWh, 4300ppm, 74W) is higher than of the multineedle - plate electrode geometry (20892g/kWh, 3300ppm, 77W).

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 C
• /
• pp.1873-1875
• /
• 2003

Surface corona discharge characteristics of a ac corona charged ferroelectric pellet barrier have been investigated experimentally. Electric charged stored on the surfaces of the ferroelectric pellets by a at corona discharge provide partial electric fields on the surfaces of the ferroelectric pellets, which could generate surface corona discharges on the ferroelectric pellets. This system utilizes both the surface discharges on the ferroelectric pellet barrier and the corona discharge between wire electrodes. As a result, in the case of the corona discharge with the ferroelectric pellet barrier, the mean corona current and ozone generation increase greatly, and the surface discharges on the ferroelectric pellets can be generated efficiently. It is also found that, the ferroelectric pellet barrier discharge reactor had better discharge characteristics for plasma generation than the wire-to-wire discharge reactor without pellets.

• 소성∙가공
• /
• 제12권2호
• /
• pp.151-160
• /
• 2003

In the present study, an advanced surface construction method based on NURBS surface scheme is proposed to construct the extrusion die surface. The inlet and outlet profiles we precisely described with NURBS curves using the cubic appropriate control points and weights. The interior control Points of surface are generated using the cubic interpolation of the weights at the inlet and outlet sections. In order to verify of the proposed method, automatic surface generation is carried out for the various types of extrusion die surface.

• 전기화학회지
• /
• 제14권4호
• /
• pp.191-195
• /
• 2011

Wet chemical etching methods were utilized to conduct Si surface texturing, which could enhance photoelectrochemical hydrogen generation rate. Two different etching methods tested, which were anisotropic metal-catalyzed electroless etching and isotropic etching. The Si nano-texture that was fabricated by the anisotropic etching showed ~25% increase in photocurrent for H2 generation. The photocurrent enhancement was attributed to the reduced reflection loss at the nano-textured Si surface, which provided a layer of intermediate density between water and the Si substrate.

• Bulletin of the Korean Chemical Society
• /
• 제24권2호
• /
• pp.161-162
• /
• 2003

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.634-637
• /
• 2002

In order to contribute to trial of the ocean weather forecasts, we have developed new generation sea surface temperature. It is clod free, high-spatial resolution daily SST product, which enables us to follow the movements of SST patterns relating to the oceanic variations. The product is produced through an objective analysis merging various infrared and microwave SST products.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.409-414
• /
• 2007

Wettability of solid surfaces with liquids is governed by the chemical properties and the microstructure of the surfaces. We report on the preparation of liquid-repellent surfaces using surface-attached monolayers of perfluorinated polymer molecules on porous silica substrates. A covalent attachment of the polymer molecules to the substrate is achieved by generation of the polymer chains through starting a surface-initiated radical-chain polymerization of a fluorinated monomer. To this, self-assembled monolayers of azo initiators are attached to silica substrates, which are used to kick off the polymerization reaction in situ. The growth of the fluorinated polymer films and the characterization of the obtained surfaces by surface plasmon spectroscopy, XPS, and contact angle measurements is described. It is shown that perfluorinated polymer films can be grown with controlled thicknesses on flat and even on porous silica surfaces, essentially without changing the surface roughness. The combination of the low surface energy coating and the surface porosity allows generation of materials which are both water and oil repellent.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 D
• /
• pp.1391-1394
• /
• 1998

In this paper, we investigated the generation of pretilt for nematic liquid crystal (NLC) in a cell with linearly polarized ultraviolet (UV) light irradiation on polyimide (PI) surface. The pretilt angle of the NLC increases with increasing the incident angle in the cells with S-wave polarized UV light irradiation on PI surface. It is considered that the pretilt angle of the NLC increased due to decreasing the UV light intencity. We suggest that the pretilt angle of the NLC is attributed to asymmetry triangular of the polymer surface with S-wave polarized UV light irradiation on PI surface. Also, we consider that the asymmetry triangular of the Polymer not formed with P-wave polarized UV light irradiation on PI surface. Therefore, the pretilt angle of the NLC is attributed to asymmetry triangular of the polymer surface with UV light irradiation on PI surface.

• Journal of Mechanical Science and Technology
• /
• 제15권2호
• /
• pp.160-171
• /
• 2001

Depending upon the method of the surface generation and the quality of the designed boundary curves, the resulting surfaces may have global or local irregularities in many cases. Thus, it would be necessary for the designer to evaluate the surface quality and to modify the surface. This is very important because the defect of the surface causes the rework of the dies, increasing cost and delivery time significantly. To simulate the reflection line test in the actual production line, a faster algorithm for generating reflection lines is presented. In this paper, among various surface interrogation methods using reflection lines, Blinn-Newell type of reflection mapping is applied to generate the reflection lines on the trimmed NURBS surfaces. The derivation of reflection lines is formulated as a surface-plane intersection problem (Jung 1994) and is solved by surface-contouring techniques. Also, for eliminating the discontinuity of reflection lines due to the configuration of reflection map, a modified reflection map is proposed. An efficient traced contouring technique is utilized for the computational efficiency and proves to be well suited for the real-time quality-assessment task.