• 제목/요약/키워드: Surface Generating system

검색결과 160건 처리시간 0.028초

방류수의 수위 및 유량 분석을 통한 해양 소수력 성능평가 (Performance Evaluation of Ocean Small Hydropower Plant by Analyzing Water Level and Flow Rate of Circulating Water)

  • 강금석;김지영;유무성
    • 신재생에너지
    • /
    • 제5권3호
    • /
    • pp.32-39
    • /
    • 2009
  • The Samcheonpo ocean small hydropower plant (SHP) has a special feature of using marginal hydraulic head of circulating water system of fossil fuel power plant as a power source and having the characteristics of general hydropower generation and tidal power generation as well. Also, it contributes to reducing green house gases and developing clean energy source by recycling circulating water energy otherwise dissipated into the ocean. The efficiency of small hydropower plant is directly affected by effective head and flow rate of discharged water. Therefore, the efficiency characteristics of ocean hydropower plant are analyzed with the variation of water level and flow rate of discharged water, which is based on the accumulated operation data of the Samcheonpo hydropower plant. After the start of small hydropower plant operation, definite rise of water level was observed. As a result of flow pattern change from free flow to submerged flow, the instability of water surface in overall open channel is increased but it doesn't reach the extent of overflowing channel or having an effect on circulation system. Performance evaluation result shows that the generating power and efficiency of small hydropower exceeds design requirements in all conditions. Analysis results of CWP's water flow rate verify that the amount of flowing water is measured less and the highest efficiency of small hydropower plant is achieved when the effective head has its maximum value. In conclusion, efficiency curve derived from water flow rate considering tidal level shows the best fitting result with design criteria curve and it is verified that overall efficiency of hydropower system is satisfactory.

  • PDF

A wireless impedance analyzer for automated tomographic mapping of a nanoengineered sensing skin

  • Pyo, Sukhoon;Loh, Kenneth J.;Hou, Tsung-Chin;Jarva, Erik;Lynch, Jerome P.
    • Smart Structures and Systems
    • /
    • 제8권1호
    • /
    • pp.139-155
    • /
    • 2011
  • Polymeric thin-film assemblies whose bulk electrical conductivity and mechanical performance have been enhanced by single-walled carbon nanotubes are proposed for measuring strain and corrosion activity in metallic structural systems. Similar to the dermatological system found in animals, the proposed self-sensing thin-film assembly supports spatial strain and pH sensing via localized changes in electrical conductivity. Specifically, electrical impedance tomography (EIT) is used to create detailed mappings of film conductivity over its complete surface area using electrical measurements taken at the film boundary. While EIT is a powerful means of mapping the sensing skin's spatial response, it requires a data acquisition system capable of taking electrical impedance measurements on a large number of electrodes. A low-cost wireless impedance analyzer is proposed to fully automate EIT data acquisition. The key attribute of the device is a flexible sinusoidal waveform generator capable of generating regulated current signals with frequencies from near-DC to 20 MHz. Furthermore, a multiplexed sensing interface offers 32 addressable channels from which voltage measurements can be made. A wireless interface is included to eliminate the cumbersome wiring often required for data acquisition in a structure. The functionality of the wireless impedance analyzer is illustrated on an experimental setup with the system used for automated acquisition of electrical impedance measurements taken on the boundary of a bio-inspired sensing skin recently proposed for structural health monitoring.

엘리베이터 샤프트를 통한 경보음 전달 예측과 개선 (Prediction and Reduction of Alarm Sound Propagated through Elevator Shaft)

  • 정정호
    • 한국화재소방학회논문지
    • /
    • 제33권4호
    • /
    • pp.89-96
    • /
    • 2019
  • 본 연구에서는 우선경보방식으로 경보음이 발생되는 경우 발화층과 직상층 이외의 다른 층으로도 전달되는 경보음에 대하여 건축음향 시뮬레이션을 활용하여 서로 다른 엘리베이터 배치를 갖는 3가지 조건에 대하여 예측하였다. 엘리베이터 샤프트에 흡음재가 설치되어 있지 않은 현재 조건으로 예측한 경우, 경보 발생층에서 멀어질수록 전달되는 경보음 크기는 작아졌지만, 3개층이 떨어진 경우에도 약 54 dB(A)~56 dB(A) 크기로 전달되어 일반적인 공동주택의 배경소음 보다 크게 전달되는 것으로 예측되었다. 이전 연구에서 개선안으로 제시된 엘리베이터 샤프트에 흡음재를 적용한 결과 인접층으로 전달되는 경보음 레벨은 약 12 dB~16 dB 정도 작아질 수 있는 것으로 예측되었다. 이는 공동주택의 배경소음 레벨과 유사하거나 작은 정도로 국가화재안전기준에서 규정한 일제경보방식의 의도대로 경보음이 발생되는 발화층과 직상층 이외의 층으로 전달되는 현상을 개선할 수 있을 것으로 판단된다.

SHADOW EXTRACTION FROM ASTER IMAGE USING MIXED PIXEL ANALYSIS

  • Kikuchi, Yuki;Takeshi, Miyata;Masataka, Takagi
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
    • /
    • pp.727-731
    • /
    • 2003
  • ASTER image has some advantages for classification such as 15 spectral bands and 15m ${\sim}$ 90m spatial resolution. However, in the classification using general remote sensing image, shadow areas are often classified into water area. It is very difficult to divide shadow and water. Because reflectance characteristics of water is similar to characteristics of shadow. Many land cover items are consisted in one pixel which is 15m spatial resolution. Nowadays, very high resolution satellite image (IKONOS, Quick Bird) and Digital Surface Model (DSM) by air borne laser scanner can also be used. In this study, mixed pixel analysis of ASTER image has carried out using IKONOS image and DSM. For mixed pixel analysis, high accurated geometric correction was required. Image matching method was applied for generating GCP datasets. IKONOS image was rectified by affine transform. After that, one pixel in ASTER image should be compared with corresponded 15×15 pixel in IKONOS image. Then, training dataset were generated for mixed pixel analysis using visual interpretation of IKONOS image. Finally, classification will be carried out based on Linear Mixture Model. Shadow extraction might be succeeded by the classification. The extracted shadow area was validated using shadow image which generated from 1m${\sim}$2m spatial resolution DSM. The result showed 17.2% error was occurred in mixed pixel. It might be limitation of ASTER image for shadow extraction because of 8bit quantization data.

  • PDF

3차원 patched-grid 알고리즘을 이용한 삼각 날개-원통형 동체 형상 전산 해석 (Computational Analysis of the Delta Wing-Cylindrical Body Configuration Using the Three-Dimensional Patched-Grid Algorithm)

  • 박현돈;김영진;박수형
    • 한국항공우주학회지
    • /
    • 제48권2호
    • /
    • pp.109-117
    • /
    • 2020
  • 기존 정렬 격자의 많은 제약 조건들을 완화할 수 있는 patched-grid 알고리즘을 이용하여 효율적으로 정렬 격자계를 구성하였다. EFD-CFD 워크숍의 case 4: 삼각 날개-원통형 동체 형상에 크게 3가지의 접근 방식을 적용하여 기존의 격자 생성 문제점들을 해결하였고, 실험값과 비교하여 검증하였다. 고 받음각 영역에서 표면 압력 분포가 실험값과 다소 차이를 보였다. 마하수의 증가에 따른 피칭 모멘트의 기울기 변화를 분석하였고 이는 tuck under 현상으로 설명할 수 있었다. 초음속 영역에서는 형상 앞에 궁형 충격파가 발생함으로써 삼각익 뒷전까지 양력을 발생시키는 영역이 확장되었다. 또한, 마하수와 받음각에 따라 압력 중심과 무게 중심의 위치를 비교하여 피칭 모멘트의 경향성을 분석하였다.

CT와 MRI 영상을 이용한 간담도계 간접볼륨렌더링 (Indirect Volume Rendering of Hepatobiliary System from CT and MRI Images)

  • 진계환;이태수
    • 한국방사선학회논문지
    • /
    • 제1권2호
    • /
    • pp.23-30
    • /
    • 2007
  • 본 논문에서는 CT(Computed Tomography)와 MRI(Magnetic Resonance Imaging)을 이용하여 획득한 2차원의 복부영상을 영역분할, 문턱치법 등의 전처리과정을 거쳐 3차원영상을 생성하는 방법을 제시함으로써 가상내시경(Virtual Endoscopy)에 응용하고자 한다. 3차원영상 가시화 방법으로는 개인용 컴퓨터에서 이용되는 범용의 그래픽가속기를 이용하여 빠른 속도로 렌더링을 할 수 있는 장점을 가지는 표면볼륨기법을 이용하였다. 여기에 이용한 알고리즘은 계산량이적은 Marching Cubes 이다. 그리고 워크스테션이나 전용의 프로그램이 없더라도 웹 브라우저 상에서 실행되는 가상현실모델링언어(VRML, Virtual Reality Modeling Language)양식의 3차원 영상을 생성하는 방법을 제시한다. CT의 3차원 영상 파일의 노드 수와 삼각형 수 및 크기는 각각 85,367, 174,150, 10,124이었고, MRI의 3차원 영상 파일의 노드 수와 삼각형 수 및 크기는 각각 34,029, 67,824, 3,804이었다.

  • PDF

삼각형상 수중구조물 주위의 유동특성에 관한 연구 (A Study on the Flow Characteristics around Underwater Triangular Structure)

  • 한원희;조대환
    • 해양환경안전학회지
    • /
    • 제14권1호
    • /
    • pp.21-27
    • /
    • 2008
  • 삼각형상 구조물은 바다에서 풍요로운 어장을 만들기 위해 용승류를 발생시키기 위한 인공용승구조물의 기본적인 형태로 이용되고 있다. 인공용승류는 많은 양의 영양염류를 포함하고 있는 저층의 바닷물을 해저로부터 표층으로 끌어 올리는 작용을 한다. 이 연구의 목적은 여러 가지 성층계수에 따른 삼각형상 수중구조물 주위의 유동특성을 규명하는 것이다. 회류수조 내에서 삼각형상 구조물 모델을 대상으로 유동특성을 조사하기 위하여 유동가시화 방법을 이용한 실험적 연구를 수행하였고, 입자영상유속계(PIV)를 이용하여 수중구조물 주위의 유동장을 계측하였다. 실험결과 구조물 후상부 영역에서의 용승효과는 수심이 구조물 높이의 2배이고, 성층계수가 약 3.0일 때 가장 좋은 결과가 나타났다. 이러한 정량적인 데이터는 인공용승구조물의 기능적 효율을 결정하는 데에 유용하게 이용될 수 있을 것이다.

  • PDF

한반도 동남연안지역의 냉수대 영향과 해풍의 상호관련성 연구 (A Study of Interrelationships between the Effect of the Upwelling Cold Water and Sea Breeze in the Southeastern Coast of the Korean Peninsula)

  • 이화운;지효은;이순환
    • 한국대기환경학회지
    • /
    • 제25권6호
    • /
    • pp.481-492
    • /
    • 2009
  • The characteristic of cold water by upwelling in the southeast of the Korean Peninsula and the effect of sea breeze in this region are investigated. The coastal upwelling around the southeast coast of the Korea Peninsula is analyzed by using Coastal Oceanographic Data statistical analyses for 5 years were carried out. The period of an cold water event, on the average, was observed southwesterly wind events. The analysis suggests that strong and persistent southwesterly winds in period of an cold water play an important role of bring the moisture to the surface, generating persistent cyclone as jangma. In order to investigate the effect of cold water on sea breeze, we considered two case. First, Exp. 1 is not occurred coastal upwelling on sea breeze. Second, Exp. 2 is occurred cold water on sea breeze. Two experiments were completed separately to the effects of cold water by upwelling. The results show the sea breeze is stronger in Exp. 2, when the cold water occurs, and weaker in Exp. 1, when there is no cold water. In order to verify the effect of the sea breeze on the cold water by upwelling, on the intensification and change of direction of the prevailing wind, the sea breeze effectively intensify cold water condition.

인공위성 레이더 간섭기술을 이용한 조간대 지형도 작성에 관한 연구 (Intertidal DEM Generation Using Satellite Radar Interferometry)

  • 박정원;최정현;이윤경;원중선
    • 대한원격탐사학회지
    • /
    • 제28권1호
    • /
    • pp.121-128
    • /
    • 2012
  • 조간대 지역의 고해상 지형도는 해수 운동에 의한 퇴적 및 침식량의 변화와 같이 과학적인 연구의 기초자료로 쓰일 뿐만 아니라 연안 습지의 실제적인 관리 및 환경변화 모니터링의 도구로서도 그 활용의 가치가 높다. 그러나 조간대는 하상 퇴적물의 유입과 조석현상에 의해 빠르게 변화하고 있어 원격탐사와 같이 단기간에 넓은 지역을 조사할 수 있는 기술의 적용이 필요하다. 레이더 간섭기술은 가장 보편적이면서 성공적인 고해상 지형도 작성 기술로 알려져 있으나, 조간대에서는 지표노출시간의 제약 및 빠른 상태변화로 인해 일반적인 repeat-pass 간섭기술로는 충분한 긴밀도를 얻기 힘들다. 이 연구에서는 재방문주기가 짧은 Cosmo-SkyMed 1일 간격 관측자료와 ERS2-ENVISAT 30분 간격 관측자료를 이용하여 레이더 간섭기술을 이용한 조간대 지형도 작성을 실험하였다. 두 자료 모두 긴 수직기선으로 인한 높은 고도민감도와 짧은 관측주기로 인한 높은 긴밀도로 간섭위상을 구할 수 있었으나, Cosmo-SkyMed 관측자료에서는 대기에 의한 위상지연 효과와 조석에 의한 조간대 표층의 함수율 변화로 인하여 조간대와 같이 평평한 지역의 지형정보를 추출하는데에 어려움이 발생한다. 반면에 ERS2-ENVISAT 관측자료는 이종센서간의 관측중심주파수 차이를 상쇄하기 위해 설정된 긴 수직기선 덕분에 매우 높은 고도민감도를 가지며, 30분이라는 짧은 관측주기는 간섭쌍을 이루는 두 영상에 포함된 대기지연효과를 대부분 상쇄시키므로 조간대의 지형도 작성에 이상적인 자료로 판단된다.

피부 화상으로 유도된 간 손상에서 Allopurinol의 효과 (Allopurinol Decreases Liver Damage Induced by Dermal Scald Burn Injury)

  • 조현국;윤종국;박원학
    • Applied Microscopy
    • /
    • 제31권1호
    • /
    • pp.37-47
    • /
    • 2001
  • 화상에 의한 피부 손상이 간에 미치는 영향을 알아보기 위하여 흰쥐를 이용하여 피부 화상을 유도한 다음 각각 5시간, 24시간 후 생화학적 정량법과 형태학적 관찰을 통해 간 조직 손상의 발병기전을 검토해 보고자 하였다. 흰쥐의 화상 유발은 등쪽면의 털을 깎고(total burn surface area $20\sim25%$) $100^{\circ}C$ 물로 10초간 흡입손상 없이 피부 화상만을 가하였다. 생화학적 정량으로는 혈청 내 xanthine oxidase(XO)와 aniline aminotransferase (ALT)의 활성변화, 그리고 혈장 단백질 함량 변화를 측정하였고, 형태학적 관찰은 혈액 중 다형핵 백혈구 수의 산정과 간 세포의 미세구조 변화를 관찰하였다. 실험 결과, 화상 후 혈청 내 XO의 활성 증가(P<0.01)와 함께 체중 당 간 무게(p<0.05)와 혈청 내 ALT의 활성이 증가되었다. 화상 직후 allopurinol의 복강투여로 XO활성, 간 무게, 그리고 ALT의 활성은 모두 감소되었다. 화상 손상에 의한 간 조직의 미세구조적 변화로는 소포체 종창, 리보솜 탈락, 지방소적의 축적, 그리고 담모세관과 세포간질의 확장이 관찰되었다. 뿐만 아니라 염증세포인 호중구의 침윤과 함께 혈관 내피세포의 손상, 쿠퍼세포의 활성화, 그리고 미세융모의 손상들이 관찰되었다. 또한 혈 중 다형핵 백혈구의 수적인 변화에서 화상 유발 5시간 후에 현저히 감소되어 내부 장기에 호중구 침윤의 가능성을 알 수 있었다. 하지만 allopurinol의 투여로 이러한 미세구조의 변화를 예방할 수 있는 것으로 나타났다. 이러한 결과들을 종합해 볼 때, 피부 화상으로부터 간 손상을 유발하는데 있어서 혈 중 XO의 활성증가가 매우 핵심적인 역할을 담당하는 것으로 사료되었다.

  • PDF