• 한국결정성장학회지
• /
• 제11권6호
• /
• pp.264-268
• /
• 2001

표면계의 분배함수를 적절히 계산하여 유도하였다. 흡착등온식을 유도하였다. 유도된 흡작등온식의 분석을 통하여 표면상변이 현상은 흡착분자간에 강한 인력이 존재할 때 일어나는 것임을 보였다. 얻어진 이론적 결과는 실험 사실을 잘 설명한다는 것을 알수 있었다.

• Geomechanics and Engineering
• /
• 제30권4호
• /
• pp.325-336
• /
• 2022

This paper analyzes the ground surface settlements induced by side-by-side twin shield tunnels bored in sedimentary soils, which primarily consist of sand with clay strata above the tunnel crown. The measurements were obtained during the construction of twin tunnels underneath the Incheon International Airport (IIA) located in Korea. The measured surface settlement troughs are approximated with Gaussian functions. The trough width parameters i and K of the settlement troughs produced by the first and second tunnel passings are determined, along with those for the total settlement trough. The surface settlement troughs produced by the first shield passing are reasonably represented by a symmetric Gaussian curve. The surface settlement troughs induced by the second shield tunnel display marginal asymmetric shapes at selected sections. The total settlement troughs are fitted both with a shifted symmetric Gaussian function and the superposition method utilizing an asymmetric function for the incremental trough produced by the second tunnel. It is revealed that the superposition method does not always produce better fits with the total settlement. Instead, the shifted symmetric Gaussian function is overall demonstrated to provide more favorable agreements with the recordings. Therefore, the shifted symmetric Gaussian function is recommended to be used in the design for the prediction of the settlement in clays caused by twin tunneling considering the simplicity of the procedure compared with the superposition method. The amount of increase in the width parameter K for the twin tunnel relative to that for the single tunnel is quantified, which can be used for a preliminary estimate of the surface settlement in clay induced by twin shield tunnels.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1999년도 제30회 추계학술대회
• /
• pp.136-145
• /
• 1999

This paper describes the surface roughness effect in parallel thrust bearing. In mixed lubrication, some contacts will take place between asperities, and partial lubrication will occur. An average Reynolds Equation is utilized to determine effects of surface roughness on partially lubricated contacts. By using an autocorrelation function for the surface profile, surface model is generated numerically Although the two surfaces are parallel in thrust bearing separated by thin film, the pressure peak is formed due to asperites. By means of surface profile parameters, it is shown that which surface is optimal for the parallel thrust bearing.

• 전자공학회논문지
• /
• 제52권7호
• /
• pp.127-134
• /
• 2015

본 연구에서는 다입출력 불확실 선형 플랜트를 위한 포화함수에 의한 연속 슬라이딩 면 변환 가변 구조 시스템이 주어진다. 이론적으로 불연속 슬라이딩 면 변환 가변구조 시스템을 제안한다. 사전에 결정된 슬라이딩 면 위에 슬라이딩 모드의 다입출력 존재 조건과 함께 페루프 지수 안정성에 대해 검토한다. 실제 응용을 위하여 포화 함수에 의하여 불연속 가변구조 시스템의 연속 근사화를 이룬다. 실제적인 관점에서 가변 구조 시스템의 내부 특성인 제어입력의 불연속성을 많이 개선한다, 설계 예와 시뮬레이션 연구를 통하여 제안된 연속 변환 가변구조 시스템 제어기의 유용성을 입증한다.

• 대한기계학회논문집A
• /
• 제25권10호
• /
• pp.1659-1670
• /
• 2001

It has been reported that cracks at mechanical fastener holes usually nucleate as elliptical corner cracks at the faying surface of the mechanical joints and grow as elliptical arc through cracks after penetrating the opposite surface. The weight function method is an efficient technique to calculate the stress intensity factors fur elliptical cracks using uncracked stress field. In this study the weight function method for three dimensional mixed-mode problem applied to elliptical comer cracks Is modified for elliptical arc through cracks and the stress intensity factors at two surface points of elliptical arc through cracks at mechanical fastener holes are analyzed by the weight function method. This study consists of two parts and in part I , the weight function method for elliptical arc through cracks is developed and verified.

• Tribology and Lubricants
• /
• 제16권2호
• /
• pp.106-113
• /
• 2000

Effects of surface roughness on bearing performances are investigated numerically in this study, especially for the parallel thrust bearing. Although mating surfaces are parallel and separated by thin fluid film, the pressure distribution is formed due to asperities. Model surface is generated numerically with given autocorrelation function and some surface profile parameters. Then the average Reynolds equation is applied to predict the effects of surface roughness between hydrodynamic and mixed lubrication regimes. In this equation, flow factors are defined as correction terms to smooth out high frequency surface roughness. The correlation length is proposed to get the minimum load for the parallel thrust bearing for various sliding conditions.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.444-449
• /
• 1996

The semiconductor, which is precision product, requires many inspection processes. The surface conditions of the semiconductor chip affect on the functions of the semiconductors. The defects of the chip surface are cracks or voids. As general inspection method requires many inspection procedure, the inspection system which searches immediately and precisely the defects of the semiconductor chip surface is required. We suggest the detection algorithm for inspecting the surface defects of the semiconductor surface. The proposed algorithm first regards the semiconductor surface as random texture and point spread function, and secondly presents the character of texture by linear estimation theorem. This paper assumes that the gray level of each pixel of an image is estimated from a weighted sum of gray levels of its neighbor pixels by linear estimation theorem. The weight coefficients are determined so that the mean square error is minimized. The obtained estimation window(two-dimensional estimation window) characterizes the surface texture of semiconductor and is used to discriminate the defects of semiconductor surface.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.63-63
• /
• 2010

Using both experimental and theoretical approaches, we have investigated the adsorption properties of an organic molecule (HATCN), which is used in OLEDs as an efficient hole injection layer, on metal and inert surfaces. We have also studied the structural and electronic properties of such interfaces and the dependences on deposition thickness. We have observed different trends in work function changes with different surfaces. Our photoelectron spectroscopic measurements have revealed an abnormal phenomenon in HATCN on a metal (Cu) surface: the work function decreases at lower coverage (~monolayer) of HATCN on a metal (Cu) surface, but it increases back and becomes higher than that of a bare Cu surface at higher coverage. It has, on the contrary, been observed that the work function of graphene surface just increases as the HATCN coverage increases. Our first-principles density functional calculations has not only verified our experimental observations, but also disclosed the underlying mechanism of such abnormal and different work function behaviors. We have found that the change in work function results from mutual polarization induced by the geometrical deformation and the bond dipole formed at the interface due to the charge redistribution. At low coverage of HAT-CN on Cu substrate, the former reduces the work function significantly by pulling down the vacuum level, while the latter tends to push up the vacuum level resulting in the work function increase.

• 대한물리의학회지
• /
• 제17권2호
• /
• pp.75-82
• /
• 2022

PURPOSE: This study examined the correlation between the pulmonary function and respiratory muscle strengthening training on an unstable support surface and a stable support surface in stroke patients. METHODS: The study subjects were 22 stroke patients undergoing central nervous system developmental rehabilitation treatment. After excluding six dropouts, eight people in the experimental group and eight people in the control groups were classified by random sampling. Both groups performed central nervous system developmental rehabilitation therapy and were provided a 10-minute break. The experimental group was provided with an unstable support surface using Togu, and the control group was trained to strengthen the respiratory muscle in a stable support surface. Respiratory muscle strengthening training was conducted three times per week for 20 minutes. Before and after each group of experiments, a nonparametric test Wilcoxon signed rank test, and a Mann Whitney U-test analysis were used to analyze the variations between the two groups. All statistical significance levels (α) were set at 0.05. RESULTS: Both groups showed increases in the pulmonary function but showed significant differences only in the experimental group. There was a significant difference in the peak expiratory flow between the two groups. CONCLUSION: Central nervous system development rehabilitation treatment for patients with an impaired nervous system and respiratory muscle strengthening training on unstable support surfaces are effective in improving the pulmonary function of stroke patients. Therefore, they are expected to be applied to physical therapy programs to help various functional activities.

• 터널과지하공간
• /
• 제10권1호
• /
• pp.33-44
• /
• 2000

이 연구에서는 지하공동의 점진적인 붕락이 지표침하에 미치는 영향을 조사하기 위하여, 주문진산 표준사를 이용하여 모형지반을 구성하였으며, 공동의 심도를 달리하는 6가지 모델에 대하여 실내 모형실험을실시하였다. 여기서 공동의 심도와 붕락구간의 크기에 따른 침하발생양상을 조사하였다. 또한 NCB 방법, 지수함수를 이용한 윤곽함수법 영향함수법 등의 침하예측방법을 이용하여 모형실험으로부터 측정된 수직 및 수평변위를 해석하였으며, 모래지반에 적합한 침하예측방법을 제안하였다.