• 한국측량학회지
• /
• 제27권5호
• /
• pp.619-628
• /
• 2009

LiDAR는 광범위한 지역의 지형 지물 및 지표면에 대한 3차원 좌표를 신속하게 획득할 수 있는 장비로 고정밀의 3차원 공간데이터를 제공하는 장점이 있다. 그러나 LiDAR 데이터는 불규칙한 3차원 점 데이터로 구성되어 있으므로, 의미적이고 시각적인 정보를 제공하지 않으며, LiDAR 데이터만을 사용하여 정보를 추출하는 것은 어렵다. 본 연구에서는 항공 LiDAR 데이터로부터 건물의 외곽선 자동 추출 및 3차원 상세 모델링을 위한 방법을 제안하였다. 전처리 과정으로 반복적 평면 fiitting을 통하여 노이즈 및 불필요한 데이터를 제거하고, 히스토그램 분석을 수행하여 지면과 비지면 데이터를 효과적으로 분리하였다. 건물 외곽선을 추출하기 위해서 객체추적 기법을 이용하여 건물의 외곽에 해당하는 LiDAR 점들을 분류하였으며, 선행과정을 통해 LiDAR 데이터로부터 최종적으로 건물의 외곽선을 추출하였다. 정확도 검증을 위해 추출된 건물의 외곽선을 1:1,000 수치지도와 비교한 결과, 실험지역의 평면 RMSE가 약 0.56m였다. 또한, 건물의 상부구조물의 형태를 재현하기 위한 특성정보 추출 방법을 제안하였다. 지붕면을 세부적으로 분할하고 모델링하기 위하여 통계적 및 기하적 특성정보를 이용하였으며, 각각의 상부구조물에 적합한 수학적 함수를 최소제곱법에 의해 결정함으로써 3차원 모델링이 가능하도록 하였다. 상부구조물 모델링 결과 각 형태에 따른 RMSE가 사각형 상부구조물은 0.91m, 삼각형 상부구조물은 1.43m, 아치형 상부구조물은 1.85m, 돔형 상부구조물이 1.97m였다. 이는 원시 LiDAR 데이터로부터 지붕면 분할 및 3차원 자동 모델링이 효과적으로 수행되었음을 보여주고 있다.

• Wind and Structures
• /
• 제30권4호
• /
• pp.433-450
• /
• 2020

The strong turbulence characteristic of typhoon not only will significantly change flow field characteristics surrounding the large-scale wind turbine and aerodynamic force distribution on surface, but also may cause morphological evolution of coast dune and thereby form sand storms. A 5MW horizontal-axis wind turbine in a wind power plant of southeastern coastal areas in China was chosen to investigate the distribution law of additional loads caused by wind-sand coupling movement of coast dune at landing of strong typhoons. Firstly, a mesoscale Weather Research and Forecasting (WRF) mode was introduced in for high spatial resolution simulation of typhoon "Megi". Wind speed profile on the boundary layer of typhoon was gained through fitting based on nonlinear least squares and then it was integrated into the user-defined function (UDF) as an entry condition of small-scaled CFD numerical simulation. On this basis, a synchronous iterative modeling of wind field and sand particle combination was carried out by using a continuous phase and discrete phase. Influencing laws of typhoon and normal wind on moving characteristics of sand particles, equivalent pressure distribution mode of structural surface and characteristics of lift resistance coefficient were compared. Results demonstrated that: Compared with normal wind, mesoscale typhoon intensifies the 3D aerodynamic distribution mode on structural surface of wind turbine significantly. Different from wind loads, sand loads mainly impact on 30° ranges at two sides of the lower windward region on the tower. The ratio between sand loads and wind load reaches 3.937% and the maximum sand pressure coefficient is 0.09. The coupling impact effect of strong typhoon and large sand particles is more significant, in which the resistance coefficient of tower is increased by 9.80% to the maximum extent. The maximum resistance coefficient in typhoon field is 13.79% higher than that in the normal wind field.

• IUGG한국위원회:학술대회논문집
• /
• IUGG한국위원회 2003년도 정기총회 및 학술발표회
• /
• pp.20-20
• /
• 2003

In the summers of 1997 and 1998 and in February of 2000 we made 570 measurements of the ambient geomagnetic field 120 cm above the pavement surface of State Route 130, south of Pahoa, the island of Hawaii using a three-component fluxgate magnetometer. We measured at every 15.2 m (50 feet) interval covering a distance of 6, 310 m (20, 704 ft) where both historic and pre-historic highly magnetic basalt flows underlie. We also collected 197 core samples from eight road cuts, 489 specimens of which were subject to AF demagnetizations at 5 - 10 mT level up to a maximum field of 60 mT. We observed significant inclination anomalies ranging from a minimum of $31^{\circ}$ to a maximum $40^{\circ}$ where a uniform inclination value of $36.7^{\circ}$ (International Geomagnetic Reference Field, IGRF) was expected. Since the mean of the observed inclinations is approximately $35^{\circ}$ we assume that the study area is slightly affected by the magnetic terrain effect to a systematically shallower inclinations for being located in the regionally sloping surface of the southern side of the island (Baag, et al., 1995). We observed inclination anomalies showing wider (spacial) wavelength (160 - 600 m) and higher amplitudes in the historic lava flows area than in the northern pre-historic flows. Our observations imply that preexisting inclination anomalies such as those that we observed would have been interpreted as paleosecular variation (PSV). These inclination anomalies can best be attributed to concealed underground highly magnetic dikes, channel type lava flows, on-and-off hydrothermal activities through fissure-like openings, etc. Both the within- and between-site dispersions of natural remanent magnetization (NRM) are largest (up to ${\pm}7^{\circ}$) above the flows of 1955, while the area of pre-historic flows in the northern part of the study area exhibit the smallest dispersion. Nevertheless, mean inclinations of each historic flow of 1955 and 1790 are almost identical to that of the corresponding present field, whereas mean of NRM (after AF demagnetization) inclinations for each of the four pre-historic lava flow units is twelve to thirteen degrees lower than the present field inclination. We observed three cases of very large inclination variations from within a single flow, the best fitting curves of which are linear, second and third order polynomials each from within a single flow, whereas no present field variations are observed. This phenomena can be attributed to the notion that local magnetic anomalies on the surface of an active volcano are not permanent, but are transient. Therefore we believe that local magnetic anomalies of an active volcano may be constantly modified due to on going subsurface injections and circulations of hot material and also due to wide spacial and temporal distribution of highly magnetic basaltic flows that will constantly modify the topography which will in turn modify the local ambient geomagnetic field (Baag, et al., 1995). Our observations bring into question the general reliability of PSV data inferred from volcanic rocks, because on-going various geologic and geophysical activities associated with active volcano would continuously deflect and modify the ambient geomagnetic field.

• 한국정보과학회논문지:시스템및이론
• /
• 제29권6호
• /
• pp.307-317
• /
• 2002

본 논문은 연결정보가 없는 3차원 점으로부터 차이분할메쉬를 직접 생성하는 새로운 메쉬 복원 알고리즘을 제안한다. 차이분할메쉬는 표현해야 하는 각 정점을 1차원 상수 차이 값으로 표현하는 메쉬로써 저장해야하는 데이타양을 획기적으로 줄이면서 분할메쉬의 장점인 분할연결성을 가지므로 다단계 표현이 가능한 새로운 메쉬 표현법이지만 차이분할메쉬를 생성하는 기존의 방법은 레인지 데이타로부터 복원된 비정형 메쉬로부터 차이분할메쉬로의 변환을 거쳐야 하는 문제점이 있다. 제안 알고리즘은 비정형 메쉬로부터의 메쉬 변환과정이 필요 없이 연결정보가 없는 레인지 데이타로부터 차이값에 기반한 분할메쉬를 매쉬 복원과정에서 직접 생성해 낼 수 있다. 기본 아이디어는 연결정보가 없는 점 데이타만을 이용하여 이에 근사한 파라메트릭 도메인을 생성한 후 도메인 상의 각 정점의 법선 벡터 방향으로 세부 표면 정보를 샘플링 하는 것이다. 이를 위하여 우리는 분할곡면 근사기법을 적용한 파라매트릭 도메인 생성기법을 적용하여 입력 점 데이타에 최대한 근사하는 기본메쉬를 생성하며, 연결정보가 없는 점 데이타로부터 세부 표면정보를 올바르게 샘플링 하기 위한 법선벡터와 교차하는 유효한 삼각형 판정기준을 제시한다. 또한 기존 메쉬 복원 기법에서 사용되던 전역 에너지 최적화 방법 대신 입력 데이타를 고려한 지역적 라플라시안 평활화를 이용하여 고품질의 메쉬를 빠르게 복원할 수 있다. 이렇게 복원된 차이분할메쉬는 적은 데이터로 자세한 표현이 가능해져 메쉬 간략화나 압축 등의 후처리 과정이 필요 없으며. 분할연결성을 이용한 다단계 애니메이션등의 다양한 응용분야에 활용 가능하다.6으로 남녀학생 모두 총 열량에 대한 지질의 섭취비율이 높았다. 인, 비타민 B$_1$, B$_{6}$, E를 제외한 칼슘, 철, 아연, 비타민 A, B$_2$, C, 나이아신, 엽산 등 대부분의 미량 영양소 섭취량은 권장량에 미치지 못하였다. 혈청 COT, GPT는 남학생이 여학생보다 각 항목에서 유의하게 높았고, 혈청 총 콜레스테롤, 중성지질, HDL-콜레스테롤, LDL-콜레스테롤은 남녀학생 간에 유의한 차이가 없었다. 적혈구지수의 경우 적혈구수, 헤모글로빈, 헤마토크릿, MCHC가 남학생이 여학생보다 유의하게 높았다. 체중, 체질량지수, 비만지수는 모두 수축기 혈압과 유의한 정의 상관관계를 보였고(p<0.01, p<0.05, p<0.05), 체지방률은 영양지식과 유의한 부의 상관관계를 보였다(p<0.05). 비만도와 영양소 섭취량과의 관계에서 체중, 체질량지수, 비만지수는 콜레스테롤 섭취량과(p<0.01, p<0.05, p<0.05) 각각 유의한 정의 상관관계를 보였다. 비만도와 혈액성상과의 관계에서 체중은HDL-콜레스테롤과 유의한 부의 상관관계를(p<0.05), 적혈구수, 헤모글로빈, 헤마토크릿과는 유의한 정의 상관관계를(각 p<0.05) 보였다. 체질량지수와 비만지수는 각각 HDL-콜레스테롤과는 부의 (각 P<0.05), 적혈구수와는 정의(각 p<0.05) 상관관계를 보였다. 허리엉덩이둘레비는 혈청 GPT, glucose, MCV와 각각 유의한 정의 상관관계를 보였다(각 p<0.05). 이상의 연구결과를 종합할 때 남녀 비만 중학생 모두 총 열량 섭취량 중 지질로

• 신재생에너지
• /
• 제5권3호
• /
• pp.32-39
• /
• 2009

The Samcheonpo ocean small hydropower plant (SHP) has a special feature of using marginal hydraulic head of circulating water system of fossil fuel power plant as a power source and having the characteristics of general hydropower generation and tidal power generation as well. Also, it contributes to reducing green house gases and developing clean energy source by recycling circulating water energy otherwise dissipated into the ocean. The efficiency of small hydropower plant is directly affected by effective head and flow rate of discharged water. Therefore, the efficiency characteristics of ocean hydropower plant are analyzed with the variation of water level and flow rate of discharged water, which is based on the accumulated operation data of the Samcheonpo hydropower plant. After the start of small hydropower plant operation, definite rise of water level was observed. As a result of flow pattern change from free flow to submerged flow, the instability of water surface in overall open channel is increased but it doesn't reach the extent of overflowing channel or having an effect on circulation system. Performance evaluation result shows that the generating power and efficiency of small hydropower exceeds design requirements in all conditions. Analysis results of CWP's water flow rate verify that the amount of flowing water is measured less and the highest efficiency of small hydropower plant is achieved when the effective head has its maximum value. In conclusion, efficiency curve derived from water flow rate considering tidal level shows the best fitting result with design criteria curve and it is verified that overall efficiency of hydropower system is satisfactory.

• The Journal of Advanced Prosthodontics
• /
• 제2권3호
• /
• pp.102-105
• /
• 2010

PURPOSE. The aims of this study were to suggest a method of fabrication of the record base using a light-polymerized resin by applying the two-phase fabrication method for the improvement of the fit of the record base and to compare the degree of fit according to the separation site. MATERIALS AND METHODS. In the edentulous cast of maxilla, four test groups were considered. In the first, second, third, and fourth test groups (n = 12 in each group) the separation was done at 0, 5, 10, and 15 mm, respectively below the alveolar crest along the palatal plane. For the control group, the record base was made without separating the two sections. The light-body silicone material was injected into the fitting surface of the record base. It was then placed onto the cast and finger pressure was applied to stabilize it in a seated position followed by immediate placement onto the universal test device. Finally, the mass of the impression material was measured after it was removed. ANOVA was performed using the SAS program. For the post-hoc test, the Wilcoxon Rank-Sum test and the Tukey-Kramer HSD test were performed ($\alpha$ = 0.05). RESULTS. The control group and Group 3, 4 showed significant differences. The Group 3 and 4 showed significantly smaller inside gaps than the control group which was not made with the two-phase fabrication method. CONCLUSION. The two-stage polymerized technique can improve the fit of the denture base particularly when the separation was made at 10 to 15 mm from the alveolar crest.

• 패션비즈니스
• /
• 제20권3호
• /
• pp.17-29
• /
• 2016

To develop baseball catcher leg guards, 3-dimensional (3D) methodologies, which are 3D human body data, reverse engineering, modeling, and printing, optimized guard design for representative positions. Optimization was based on analysis of 3D body surface data and subjective evaluation using 3D printing products. Reverse engineering was used for analysis and modeling based on data in three postures: standing, $90^{\circ}$ knee flexion, and $120^{\circ}$ knee flexion. During knee flexion, vertical skin length increased, with the thigh and knee larger in anterior area compared to the horizontal dimension. Moreover, $120^{\circ}$ knee flexion posture had a high radius of curvature in knee movement. Therefore, guard designs were based on increasing rates of skin deformation and numerical values of radius of curvature. Guards were designed with 3-part zoning at the thigh, knee, and shin. Guards 1 and 2 had thigh and knee boundaries allowing vertical skin length deformation because the shape of thigh and knee significantly affects to its performance. Guard 2 was designed with a narrower thigh and wider knee area than guard 1. The guards were manufactured as full-scale products on a 3D printer. Both guards fit better in sitting than standing position, and guard 2 received better evaluations than guard 1. Additional modifications were made and an optimized version (guard 3) was tested. Guard 3 showed the best fit. A design approach based on 3D data effectively determines best fitting leg guards, and 3D printing technology can customize guard design through immediate feedback from a customer.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.1181-1181
• /
• 2001

Robinson with ${coworkers}^{1}$ have introduced two-state outer-neighbor bonding model to explain the anomalies of water. The studies on the properties of water as a function of temperature and pressure revealed that, unlike other ideas, all $H_2O$ molecules in liquid are tetrabonded. On the average they are forming two different bonding types. One type is the regular tetrahedral water-water bonding similar to that found in the ordinary ice Ih, whereas the other is a more dense nonregular tetrahedral bonding similar to that appearing in the ice II. The transformation between these two bonding forms is evidenced by FT-NIR experiment. The FT-NIR measurements were done for liquid water in the temperature range from $20^{\circ}C$ up to $80^{\circ}C$ in a wide extent of frequencies: 12 000 - 4000 $cm^{-1}$ /. Temperature dependent variations in the volume fraction of these two structures are directly related to the spectral changes. The absorbance variations are explored by means of the two-dimensional correlation spectroscopy (2DCOS), principal component analysis (PCA), curve fitting and second derivatives. The presence of the isosbestic points in a range of the combination and overtone transitions indicates that the experimental spectra are a superposition of two temperature independent components. One component of diminishing intensity with temperature increase, is assigned to a stronger hydrogen bonds occurred in the Ih type, whereas the second component showing an opposite behavior, one can attribute to a weaker H-bonds characteristic for the II type. The understanding of the hydrogen bonding network in the liquid water is very important in interpretation of the interaction between water and protein chain. The two-state model of water surrounding the protein surface could advance an understanding of the hydration process.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제10권3호
• /
• pp.203-212
• /
• 2010

In this paper, we present an analytical model for the first eigen energy level ($E_0$) of the carriers in the inversion layer in present generation MOSFETs, having ultrathin gate oxides and high substrate doping concentrations. Commonly used approaches to evaluate $E_0$ make either or both of the following two assumptions: one is that the barrier height at the oxide-semiconductor interface is infinite (with the consequence that the wave function at this interface is forced to zero), while the other is the triangular potential well approximation within the semiconductor (resulting in a constant electric field throughout the semiconductor, equal to the surface electric field). Obviously, both these assumptions are wrong, however, in order to correctly account for these two effects, one needs to solve Schrodinger and Poisson equations simultaneously, with the approach turning numerical and computationally intensive. In this work, we have derived a closed-form analytical expression for $E_0$, with due considerations for both the assumptions mentioned above. In order to account for the finite barrier height at the oxide-semiconductor interface, we have used the asymptotic approximations of the Airy function integrals to find the wave functions at the oxide and the semiconductor. Then, by applying the boundary condition at the oxide-semiconductor interface, we developed the model for $E_0$. With regard to the second assumption, we proposed the inclusion of a fitting parameter in the wellknown effective electric field model. The results matched very well with those obtained from Li's model. Another unique contribution of this work is to explicitly account for the finite oxide-semiconductor barrier height, which none of the reported works considered.

• 한국전산구조공학회논문집
• /
• 제17권1호
• /
• pp.31-38
• /
• 2004

기계부품의 설계는 초기 설계, 해석, 성능 평가의 반복 과정을 통하여 수행된다. 설계자는 각 과정에서 특성에 맞는 프로그램을 사용하고 있다. 본 연구에서는 순차 설계 영역을 이용한 형상최적화를 수행하였다. 순차 설계영역의 근사함수를 구하기 위하여 Pro/Engineer 와 ANSYS 실행의 자동화를 수행하였다. 전체 설계영역을 근사식으로 표현하기에는 어려움이 있다. 정확도가 높은 근사식을 만들기 위하여 순차설계영역을 설정하여 각 단계에서 수렴한 해로 이동량을 결정하고, 두 번 연속하여 순차설계 영역에 존재하면 수렴조건을 만족하는 것으로 하였다. 각 단계의 해는 순차이차 계획법인 PLBA(Pshenichny-Lim-Belegundu Arora)알고리즘을 이용하여 구하였다.