• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.1
• /
• pp.106-113
• /
• 2013

One of feasible non-destructivity test methods for evaluation of concrete permeability is the measurement of surface resistivity. But the application to steel fiber-reinforced concrete has been limited because mis-evaluation could be caused by the steel fibers in concrete. In this study, the effect of fiber distribution on surface electrical resistivity of steel fiber-reinforced concrete was investigated through experimental program. Resistivity was measured three times on four surfaces in three rectangular and circular specimens with 0.5%, 1% and 1.5% steel fibers by volume and compared each other. The results obtained from circular specimens were consistent compared to those from rectangular specimens. And the results demonstrated that the effect of fiber distribution on surface resistivity was not significant compared to that of mixing ratio of steel fibers. In conclusion, this non-destructive testing method using measurement of surface resistivity could be used for SFRC within 0.5% steel fibers by volume.

• Carbon letters
• /
• v.1 no.1
• /
• pp.6-11
• /
• 2000

Coal tar pitch was chemically modified with 10 wt% benzoquinone (BQ) to raise the softening point of isotropic pitch precursor and the precursor was melt-spun into pitch fibers, stabilized, carbonized and activated with steam at $900^{\circ}C$. The weight loss of carbon fiber-benzoquinone (CF-BQ) increased with the increase of activation time like other fibers, but was lower than those of Kureha fiber at the same activation time in spite of larger geometric surface area. Those adsorption isotherms fitted into 'Type I' according to Brunauer, Deming, Deming and Teller classification. However, there was very thin low-pressure hysteresis that lower closure points of the hysteresis are about 0.42-0.45. From the pore size distribution curves, there might be some micropores having narrow-necked bottle; a series of interconnected pore is more likely than discrete bottles. FT-IR studies showed that the functional groups such as carboxyl, quinone, and phenol were introduced to ACFs-BQ surface after steam activation. Methylene blue decolorization and iodine adsorption capacity of ACF-BQ increased linearly with the increase of specific surface area and was larger than that of ACF-Kureha at the same specific surface area.

• Macromolecular Research
• /
• v.15 no.5
• /
• pp.424-429
• /
• 2007

A procedure for the surface hydrolysis of an electrospun poly(${\epsilon}$-caprolactone) (PCL) fibrous scaffold was developed to enhance the adhesion and proliferation of osteoblasts. The surface hydrolysis of fibrous scaffolds was performed using NaOH treatment for the formation of carboxyl groups on the fiber surfaces. The hydrolysis process did not induce deformation of the fibers, and the fibers retained their diameter. The cell seeding density on the NaOH-treated PCL fibrous scaffolds was more pronounced than on the non-treated PCL fibers used as a control. The alkaline phosphatase activity, osteocalcin and a mineralization assay strongly supported that the surface-hydrolyzed PCL fibrous scaffolds provided more favorable environments for the proliferation and functions of osteoblasts compared to the non-treated PCL fibrous scaffolds use as a control.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.35 no.4
• /
• pp.8-16
• /
• 2003

The objective of this study was to investigate the potential application of the separated refining system in the papermaking process using cotton pulps. The cotton staple and linter fibers were expected to show a great difference in their refining responses due to their morphological and physical differences. Experiments were conducted to examine the differences in flocculation tendency, CED viscosity, fiber length, handsheet properties and the SEM surface images between staple and linter fibers at a given refining degree. These fibers were also subjected to separated refining in a laboratory-scale beater and in a mill-scale refiner as well. The effect of the separated refining on the refining rates and papermaking properties were evaluated. Results obtained are summarized as follows: 1. Fiber flocculation tendency of cotton staple was estimated to be significantly greater than that of linter fibers; 2. The staple fibers showed higher cellulose DP, longer fiber length and higher sheet strength at a given refining degree compared to linter fibers, but remarkably slower refining rate was observed; 3. The separated refining system exhibited a significant increase in sheet strengths, especiauy in folding endurance, with an increase in the fibrillation on the surface of staple fibers, but slightly lower or comparable fiber length after refining to the mixed refining system; 4. Similar results were also obtained from the machine trial in which about 7-8％ energy saving effects were achived in the separated refining system. On the basis of the results observed in this study, it was concluded that a significant increase in paper strength and a substantial reduction in refining energy consumption could be achieved using the separated refining system for the cotton staple and linter fiber stock refining.

• Journal of The Korean Society of Integrative Medicine
• /
• v.7 no.2
• /
• pp.121-131
• /
• 2019

Purpose : Lower back pain is a common disorder experienced by approximately 90-% of the population at least once in a lifetime. This study examines changes in the thicknesses and ratios of the deep and superficial fibers of the multifidus according to the lumbar stabilization exercise used for spinal stabilization. Methods : Ten different lumbar stabilization exercises were implemented by 20 healthy men in random order, and the thickness of multifidus muscle was measured ultrasound image during each exercise. Results : The surface muscle fibers of the multifidus muscles significantly increased in the exercise method in which the arms and legs were lifted (p<.05), while the deep muscle fibers of the multifidus muscles increased significantly in the exercise in which the arms and legs were not lifted (p<.05). The ratio of the thickness of surface muscle fibers to the total thickness of muscle fibers was higher in the exercise method in which the arms and legs were lifted (p<.05), while the ratio of the thickness of deep muscle fibers to the total thickness of muscle fibers was higher in the hollowing and bracing exercise method in which the arms and legs were not lifted (p<.05). Conclusion : When lumbar stabilization exercise should be performed at clinics to strengthen the deep muscle fibers of the multifidus muscles that have larger effects on the stability of spinal segments, taking the stability of the spine into consideration indicates that, hollowing and bracing exercise methods that do not that cause isotonic extension to the spine are appropriate.

• Composites Research
• /
• v.35 no.6
• /
• pp.456-462
• /
• 2022

Since natural fibers are highly flammable, it is not easy to make them flame retardant. In this study, a liquid flame retardant based on phytic acid, APTES, and Thiourea, which are flame retardant candidates derived from nature, was prepared and its performance was verified through flame retardant treatment and flame retardancy evaluation of bamboo fibers. When a liquid flame retardant is used, it is possible to treat a large amount of natural fibers with flame retardant treatment. Nine types of flame-retardant treated bamboo fibers were prepared according to the Taguchi design of experiment method. Thereafter, vertical burning test and microcalorimeter test were performed for flame retardancy evaluation, and the surface of natural fibers before and after flame-retardant treatment was compared using scanning electron microscope. The results show that phytic acid has a significant effect on improving the flame retardancy of natural fibers. Through microstructure analysis, it was assumed that the phytic acid helps flame retardant to uniformly adhere to the surface of natural fibers. If such research results are utilized, it is possible to make a large amount of natural fibers high flammability in an eco-friendly way, which is expected to be advantageous for the application of prototypes.

• Composites Research
• /
• v.22 no.4
• /
• pp.41-49
• /
• 2009

Natural fiber reinforced composites are emerging as low-cost, lightweight, recyclable, and eco-friendly materials. These are biodegradable and non-abrasive. Due to eco-friendly and biodegradable characteristics of natural fibers, they are being considered as potential candidates to replace the conventional fibers. The chemical, mechanical, and physical properties of natural fibers have distinct features depending upon the cellulose content of the fibers which varies from fiber to fiber. The mechanical properties of composites are influenced mainly by the adhesion between matrix and fibers. Several chemical and physical modification methods of fiber surface were incorporated to improve the tiber-matrix adhesion resulting in the enhancement of mechanical properties of the composites. This paper outlines the works reported on natural tiber reinforced composites with special reference to the type of fibers, polymer matrix, processing techniques, treatment of fibers, and fiber-matrix interface.

• Korean Journal of Bronchoesophagology
• /
• v.2 no.1
• /
• pp.97-102
• /
• 1996

The larynx has three major functions such as protective reflex, respiration and phonation, and is richly innervated by sensory, sympathetic and parasympathetic nerves. The sensory innervation of the laryngeal mucosa, which is involved in the perception of pain, mechanical and chemical irritation, prtects the airway via various laryngeal reflexes. We studied the distribution of Substance P (SP) and Calcitonin Gene-Related Peptide (CGRP) sensory fibers in the rat's larynx using the immuno-histochemical methods. Many SP and CGRP immunoreactive fibers were found in all regions of the laryngeal mucosa except the vocal cords. SP immunoreactive fibers showed a very similar distribution to the CGRP fibers in the epithelium and submucosa. But SP immunoreactive fibers were sparser than CGRP immunoreactive fibers in distribution density. Both reactive fibers were denser in the supraglottic region than subglottic region. Especially, intraepithelial fibers displayed the densest innervation to the laryngeal surface of the epiglottis. h the subepithelium, SP and CGRP immunoreactive fibers were distributed along the wall of vessels and around the glands. The present results suggest that the regional distribution of SP and CGRP immunoreactivity may be responsible for the protective reflex function of the laryngeal inlet.

• Korean Journal of Materials Research
• /
• v.19 no.10
• /
• pp.562-568
• /
• 2009

Electrospinning is a technique that produces sub-micron sized continuous fibers by electric force from polymer solutions or melts. Due to its versatile manufacturability and the cost effectiveness, this method has been recently adopted for the fabrication of one-dimensional materials. Here, we fabricated polyacrylonitrile (PAN) polymer fibers, from which uniform carbon fibers with diameters of 100-200 nm were obtained after carbonization at 800 $^{\circ}C$ in N$_2$. Special emphasis was directed to the influence of the phase separated polymer solution on the morphology and the microstructure of the resulting carbon fiber. The addition of poly(stylene-co-acrylonitile) (SAN) makes the polymer solution phase separated, which allows for the formation of internal pores by its selective elimination after electrospinning. XPS and Raman Spectroscopy were used to confirm the surface composition and the degree of carbonization. At the PAN:SAN = 50:50 in vol%, the uniform carbon fibers with diameters of 300$\sim$500 nm and surface area of 131.6 m$^2$g$^{-1}$ were obtained.

• Journal of the Korean Ceramic Society
• /
• v.42 no.7 s.278
• /
• pp.469-474
• /
• 2005

Activated Carbon Fibers (ACFs) are widely used as adsorbents in technologies related to pollution abatement due to their highly porous structure and large adsorption capacity. The porous structure and surface area of ACFs depends strongly on both the activation processes arid the nature .of the precursors. The chemical activation with hydroxides has recently been, of great interest as it permits the preparation of activated carbon fibers with highly developed porosity. In this work, OXI-PAN fiber used as precursor for the preparation of activated carbon fibers by chemical activation with KOH and NaOH. The affects of several activation conditions on the surface properties, pore size distribution and adsorption capacity of Ag ion and Iodine ion on ACFs studied.