• Journal of Bio-Environment Control
• /
• v.19 no.3
• /
• pp.147-152
• /
• 2010

Poor fruit set during winter period is one of the biggest problem in plastic tunnel watermelon cultivation. Hand pollination is inevitable to maximize fruit set of the winter watermelon. Productivity and viability of pollen grain and organic solvents for pollen storage were investigated. All cultivars produced more than 10 mg/flower except for 'Kumchun' cultivar. Pollen amount per flower were 13.8 mg in 'Bok' and 12.1 mg in 'Speedkul'. Germination rate of pollen grains incubated at $30^{\circ}C$ right after soaking in pentane solvent were 76% in 'Kumchun' as the lowest and 92% in 'Apollokul' as the highest. The pollen of 'Bok' showed the highest germination rate by 75% after a 15-day storage in pentane. All cultivars showed their pollen germination rate below 25% after a 24-day storage. Among the cuitivars, speed of pollen tube growth in vitro were relatively lower in 'Kumchun' and 'Sambokkul' by below $50\;{\mu}m/hr$. Pollen tube of these cultivars tended to burst during its elongation on the medium. Pollen stored 24 hrs in organic solvents showed 45, 39, 34, 23, and 19% of germination in pentane, ethyl ether, n-hexane, ethyl acetate, and acetone, respectively. Compared with light condition, pollen viability was higher in darkness during pollen storage in organic solvents. Pollen grain was susceptible to the organic solvent. The viability of pollen grains seems to be influenced greatly by duration of soaking pollen in organic solvent and the polarity of solvents. Organic solvent damages surface of pollen grain and extent of damage was varied by the solvents.

• Journal of the Korean Arthroscopy Society
• /
• v.6 no.1
• /
• pp.25-30
• /
• 2002

Purpose : To evaluate the clinical results of displaced tibial intercondylar eminence fractures which were treated with transpatellar cannulated screw fixation. Materials and Methods : Ten patients with displaced tibial intercondylar eminence fractures were treated between December 1998 and May 2001 and then followed up for more than one year. They were treated arthroscopic reduction and fixation of fracture site by cannulated screw through the hole of nonarticular surface of inferior patella. They were prospectively evaluated with regard to their clinical and radiologic results. Results : Radiologic unions occurred at an average of 9.2 weeks. Average anterior displacements were 1.8 mm in stress x-rays and 1.1 mm in KT-2000 arthrometer. Average loss of extension was $4.1^{\circ}$. Functional results were excellent in 7 cases and good in 3 cases. Conclusion : Arthroscopic transpatellar cannulated screw fixation is one of the useful methods for the treatment of displaced tibial intercondylar eminence fractures.

• The Journal of the Korea Contents Association
• /
• v.13 no.11
• /
• pp.957-967
• /
• 2013

While a vast number of cad drawings are produced in the life cycle of construction projects from the planning, design, and construction phases to the maintenance and control phases, the creation and distribution of non-standard drawings make it difficult for the construction parties to communicate with one another and to recycle, maintain, and control drawings by project phase. The Korea standard of CAD drawing in construction CALS/EC, which stipulates the standard for construction CAD drawings, is based on roads, rivers, and railways in line- and unit-based structures, allowing the creation of standardized CAD drawings. Such standard, however, cannot be easily applied to construction projects with multiple facilities like harbors, housing sites, or lands consisting of surface forms. In particular, port field consist of complex docks and amenities located in a certain coastal area based on multiple objectives. They also contain the concept of housing sites, like background land, and are composed of various civil engineering facilities, construction facilities, and port field, so that the existing CAD drawing standard cannot be easily implemented. Therefore, the purpose of this study is to maximize the efficiency of the information related to drawing information and to ultimately support smooth information exchanges in construction design by conducting a development research on the expansion of the CAD drawing standard that meets the needs of port field.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.5
• /
• pp.616-621
• /
• 2007

In order to improve the storage stability of steamed bread, fermented pine needle extract syrup potentially with several functional properties was added in manufacturing the products at levels of 8.3, 11 and 18% based on Brix degree of the dough. The manufactured bread was stored at ambient conditions and measured for quality attributes. Dough added with the fermented pine needle extract syrup maintained its pH and water activity at levels of $5.45{\sim}5.90\;and\;0.94{\sim}0.96$, which are normally suitable for yeast fermentation and for appropriate dough hardness. Addition of the extract syrup increased the bread volume by more than 20%. The bread with higher content of the pine needle extract syrup showed slower increase of bread hardness during storage, suggesting retardation of bread retrogradation. The addition of the pine needle extract syrup in bread dough also inhibited growth of the aerobic bacteria and molds on the bread surface (by $0.8{\sim}24$ in log (CFU/g) at 4 day storage). Use of higher than 11% concentration presented initially a strong fine needle flavor to the bread, which disappeared soon after 2 days. Generally addition of the pine needle extract syrup did not give negative effects on the bread quality including sensory quality. Therefore, the addition of the needle extract syrup could contribute to improving the storage stability and extending the shelf life of the bread.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.8
• /
• pp.813-821
• /
• 2005

This paper presents a modeling study of thermal dynamics and turbid current in the Obong Lake, Kangreung. The lake formed by the artificial dam in 1983 for agricultural water supply, is currently under consideration of reconstruction in order to expand the volume of reservoir for water supply and flood control in downstream area. The US Army Corps of Engineers' CE-QUAL-W2, a two-dimensional laterally averaged hydrodynamic and water quality model, was applied to the lake after reconstruction as well as the present lake. The model calibration and verification were conducted against surface water levels and temperature of the lake measured during the years of 2001 and 2003. The model results showed a good agreement with fold measurements both in calibration and verification. Utilizing the validated model, an impact of dam reconstruction on vertical temperature and hydrodynamics were predicted. The model results showed that steep temperature gradient between epilimnion and hypolimnion would be formed during summer, along with extension of cold deep water after reconstruction. During winter and spring seasons, however, the vertical temperature profiles was predicted to be quite similar both before and after reconstruction. This results indicated that thermal stratification would become stronger during summer and stay longer after dam reconstruction. From the examination of predicted water movements, it was noticed that the upstream turbid current would infiltrate into the interface between metalimnion and hypolimnion and then suspended solids would slowly settle down to the bottom before reconstruction. After reconstruction, however, it was shown that the upstream turbid current would stay longer in metalimnion with similar density due to strong stratification. The model also predicted that dam reconstruction would make suspended solids near the dam location significantly decrease.

• Journal of Biomedical Engineering Research
• /
• v.23 no.3
• /
• pp.171-179
• /
• 2002

It is well known that the geometry of the articular surface plays a major role in the kinematic and kinetic analysis to understand human knee joint function during motion. The functionality of the knee joint cannot be accurately modeled without considering the effects of sliding and lolling motions. We Present a 3-D human knee joint model considering sliding and rotting motion and major ligaments. We employ more realistic articular geometry using two cam profiles obtained from the extrusion of the sagittal Plain view of the representative Computerized Tomography image of the knee joint compared to the previously reported model. Our model shows good agreement with the already reported experimental results on Prediction of the lines of force through the human joint during gait. The contact point between femur and tibia moves toward the Posterior direction as the knee undergoes flexion, reflecting the coupling of anterior and Posterior motion with flexion/extension. The anterior/posterior displacement of the contact Point on the tibia plateau during one gait cycle is about 16 mm. for the lateral condyle and 25 mm. for the medial condyle using the employed model Also. the femur motion on the tibia undergoes lateral/medial movement about 7 mm. and 10 mm. during one gait cycle for the lateral condyle and medial condyle. respectively. The developed computational model maybe Potentially employed to identify the joint degeneration.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.3 no.2
• /
• pp.25-31
• /
• 1996

Various treaments such heating, acid tenting, acid healing, alkaline treating, acid+alkaline renting were attempted to investigate their effects on molar ratio, chemical composition, DTA and specific surface area(SSA) of natural zeolite poder. Molar ratio, Si to AI. of natural zeolite was 4.78, which represented high silica type. Composition of natural zeolite showed that $SiO_2$ was 66.34% $Al_2O_3$ was 13.89%, $Fe_2O_2$ was 1.55% X-ray diffraction showed that main component of natural zeolite was mordenite and clinoptliolite. Differential Thermal Analysis and Thermogravimetry curve of natural zeolite was showed to peak of endothermic peak at $80^{\circ}C$ and it means to the peak of dehydrate reaction, but recristalization was not formed below at $1,000^{\circ}C$. Weight loss during calcination was 16% at $1,000^{\circ}C$. Thermal treatments on SSA of natural zolite powder decreased from $75.2m^2/g\;to\;2.1m^2/g$. In contrast chemical treatments on SSA showed to increase to $300.2m^2/g$(1 N HCl treating), $54.9m^2/g$(1 N NaOH) and $90.9m^2/g$(HCl+NaOH)tudy, it could be proposed to employ acid tret method as packaging materisls for MA packaging.

• Journal of Food Hygiene and Safety
• /
• v.23 no.4
• /
• pp.330-337
• /
• 2008

Betarich carrots were washed at various hypochloric acid(HCA) concentration and steeping time and packed in PE bag keeping at $8^{\circ}C$ for 12 days, in order eventually to examine microbiology, firmness, surface color, whiteness index(WI) and sensory quality. It was found that total bacterial counts at T-II and T-III with the 3 minute steeping were $4.37{\pm}0.19\;\log\;CFU/g$ and $4.27{\pm}0.13\;\log\;CFU/g$ respectively, showing slight decrease compared to control condition. E. coli was not detected at all treatments but less coliforms were detected at the 8-day treatments of T-II and T-III. Treatment of 3-minute steeping showed smaller reduction in firmness than that of I-minute steeping at 12-days, and T-1 (T-3) had the largest (smallest) reduction among them. It was also found that during the treatment the L-value showed decreasing trend, but the parameter a- and b-value showed increasing trend. WI increased, and its change was small with the increase in HCA concentration. The sensory quality check after 8 day storage showed that evaluation of the off-flavor appeared to be significantly high (p<0.05) at both non-treatment and HCA treatment. On the basis of the results above, it is likely to be more effective to prolong the period of circulation of beta rich carrots if you use HCA over 50 ppm for washing betarich carrots. This study will contribute to improve safety and quality in circulation of beta rich carrots.

• Journal of fish pathology
• /
• v.21 no.1
• /
• pp.45-56
• /
• 2008

This study was conducted to find out biological responses of bivalves exposed to organotin compound.The results of the study confirmed that tribultyltin chloride (TBTCl) induce reduction of survival rate andburrowing activity, and histopathological feature in the foot structure of the equilateral venus, Gomphinaveneriformis. The experimental period was 36 weeks. The experimental groups consisted of a control and 3TBTCl exposure groups (0.4, 0.6, 0.8 ym TBTCl L'). The survival rate and burrowing activity were record-ed daily. For histological analysis, foot tissues were fixed in Bouin' s fluid and then stained H-E stain, AB-PAS (PH 2.5) reaction and Masson's trichrome stain after having serially sectioned the tissue by paraffinmethod at thickness of 4-6 ym. The survival rate was not significantly different between the control andexposure groups for 20 weeks, but in 0.8 Um TBTCl L', it was on the decreased ever since the exposure. Theburrowing activity was not significantly different in the exposure group compared to the control up to 12weeks, but in 0.6 and 0.8 ym TBTCl L', it measured the lowest level after 20 weeks. The foot is composedof the epidermal layer, connective tissue, and muscular layer. The epidermal layer is composed of simplecolumnar, cuboidal epithelia and mucous cells. The cilia were well developed on the apical surface ofepithelium, Circular, longitudinal and transverse muscle bundle were well developed in the muscular layer.The majority mucous cells showed blue color (542c) when it subjected to AB-PAS (PH 2.5) reaction. Nohistopathological alterations in the foot were observed up to 12 weeks. After 20 weeks of exposure to 0.8 (anTBTCl L'', the foot samples of exposed G. veneriformis showed disappearance of cilia and striated borderpartially and extension of hemolymph sinus. The mucous cell increased in the marginal of foot. At 28-weekof exposure to 0.4 ym TBTCl L', it observed weekly acid (564c), neutral (264c) and mixed mucous cell. At36-week of exposure to 0.6 ym TBTCl L', it showed fragmentation of the muscle and collagen fiber bundle,and also diappearance of cilia on epithelia and edema of epithelium in 0.8 ym TBTCl L''.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.421-422
• /
• 2011

The first part is about development of a liquid target for a neutron source, which is designed to overcome many of the limitations of traditional beam-target neutron generators by utilizing a liquid target neutron source. One of the most critical aspects of the beam-target neutron generator is the target integrity under the beam exposure. A liquid target can be a good solution to overcome damage to the target such as target erosion and depletion of hydrogen isotopes in the active layer, especially for the one operating at high neutron fluxes with no need for water cooling. There is no inherent target lifetime for the liquid target neutron generator when used with continuous refreshment of the target surface exposed to the energetic beam. In this work, liquid target containing hydrogen has been developed and tested in vacuum environment. Potentially, liquid targets could allow a point neutron source whose spatial extension is on the order of 1 to $10{\mu}m$. And the second is about the vacuum ultraviolet (VUV) spectrometer which is designed as a five-channel spectral system for ITER main plasma measurement. To develop and verify the design, a two-channel prototype system was fabricated with No. 3 (14.4 nm~31.8 nm) and No. 4 (29.0 nm~60.0 nm) among the five channels. For test of the prototype system, a hollow cathode lamp is used as a light source. The system is composed of a collimating mirror to collect the light from source to slit, and two holographic diffraction gratings with toroidal geometry to diffract and also to collimate the light from the common slit to detectors. The two gratings are positioned at different optical distances and heights as designed. To study the appropriate detector for ITER VUV system, two different electronic detectors of the back-illuminated charge coupled device and the micro-channel plate electron multiplier were installed and the performance has been investigated and compared in the same experimental conditions. The overall system performance was verified by measuring the spectrums.