• Physical Therapy Rehabilitation Science
• /
• v.10 no.4
• /
• pp.503-511
• /
• 2021

Objective: This study compared pain, muscle power (MP), muscle thickness (MT), and normalized position of the scapula (POS) between general physical therapy and general physical therapy with strengthening exercises of the lower trapezius in patients with rounded shoulder and chronic neck pain. Design: Randomized controlled trial. Methods: The participants were 30 patients of W hospital in Gangnamgu, Seoul, with rounded shoulders who were diagnosed with chronic neck pain. Rounded shoulder was defined as a distance between the surface and acromion of >1 inch in the supine position. The participants were assigned to an experimental group (n=15) and a control group (n=15). The experimental group completed four types of strengthening exercises program for 15 minutes, twice weekly, for a total of 5 weeks. Soft tissue mobilization (STM), cervical extension flexion rotation (CEFR), and physical modality were also performed in both groups. Results: The degree of pain was assessed using the numerical rating scale (NRS), MP was measured a handheld dynamometer, MT was measured by ultrasound, and POS was measured using a tapeline. Significant between-group differences were observed in VAS, MP, MP, and POS. Significant changes were observed in the experimental group for VAS, MP, MT, and POS. Conclusions: Based on the results of this study, it was indicated that lower trapezius strengthening exercises performed together with general physical therapy was significantly improved in pain, MP, MT, and POS in patients with rounded shoulder and chronic neck pain compared to when general physical therapy was performed alone.

• Journal of the Korean Society of Physical Medicine
• /
• v.14 no.3
• /
• pp.13-20
• /
• 2019

PURPOSE: Sitting with crossed legs may have an effect on maintaining a healthy body posture and proper functioning of the respiratory system. Thus, this study's objective was to identify whether or not sitting with crossed legs affects the vertebral angle, chest wall mobility, the pulmonary function, and the activity of the respiratory muscles. METHODS: Thirty healthy subjects were recruited for this study (16 males and 14 females). The vertebral angle, chest wall mobility, pulmonary function, and the activity of the respiratory muscle were measured while the subjects sat in the correct posture and these factors were again measured with the subjects seated with their legs crossed. Three-dimensional motion analysis was used to determine the trunk and lumbar vertebral angles. Surface electromyography was employed to measure the sternocleidomastoid, the rectus abdominis, and the external and internal oblique abdominis muscles. A tapeline was utilized to evaluate the subjects' chest wall mobility. Spirometry was assessed to determine the forced vital capacity and forced expiratory volume in one second. Paired t-tests were then performed (p<.05). RESULTS: There were significant differences in the trunk and lumbar flexion angles, the chest wall mobility, the activity of the right external oblique muscle, and the left internal oblique abdominis muscle. However, the difference in pulmonary function did not reach statistical significance. CONCLUSION: A crossed leg posture caused slight thoracic extension and lumbar flexion, which may lead to a decrease of the chest wall mobility and also to an imbalance of the abdominal muscles. Therefore, sitting with a crossed leg posture should be avoided. Yet a crossed leg posture did not have any clinical effect on the pulmonary function of healthy people. It may be necessary to study the effects of sitting with crossed legs over an extended period of time for patients suffering with impaired respiratory function.

• Food Science of Animal Resources
• /
• v.39 no.2
• /
• pp.309-323
• /
• 2019

Fish oil consists of omega-3 fatty acids which play an important role in human health. Its susceptibility to oxidation causes considerable degradation during the processing and storage of food products. Accordingly, encapsulation of this ingredient through freeze drying was studied with the aim of protecting it against environmental conditions. Gum arabic (GA) was used as the wall material for fish oil nanoencapsulation where tween 80 was applied as the emulsifier. A water-in-oil (W/O) emulsion was prepared by sonication, containing 6% fish oil dispersed in aqueous solutions including 20% and 25% total wall material. The emulsion was sonicated at 24 kHz for 120 s. The emulsion was then freeze-dried and the nanocapsules were incorporated into probiotic fermented milk, with the effects of nanocapsules examined on the milk. The results showed that the nanoparticles encapsulated with 25% gum arabic and 4% emulsifier had the highest encapsulation efficiency (EE) (87.17%) and the lowest surface oil (31.66 mg/100 kg). Using nanoencapsulated fish oil in fermented milk significantly (p<0.05) increased the viability of Lactobacillus plantarum as well as eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA) contents. The fermented milk sample containing fish oil nanoencapsulated with 25% wall material and 4% emulsifier yielded the greatest probiotic bacterial count (8.41 Log CFU/mL) and the lowest peroxide value (0.57 mEq/kg). Moreover, this sample had the highest EPA and DHA contents. Utilizing this nanoencapsulated fish oil did not adversely affect fermented milk overall acceptance. Therefore, it can be used for fortification of low fat probiotic fermented milk.

• Korean Journal of Breeding Science
• /
• v.49 no.3
• /
• pp.230-234
• /
• 2017

A mungbean variety 'Suhyeon' (Vigna radiata (L.) Wilczek) was derived from the cross between 'Jeonnam14' and 'IT208777' at the Jeollanamdo Agricultural Research and Extension Services (JARES) in 2010. 'Suhyeon' has erect growth habit, heart leaflet, green hypocotyl, black and straight pod when matured, and dull green seed surface. The stem length of 'Suhyeon' was 66 cm, which was 5 cm less than check variety 'Owool'. The pods number per plant of 'Suhyeon' was 24, which was 5 more than check variety. The sprout yield ratio of 'Suhyeon' was 8.67 times, which was 16% more than check variety. The contents of starch, protein and fatty acid of seed were 62.7, 27.3, 1.89%, respectively. The average yield of 'Suhyeon' was 1.74 ton/㏊, which increased 8% more than that of check variety. (Variety registration number: 5107)

• The Korean journal of sports medicine
• /
• v.36 no.4
• /
• pp.197-206
• /
• 2018

Purpose: This study analyzed the muscle activity changes induced by motions of reaching forward and chest expansion that were examined from the bilateral muscles with rectus abdominis, external oblique, multifidus, and longissimus thoracic using Pilates cadillac instrument. Methods: Nine young adult women, who have no musculoskeletal disorder and any of chronic diseases, were participated. Surface electromyography system was used for recording of all signals produced by muscles, and then normalized as percentage of maximum voluntary isometric contraction (%MVIC). The paired t-test and repeated measures of analysis of variance was performed. Results: Reaching-forward motion showed a higher muscle activity from non-dominant external oblique muscle than that of the chest-expansion motion. During both reaching-forward motion and chest-expansion motion, MVIC values collected from dominant side of external oblique muscle were shown a significantly lower than the values obtained from non-dominant side (p<0.05). Conversely, %MVIC values in external oblique muscle collected from dominant side showed a significantly higher than the values obtained from non-dominant side of the same oblique muscle (p<0.05). Reaching-forward motion was caused a higher %MVIC on non-dominant external oblique muscle than that of the chest-expansion motion (p<0.05). Regardless of dominant or non-dominant sides, external oblique muscle was shown the highest activation rate of all the other muscles during reaching forward action, and longissimus thoracic muscle was shown the highest activation rate of all the other muscles during chest expansion action. Conclusion: Reaching-forward motion is suitable for activating an external oblique muscle, and chest-expansion motion is an effective enough in activating of longissimus thoracic muscle.

• Nuclear Engineering and Technology
• /
• v.54 no.9
• /
• pp.3272-3282
• /
• 2022

To improve the safety and life extension qualities of nuclear fuel rods which is currently made of zirconium (Zr) alloy, research on the application of chromium (Cr) coating was conducted. Cr coating has advantages such as increased corrosion resistance and reduced oxidation rate, but non-destructive thickness evaluation studies are needed to ensure the reliability of the steps taken to provide uniform coating thickness. Eddy current testing (ECT) is a representative non-destructive technique for such as thickness evaluation and surface defect inspection. To inspect changes in thickness at micron scale, the Swept Frequency Eddy Current Testing (SFECT) method was applied to select a frequency range sensitive to changes in thickness. The coating thickness was evaluated using changes in signals, such as that for impedance. In this study, basic research was performed to evaluate the thickness of the Cr coating on a rod using an encircling sensor and the SFECT technique. The sensor design parameters were determined through simulation, after which the new sensor was manufactured. A sensor capable of measuring the thickness of a non-uniformly Cr-coating rod was selected through an experiment evaluating the performance of the manufactured sensor. This was done using the impedance-difference of a Cr-coating rod and a Zr alloy rod. The possibility of evaluation of the Cr coating thickness was confirmed by comparing the experimental results with the selected sensor and the signals of the measured Cr-coating rod. All simulation results were verified experimentally.

• The Journal of Advanced Prosthodontics
• /
• v.13 no.2
• /
• pp.79-88
• /
• 2021

Purpose. To assess peri-implant stress distribution using finite element analysis in implant supported fixed partial denture with occlusal schemes of cuspally loaded occlusion and implant protected occlusion. Materials and methods. A 3-D finite element model of mandible with D2 bone with partially edentulism with unilateral distal extension was made. Two Ti alloy identical implants with 4.2 mm diameter and 10 mm length were placed in the mandibular second premolar and the mandibular second molar region and prosthesis was given with the mandibular first molar pontic. Vertical load of 100 N and and oblique load of 70 N was applied on occlusal surface of prosthesis. Group 1 was cuspally loaded occlusion with total 8 contact points and Group 2 was implant protected occlusion with 3 contact points. Results. In Group 1 for vertical load, maximum stress was generated over implant having 14.3552 Mpa. While for oblique load, overall stress generated was 28.0732 Mpa. In Group 2 for vertical load, maximum stress was generated over crown and overall stress was 16.7682 Mpa. But for oblique load, crown stress and overall stress was maximum 22.7561 Mpa. When Group 1 is compared to Group 2, harmful oblique load caused maximum overall stress 28.0732 Mpa in Group 1. Conclusion. In Group 1, vertical load generated high implant stress, and oblique load generated high overall stresses, cortical stresses and crown stresses compared to vertical load. In Group 2, oblique load generated more overall stresses, cortical stresses, and crown stresses compared to vertical load. Implant protected occlusion generated lesser harmful oblique implant, crown, bone and overall stresses compared to cuspally loaded occlusion.

• Physical Therapy Korea
• /
• v.29 no.3
• /
• pp.215-224
• /
• 2022

Background: The presence of the lumbopelvic-hip neuromuscular chain is essential for dynamic spinal stabilization; its therapeutic effects on dynamic movements of the distal extremity segment and underpinning motor mechanism remain unknown and warrant further study on participants with low back pain (LBP). Objects: We aim to compare the effects of the broken chain exercise (BCE) and connected chain exercise (CCE) on electromyography (EMG) amplitude and onset time in participants with and without LBP. Methods: Randomized controlled clinical trial. A convenience sample of 40 nonathletic participants (mean age: 24.78 ± 1.70) with and without LBP participated in this study. All participants underwent CCE for 30 minutes, 30-minute daily. We measured EMG amplitude and onset times on bilateral erector spinae (ES), gluteus maximus (GM), hamstring (HAM), transverse abdominis (TrA), internal oblique (IO), and external oblique (EO) during the prone hip extension (PHE) test before and after the BCE and CCE. We used multivariate analysis of variance (MANOVA) to analyze the amplitude and onset time difference between exercises (BCE and CCE) and Pearson's correlations to determine any synergistic relationship among the HAM, GM, bilateral TrA/IO, and ES muscles. The statistical analyses were used at p < 0.05. Results: MANOVA showed that CCE was more decreased on EMG amplitude in HAM and bilateral ES, while increased GM and contralateral TrA/IO than BCE (p < 0.05). MANOVA EMG onset time data analyses revealed that the main effect of the conditions was significant for all HAM, GM, and bilateral ES muscles, whereas the main effect for the group was significant only for GM and contralateral ES in healthy and LBP groups. Pearson's correlation coefficient was computed to assess the relationship between BCE and CCE on dependent variables. In most of the muscles, there was a strong, positive correlation between the two variables, and there was a significant relationship (p < 0.001). Conclusion: CCE produced more effective and coordinated core stabilization and motor control mechanism in the lumbopelvic-hip muscles in participants with and without LBP during PHE than BCE.

• Physical Therapy Korea
• /
• v.29 no.1
• /
• pp.79-86
• /
• 2022

Background: Bird dog exercise (BDE) is one of the lumbar stabilization exercises that rehabilitate low back pain by co-contraction of the local and global muscles. Previous studies have reported the effect of various type of BDEs (for example, practicing the exercises on various surfaces and changing the limb movement) for muscle co-contraction. Objects: This study aimed to investigate the effect of knee joint flexion position of the raised lower limb on abdominal and back muscle activity during BDE in patients with chronic low back pain (CLBP). Methods: Thirteen males participated in this study (age: 32.54 ± 4.48 years, height: 177.38 ± 7.17 cm). Surface electromyographic (SEMG) data of the internal abdominal oblique (IO), external abdominal oblique (EO), lumbar multifidus (MF), and thoracic part of the iliocostalis lumborum (ICLT) were collected in two knee joint flexion positions (90° flexion versus 0° flexion) during BDE. The SEMG data were expressed as a percentage of root mean square mean values obtained in the maximal voluntary isometric contraction. Results: Greater muscle activity of the IO (p = 0.001), MF (p = 0.009), and ICLT (p = 0.021) of the raised lower limb side and the EO (p = 0.001) and MF (p = 0.009) of the contralateral side were demonstrated in the knee joint flexion position compared to the knee joint extension position. Greater local/global activity ratios of the abdominal muscle (i.e., IO and EO) of the raised lower limb (p = 0.002) and the back muscle (i.e., MF and ICLT) of the contralateral side (p = 0.028) were also noted in the knee joint flexion position. Conclusion: BDE with a knee joint flexion position might be recommended as an alternative lumbar stabilization exercise to enhance muscle activity in both the raised lower limb and the contralateral sides of the trunk for individuals with CLBP.

• Atmosphere
• /
• v.33 no.4
• /
• pp.423-440
• /
• 2023

The updated version of Global Ocean Data Assimilation and Prediction System (GODAPS) in the NIMS/KMA (National Institute of Meteorological Sciences/Korea Meteorological Administration), which has been in operation since December 2021, is being introduced. This technical note on GODAPS2 describes main progress and updates to the previous version of GODAPS, a software tool for the operating system, and its improvements. GODAPS2 is based on Forecasting Ocean Assimilation Model (FOAM) vn14.1, instead of previous version, FOAM vn13. The southern limit of the model domain has been extended from 77°S to 85°S, allowing the modelling of the circulation under ice shelves in Antarctica. The adoption of non-linear free surface and variable volume layers, the update of vertical mixing parameterization, and the adjustment of isopycnal diffusion coefficient for the ocean model decrease the model biases. For the sea-ice model, four vertical ice layers and an additional snow layer on top of the ice layers are being used instead of previous single ice and snow layers. The changes for data assimilation include the updated treatment for background error covariance, a newly added bias scheme combined with observation bias, the application of a new bias correction for sea level anomaly, an extension of the assimilation window from 1 day to 2 days, and separate assimilations for ocean and sea-ice. For comparison, we present the difference between GODAPS and GODAPS2. The verification results show that GODAPS2 yields an overall improved simulation compared to GODAPS.