• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.22 no.3
• /
• pp.569-578
• /
• 1998

The mode I and II stress intensity factors have been calculated theoretically for the cracked plate reinforced with a plate by symmetric spot welding under remote mixed mode loading. This is the extension of authors' previous work for the reinforced cracked plate under remote normal stress. Regardless of loading types, the reinforcement effect gets better as one joining spot is closer to the crack tip and the others are closer to the crack surface, and optimum number of the joining spots can be existed. For the present model, the remote loading parallel to crack surface produces the mode I stress intensity factor.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.04a
• /
• pp.209-214
• /
• 2002

Mechanical micro-engineering is an easy and cheap way to fabricate micro-structures. If the application of the conventional machining method using flat-end mill becomes available for the micro-manufacturing process, it will be advanced as an extension of the conventional machining process. In this study, micro-grooves cutting using flat-end mill(($\phi$8) was performed. The characteristics on flat-end milling was investigated to improve machinability of micro-grooves. The experiments were performed according to variations of spindle revolution, depth of cut, and feed rate. Machinability through various cutting conditions was evaluated by surface geometry, tool wear, and cutting force. The results show that micro V-grooves of width(pitch) 29${\mu}{\textrm}{m}$ were acquired by flat-end milling. The maximum and minimum roughness of the wall of grooves was 438 and 67nm, respectively

• Proceedings of the KIEE Conference
• /
• 2003.10a
• /
• pp.242-245
• /
• 2003

A garter spring, which is a long, special, close-coiled extension spring with its ends joined to form a ring, is used in tulip contactor between vacuum circuit breaker and bus bar in switchgear. To carry short-time current and resist welding at the contact surface in the tulip contactor, the garter spring must transmits an uniform contact force to the contact surface through the contact chips arranged in the circumference of bus bar. In this paper, the system for measurement of the contact force by the garter spring is developed. Using the developed measurement system, the design of the connection structure including the garter spring is reviewed to obtain the uniform contact forces in all of contact chips.

• Selected Papers of The Society of Naval Architects of Korea
• /
• v.2 no.1
• /
• pp.1-17
• /
• 1994

For a planar curve-sided panel with constant or linear density distributions of source or doublet in the singularity methods, Cantaloube and Rehbach show that the surface integral can be transformed into contour integral by using Stokes'formulas. As an extension of their formulations, this paper deals with a planar polygonal panel for which we derive the closed-forms of the potentials and the velocities induced by the singularity distributions. Test calculations show that the analytical evaluation of the closed-forms is superior to numerical integration (suggested by Cantaloube and Rehbach) of the contour integral. The compact and explicit expressions may produce accurate values of matrix elements of simultaneous linear equations in the singularity methods with much reduced computer time.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05b
• /
• pp.795-801
• /
• 1998

Metallic fatigue of Pressurized Water Reactor(PWR) materials is a generic safety issue for commercial nuclear power plants. It is very important to obtain the fatigue usage factor for component integrity and life extension. In this paper, fatigue usage was obtained at the inside surface of Kori unit 2, 3 and 4 RCP casing weld, based on the design transient. And it was intended to establish the procedure and the detailed method of fatigue evaluation in accordance with ASME Section III Code. According to this code rule, two methods to determine the stress cycle and the number of cycles could be applied. One method is the superposition of cycles of various design transients and the other is based on the assumption that a stress cycle correspond to only one design transient. Both method showed almost same fatigue usage in the RCP casing weld.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.25 no.6
• /
• pp.459-466
• /
• 2005

The scanning laser source (SLS) technique has been proposed recently as an effective way to investigate small surface-breaking defects, By monitoring the amplitude and frequency changes of the ultrasound generated as the SLS scans over a defect, the SLS technique has provided enhanced signal-to-noise performance compared to the traditional pitch-catch or pulse-echo ultrasonic methods, An extension of the SLS approach to map defects in microdevices is proposed by bringing both the generator and the receiver to the near-field scattering region of the defects, To facilitate near-field ultrasound measurement, silicon microcantilever probes are fabricated using microfabrication technique and their acoustical characteristics are investigated, Then, both the laser-generated ultrasonic source and the microcantilever probe are used to monitor near-field scattering by a surface-breaking defect.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07a
• /
• pp.489-492
• /
• 2003

In this paper, we experimented on the deterioration process of power supply cords and analyzed the heating temperature of each part of those cords. We also analyzed the surface states, metallurgical structures surface structures and compositions of the wire melted by over-current. In the results of the analyses, the covering began to be deteriorated from the inside. The heating temperature of extension cord was higher than that of plug body. The dendrite structures appeared at the melted wire. By the SEM and EDS analyses, the dendrite structure showed the growth of copper oxide. We found out the characteristics of PVC insulated flexible cords by over-current from the above experiments and analyses. These results may be useful data in the analyses of deterioration causes of power supply cords.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.942-945
• /
• 2002

A garter spring, which is a long. special, close-coiled extension spring with its ends joined to form a ring, is used in connection between vacuum circuit breaker and bus bar in switchgear. To carry short-time current and resist welding at the contact surface in the connection, the garter spring must transmits an uniform contact force to the contact surface through the contact chips arranged in the circumference of bus bar. In this paper, the system for measurement of the contact force by the garter spring is developed. Using the developed measurement system, the design of the connection structure including the garter spring is reviewed to obtain the uniform contact forces in all of contact chips.

• Mycobiology
• /
• v.37 no.2
• /
• pp.158-159
• /
• 2009

In 2007 to 2008, a fruit rot of Melon (Cucumis melo L.) caused by Sclerotium rolfsii occurred sporadically in a farmer's vinyl house in Jinju City. The symptoms started with watersoaking lesion and progressed into the rotting of the surface of fruit. White mycelial mats appeared on the lesion at the surface of the fruit and a number of sclerotia formed on the fruit near the soil line. The sclerotia were globoid in shape, 1${\sim}$3 mm in size, and white to brown in color. The hyphal width was measured 3 to 8 ${\mn}$. The optimum temperature for mycelial growth and sclerotia formation was 30 on PDA. Typical clamp connections were observed in hyphae of grown for 4 days on PDA. On the basis of symptoms, mycological characteristics and pathogenicity to the host plant, this fungus was identified as Sclerotium rolfsii Saccardo. This is the first report of the fruit rot of Melon caused by S. rolfsii in Korea.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2011.05a
• /
• pp.188-188
• /
• 2011

고급스러운 표면의 제품을 선호하는 사람들이 늘어나게 되면서 rough한 표면을 구현하여 광택을 줄인 사틴 니켈 도금 층에 대한 수요가 증가하고 있다. 현재 사틴 니켈 도금 용액에 사용되고 있는 사틴 효과를 구현하기 위한 첨가제 종류 중 에멀젼 타입의 첨가제는 시간이 경과함에 따라서 첨가제 입자들의 뭉침 현상이 발생하게 되고 이로 인하여 도금 용액의 수명이 9시간 정도로 짧게 나타난다. 이에 본 연구에서는 도금 용액 수명을 연장하기 위하여 사틴 첨가제의 재 첨가에 따른 표면 특성을 관찰하였다. 건욕 후 9시간마다 재 첨가할 경우 사틴 효과가 유지되어 용액 수명이 연장 된 것으로 판단된다.