• Steel and Composite Structures
• /
• 제19권5호
• /
• pp.1095-1113
• /
• 2015

In order to determine the mechanical behavior of the curved laminates in practical applications, three right-angled composite brackets with different lay-ups were investigated both experimentally and numerically. In the experimental, quasi-static tests on both unidirectional and multidirectional curved composite brackets were conducted to study the progressive failure and failure modes of the curved laminates. In the numerical modeling, three-dimensional finite element analysis was used to simulate the mechanical behavior of the laminates. Here, a strength-based failure criterion, namely the Ye criterion, was used to predict the delamination failure in the composite curved laminates. The mechanical responses of the laminate subjected to off-axis tensile loading were analyzed, which include the progressive failure, the failure locations, the load-displacement relationships, the load-strain relationships, and the stress distribution around the curved region of the angled bracket. Subsequently, the effects of stacking sequence and thickness on the load carrying capacity and the stiffness of the laminates were discussed in detail. Through the experimental observation and analysis, it was found that the failure mode of all the specimens is delamination, which is initiated abruptly and develops unstably on the symmetric plane, close to the inner surface, and about $29^{\circ}$ along the circumferential direction. It was also found that the stacking sequence and the thickness have significant influences on both the load carrying capacity and the stiffness of the laminates. However, the thickness effect is less than that on the curved aluminum plate.

• 폴리머
• /
• 제26권1호
• /
• pp.105-112
• /
• 2002

연구는 electro-active polymer(EAP)의 특성을 가지는 ion-exchange polymer metal composite(IPMC)을 이용하여 지능형 대장내시경 개발에 목적을 두고 있다. IPMC는 낮은 구동전압과 빠른 반응속도로 인하여 매우 매력적인 물질이다. 본 연구에서는 IPMC구동기의 전극을 무전의 도금 방법을 이용하여 용액함침-환원방법(impregnation-reduction method)으로 제조하였으며 코팅된 백금전극의 횟수에 따라 변위와 변화를 측정하였다. 구동특성을 알아보기 위하여 길이, 주파수에 대한 변위, 힘을 측정하였으며, 주파수 대역은 저주파 대역과 공명주파수 대역을 사용하는 것이 적합하다는 결론을 얻었다. 또한 다양한 구동적 특성과 수분의 함량에 따른 영향에 대해 고전적 적층 이론 (classical laminate theory, CLT)을 이용하여 이방성 IPMC의 응력분포와 수분이동에 따른 모멘트, 변형률, 곡률(cuvature)을 모델링 하였다.

• 농업과학연구
• /
• 제45권2호
• /
• pp.177-184
• /
• 2018

The frost heave process from repeated freezing and thawing actions in winter on forest road cut-slopes is important for forest road maintenance and management. This study investigated the damages of the forest heave process on forest road cut-slopes by measuring the changes in the road-cut surface elevation and sediment production and by conducting vegetation surveys which were aimed at providing information for forest road maintenance plans. The temperature and humidity differences were determined between the north and south cut-slopes. T-test showed that the north slope had a lower temperature and humidity than that of the south slope. Field observations also confirmed frozen soils on the north slopes, indicating that the north slopes are susceptible to frost heave. Sediment was converted to dry weight per unit area ($g/m^2$). T-test showed that the north slope produced more sediment than that of the south slope. The study confirmed that more frost heave occurred on the north cut-slopes than on the south cut-slopes. Vegetation surveys were conducted on five cut-slope plots. Considering the dominant species found above the cut-slopes, vegetations in all the plots are expected to succeed to pine and oak in the future. The dominant species appearing on the cut-slopes of the study area were exotic species because the elapsed time of the site was only 2 - 4 years.

• 대한기계학회논문집A
• /
• 제25권9호
• /
• pp.1400-1409
• /
• 2001

This paper describes a fiber optic sensor suitable for non-contact detection of ultrasonic waves. This sensor is based on a fiber optic Sagnac interferometer. Quadrature phase bias between two interfering laser beams in Sagnac loop is introduced by a polarization controller. A stable quadrature phase bias can be confirmed by observing the interferometer output versus phase bias. This method eliminates a digital signal processing for detection of ultrasonic waves using Sagnac interferometer. Interference intensity is affected by the frequency of ultrasonic waves and the time delay of Sagnac loop. Collimator is attached to the end of the probing fiber to focus the light beam onto the specimen surface and to collect the reflected light back into the fiber probe. Ultrasonic waves produced by conventional ultrasonic transducers are detected. This fiber optic sensor based on Sagnac interferometer is very effective for detection of small displacement with high frequency such as ultrasonic waves used in conventional non-destructive testing.

• The Korean Journal of Pain
• /
• 제8권2호
• /
• pp.350-353
• /
• 1995

The first lesion in neural tissue produced by electrical currents were made in the 19th century by workers using direct current. In 1953, Sweet and Mark clearly demonstrated that DC lesions have unpredictable and ragged borders and may vary in size. They, as well as Hunsperger and Wyss, suggested that the use of high frequency currents might provide improved results and were proved correct. However, $Bovie^{(R)}$ electrosurgical unit may also be used in percutaneous medial branch neurotomy if a lesion made at a point or the dorsal surface of the transverse process just caudal to the most medial end of the superior edge of the transverse process (Bogduk's method). At this point the medial branch lies on the bone and its depth and medial displacement are defined by the bone which precludes the need for lateral radiographs to check placement. A lesion was made at same target point using the $Bovie^{(R)}$ electrosurgical unit in a 41 year male patient who had received a Kaneda operation because of L2 compression fracture. The patient was relieved of pain without any adverse effects.

• 보존과학회지
• /
• 제32권4호
• /
• pp.561-570
• /
• 2016

이 연구는 심곡사칠층석탑의 해체와 재조립에 3차원 영상분석 기법을 적용하여 원형에 가깝게 보수한 기술적 사례로써 의미가 있다. 석탑의 해체와 재조립 과정에서 전체적인 변형상태와 변위를 분석하였으며 구조적 안정성 검토를 통하여 재조립에 따른 변형을 최소화하였다. 또한 석탑의 원위치도 재검토하여 보수에 적용하였다. 재조립에 앞서 오염된 석재의 표면은 과학적 표면세정을 통해 이끼류와 지의류 등을 제거하였고, 석탑의 지반은 강회를 이용한 판축과 유사한 형식으로 다짐하여 보강하였다. 이 결과는 석탑의 해체와 재조립 과정에 중요한 자료로 활용될 수 있을 것이다.

• 대한치과보철학회지
• /
• 제33권1호
• /
• pp.48-74
• /
• 1995

Since heat curing acrylic resins undergo unavoidable dimensional changes following polymerization, adaptation can be altered. Until recently, although numerous studies on the dimensional changes of denture base were based on a microscopic technic that measures the relative displacement of a limited reference points on the denture base, but there have been few studies on the distortions of resins using holographic interferometry. Purpose of this study was to determine and compare the dimensional changes and fringe patterns of 4 heat curing acrylic resins, and observe the distortions of acrylic resin denture base by temperature change with the aid of the holographic interferometry. Holographic interferograms were taken on the resin specimens and acrylic resin denture base with the 10mW He-Ne laser and double exposure method. Comparison and analysis of fringe pattern on the recorded object surface was performed. The following results were obtained. 1. The dimensional changes for the high impact resin Lucitone 199 were statistically the greatest of all resins, and the rapid heat curing resin Premium super 20 were the least. 2. The most polymerization shrinkage of all materials occured in initial period of measurements, at this time the difference of polymerization shrinkage properties between resins was founded. 3. The stress distribution of specimens was seen by various type of fringe pattern which had directionality. 4. The polymerization shrinkage of resins was greatly influenced by temperature change. 5. The partial deformations of resin denture base were observed in 70 C and 90 C water.

• 한국세라믹학회지
• /
• 제35권1호
• /
• pp.23-32
• /
• 1998

전융실리카 분말로 소결하여 만든 sihca preform을 마그네슘이 함유된 용융 알루미늄에 침적시킨후 공기중에서 반응시켜 Al2O3/Al 복합체를 제조하였다. 복합체 제조시 반응온도의 변화에 대해 용융 알루미늄의 침투거동을 조사한 결과 3가지 영역, 즉 저온영역(75$0^{\circ}C$-85$0^{\circ}C$), 중온영역(90$0^{\circ}C$-95$0^{\circ}C$), 고온영역(100$0^{\circ}C$$\leq$)으로 구분되었다. 저온영역에서는 반응온도에 비례해서 침투속도가 증가하였으나, 중간온도 영역은 치환반응에 의해 생성된 알루미나의 상전이에 따른 영향으로 저온영역인 85$0^{\circ}C$에서보다 오히려 침투속도가 감소하였다. 고온영역중 100$0^{\circ}C$이상에서 침투가 일어나지 않는 것은 용융 알루미늄중의 마그네슘이 먼저 실리카와 반응하여 silica preform의 표면에 치밀한 스피넬층을 형성하기 때문으로 판명되었다.

• 한국지반공학회논문집
• /
• 제15권3호
• /
• pp.113-129
• /
• 1999

본 연구에서는 사질토 지반에서의 굴착단계별 연성 벽체의 거동분석을 수행하기 위해 흙막이벽의 모형실험을 실시하였다. 모형 흙막이벽 실험에서는 재료의 역학적 특성이 비교적 널리 알려진 주문진 표준사를 이용하여 상대밀도가 79%, 41%, 24%인 모형지반을 조성한 후 모형벽체의 연성지수를 변화시켜 각 굴착단계별로 배면지반과 연성 벽체의 거동특성을 규명하였다. 본 연구에서는 벽체의 수평변위, 벽체의 배면에 작용하는 수평토압, 굴착으로 인한 배면지반의 침하량 및 침하영향거리, 벽체에 작용하는 앵커의 하중, 그리고 벽체에 작용하는 휨모멘트와 축력에 대해 굴착단계에 따라 살펴보고 이를 토대로 지반과 벽체의 거동특성을 분석하였다.

• 한국전산구조공학회논문집
• /
• 제16권4호
• /
• pp.431-437
• /
• 2003

본 연구에서는 순차 설계영역 (SDD： sequential Design Domain) 개념을 사용한 GUI(Graphic User Interface)환경 프로그램을 개발하였다. 본 프로그램은 상용프로그램인 ANSYS와 최적설계 프로그램인 PLBA(Pshenichny-Lim-Belegundu-Arora)를 연결하고 비주얼 베이직을 이용하여 GUI환경에서 사용자가 초기값과 입력파일을 작성하고 결과를 확인할 수 있도록 하였다. 프로그램의 신뢰도를 검증하기 위해서 3부재 및 5부재 트러스 구조물을 수치예제로 선정하여 해석하였다.