Mechanical behavior of the composite curved laminates in practical applications |
Liu, Lonquan
(School of Aeronautics and Astronautics, Shanghai Jiao Tong University)
Zhang, Junqi (School of Aeronautics and Astronautics, Shanghai Jiao Tong University) Wang, Hai (School of Aeronautics and Astronautics, Shanghai Jiao Tong University) Guan, Zhongwei (School of Engineering, University of Liverpool) |
1 | Herrington, P.D. and Sabbaghian, M. (1991), "Factors affecting the friction coefficients between metallic washers and composite surfaces", Compos., 22(6), 418-424. DOI |
2 | Hibbitt, D., Karlsson, B. and Sorensen, P. (2011), ABAQUS documents (version 6.10), Dassault Systemes Simulia Corporation, Providence, RI, USA. |
3 | Joh, D. (1990), "A semi-micromechanic interlaminar strain analysis on curved-beam specimens", NASA Contactor report-NASA CR; 189512. |
4 | Lekhnitskii, S.G. (1987), Anisotropic Plates, (3rd Edition), Gordon and Breach Science Publishers, New York, NY, USA. |
5 | Lin, K.C and Hsieh, C.M. (2007), "The closed form general solutions of 2-D curved laminated beams of variable curvatures", Compos. Struct., 79(4), 606-618. DOI |
6 | Lin, K.C. and Hsieh, C.M. (2011), "Finite deformation of 2-D laminated curved beams with variable curvatures", Int. J. Non-Linear Mech., 46(10), 1293-1304. DOI |
7 | Mechanical Properties of CYCOM(R) 977-2-35%-24KIMS-198-600, Technical Service Cytec Engineered Materials. |
8 | Miao, Y., Li, J., Gong, Z., Xu, J., He, K., Peng, J. and Cui, Y. (2013), "Study on the effect of cure cycle on the process induced deformation of cap shaped stiffened composite panels", Appl. Compos. Mater., 20(4), 709-718. DOI |
9 | Military Handbook--MIL-HDBK-5F (2003), Metallic Materials and Elements for Aerospace Vehicle Structures, Department of Defense, USA. |
10 | Ng, S.P., Tse, P.C. and Lau, K.J. (2001), "Progressive failure analysis of 2/2 twill weave fabric composites with moulded-in circular hole", Compos. Part B-Eng., 32(2), 139-152. DOI |
11 | Nguyen, T. (2010), "Effects of curvature on the stresses of a curved laminated beams subjected to bending", Master thesis, The University of Texas at Arlington, Arlington, TX, USA. |
12 | Padhi, G.S., McCarthy, M.A. and McCarthy, C.T. (2002), "BOLJAT: a tool for designing composite bolted joints using three-dimensional finite element analysis", Compos. Part A, 33, 1573-1584. DOI |
13 | Rosales-Iriarte, F., Fellows, N.A. and Durodola, J.F. (2012), "Failure prediction in carbon compression subjected to bearing versus bypass loading", J. Compos. Mater., 46(15), 1859-1878. DOI |
14 | Shimizu, T. and Abe, T. (2013), "Tool material effects on process induced deformation of composite spar structures", Proceedings of the 19th International Conference on Composite Materials, Montreal, Canada, August, pp. 1003-1010. |
15 | Sorrentino, L. and Bellini, C. (2013), "Numerical study of compaction influence on spring-in of thin composite components manufactured by vacuum bag process", Proceedings of the 19th International Conference on Composite Materials, Montreal, Canada, August, pp. 9095-9103. |
16 | Sun, J., Gu, Y.Z., Li, M., Li, Y.X. and Zhang, Z.G. (2013), "Relationship between slipping friction prepreg stacks and forming quality of hot diaphragm formed c-shaped thermosetting composite laminates", Proceedings of the 19th International Conference on Composite Materials, Montreal, Canada, August, pp. 3066-3075. |
17 | Wan, Y., Goto, T., Matsuo, T., Takahashi, J. and Ohsawa, I. (2013), "Investigation about fracture mode and strength in curved section of carbon fiber reinforced polypropylene", Proceedings of the 19th International Conference on Composite Materials, Montreal, Canada, August, pp. 6695-6702. |
18 | ASTM Committee (2007), ASTM D 6415/D 6415M-06: Standard test method for measuring the curved beam strength of a fiber-reinforced polymer-matrix composite. |
19 | Chang, F. and Springer, G.S. (1986), "The strength of fiber reinforced composite bends", J. Compos. Mater., 20(1), 30-45. DOI |
20 | Cui, W.C., Liu, T., Len, J.X. and Ruo, R. (1996), "Interlaminar Tensile Strength (ILTS) measurement of woven glass/polyester laminates using four-point curved beam specimen", Compos. Part A, 27(11), 1097-1105. DOI |
21 | Wimmer, G., Kitzmuller, W., Pinter, G., Wettermann, T. and Pettermann, H.E. (2009), "Computational and experimental investigation ofdelamination in L-shaped laminated composite components", Eng. Fract. Mech., 76(18), 2810-2820. DOI |
22 | Wisnow, M.R., Petrossian, Z.J. and Jones, M.I. (1996), "Interlaminar failure of unidirectional glass/epoxy due to combined through thickness shear and tension", Compos. Part A, 27(10), 921-929. DOI |
23 | Ye, L. (1988), "Role of matrix resin in delamination onset and growth in composite laminates", Compos. Sci. Technol., 33(4), 257-277. DOI |
24 | Lin, C.W. (2010), "Finite deformation of 2-D thin circular curved laminated beams", Hsiuping J., 22, 19-34. |
25 | Mukundan, S. (2003), "Structural design and analysis of a lightweight composite sandwich space radiator panel", Master Thesis; Mechanical Engineering, Texas A&M University, TX, USA. |
26 | Roos, R. (2008), "Model for interlaminar normal stress in doubly curved laminates", Ph.D. Dissertation; Swiss Federal Institute of Technology, Zurich, Swiss. |