• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.31-32
• /
• 2023

Recently, with the digitalization of the construction industry, free-form building construction technology is developing. However, the technology for manufacturing free-form concrete panels is still insufficient. In this study, the surface error of the FCP according to the thickness of the lower silicon plate, which is a component of the existing lower multi-point press, was analyzed in order to manufacture a precise FCP. As a result of the analysis, it was found that the thinner the thickness, the larger the error value. These results can be used as a basis for existing research and are expected to be used for research on high-quality FCP manufacturing technology.

• 한국수자원학회논문집
• /
• 제45권12호
• /
• pp.1227-1241
• /
• 2012

본 연구에서는 목자판과 수면이 포함되어 있는 시차를 가진 두 영상에 대해 직사각형 검사영역을 설정하고 그 상관계수를 분석하여 수면을 판단하는 새로운 수면인식 기법을 제안하였다. 상관계수의 수직적인 값들로부터 임계치, 첨두값, 기울기, 분산비 등 4가지 방법을 이용하여 수면의 위치를 판정하였다. 흔들림 등으로 인해 두 영상의 위치가 불일치하여 생기는 문제를 제거하기 위해 추가로 영상의 흔들림을 보정하는 알고리즘과 통계적 필터링 기법을 적용하였다. 저수시에 촬영한 28개 지점의 영상에 개발한 수면 인식 방법을 적용하였다. 이 방법으로 계산한 수면은 목측 수면과의 평균상대오차가 3.4~5.7 cm 정도로 나타났다. 수면의 요동이 있을 경우, 이 방법은 기존 방법을 보완하여 영상수위계의 수위 측정성능을 높이는데 활용될 수 있을 것이다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 지반공학 공동 학술발표회
• /
• pp.510-516
• /
• 2005

This research aims to verify the stress distribution in soil according to the composition of the soil layer in case of surface loading. For this purpose, loading tests with measurement of stresses in the soil on four kinds of layered model ground in laboratory were performed. Those are (1)homogeneous sand, (2)gravel underlain by sand, (3)sand underlain by clay and (4)gravel underlain by clay. Test results are compared and analysed for the compositions of the soil layers. based on the results obtained, it is found that the larger the difference of the strengths of upper and lower layer is, the smaller the stress in the soil in case of surface loading is.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2003년도 학술.기술논문발표회
• /
• pp.7-11
• /
• 2003

This study investigate the hydration heat history with variation of surface insulating material in cold weather concreting. According to the results, the temperature of concrete lowers below zero in 24hours, so early frost damage occurs in the case of exposure and 1 fold bubble sheet, but the lowest temperature keeps above zero, so a adiabatic effect is very favorable in the case of double bubble sheet and 부직포. Compressive strength of core specimen at 7 and 28 days is highest In the case of double bubble sheet and 부직포. But, considering convenience of construction and economical efficiency, it is thought that the most effective surface insulating material is 1 fold bubble sheet +blanket.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2005년도 추계 학술논문 발표대회
• /
• pp.93-96
• /
• 2005

Concrete has been considered as a semi-permanent structural material, because its excellent durability. Recently, durability decline of concrete construction by environmental pollution is becoming social problem. The durability of high durable structure is declined by carbonate, chloride permeation and deterioration of waterproof performance, etc. This study of penetrating surface protection materials evaluated about carbonation, chloride permeation, waterproof performance, and durability of abrasion, etc. It is profitable in durability that spread penetrating surface protection materials

• 한국건축시공학회지
• /
• 제11권6호
• /
• pp.557-566
• /
• 2011

The surfactants facilitate the formation of foam bubbles under a proper condition and provide stability of foam bubbles by decreasing the surface tension of solutions and increasing the viscosity of foam surface. However, there have been almost no practical data of foam concrete in this regard so far. This study aims to understand the effects of foaming agents such as anionic synthetic surfactant and anionic natural material surfactant on the low density foamed concrete. From the experiment, the vegetable soap of anionic natural material surfactants showed a higher foaming rate, more open pores, slightly lower compressive strength, and a higher permeability coefficient compared to the vegetable soap of anionic synthetic surfactants. It is believed that the natural material surfactants make not only the surface tension of the solution low but also the viscosity of slurry high.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(I)
• /
• pp.491-494
• /
• 2005

This study was carried out to examine application of surface adiabatic curing method in slightly cold weathering period. So, early aged freezing damage and compressive strength of concrete were examined through temperature analysis of construction concrete. Temperature analysis was carried out according to the average temperature, concrete placement completion time and surface adiabatic curing method. Analysis results show that additional curing plans are demanded in concrete construction below 0$^{circ}C$, surface adiabatic curing method is could apply in the average temperature more than -2$^{circ}C$ and curing method as heating are needed under -2$^{circ}C$.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 추계 학술논문 발표대회
• /
• pp.80-81
• /
• 2013

There is the increasing number of constructing soil or structure on the soft ground during public works. Usually cement or slag cement has been the traditional material for surface soil stabilization method. Recently, early strength development properties of hardening agent is required for driving abilities of execution equipment and shortening of the construction time. Therefore, the purpose of this study is to develop the early compressive strength hardening agent for surface soil stabilization. The study was confirmed performance and availability of hardening agent using early strength type cement and industrial by-product minerals through early strength development properties in accordance with water cement ratio, content of hardening agent for soft soil.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 춘계 학술논문 발표대회
• /
• pp.201-203
• /
• 2012

The establishment of the technology for evaluating friction resistance and pipe pressure and the relation of the fluid characteristics and pumpability of concrete is essential for the evaluation of concrete pumping performance for high speed construction of super-tall building. So, this study focuses on quantitative evaluation of concrete fluid characteristics and surface friction resistance under the change of concrete mix proportion and pumping condition. In this study, we measured the rheology of concrete and pipe pressure and surface friction characteristics when pumping. And, relations between the rheology characteristics of concrete and pumping performance was investigated by experiment. As the result of the experiment, high regression between the surface friction and pressure gradient was confirmed. And, prediction model to evaluate the friction resistance coefficient and pipe pressure reduction coefficient was suggested.

• 한국강구조학회 논문집
• /
• 제20권1호
• /
• pp.93-104
• /
• 2008

국내 시공 중인 현수교의 시공단계에 대한 신뢰성 해석을 통한 위험성 평가를 실시하였다. 본 논문의 주요 연구목표는 (1) 현수교주케이블 소선의 파단에 대한 신뢰성 해석, (2) 보강형 거더 가설 28단계에 대한 위험단계 결정, (3) 보강형 거더 가설중 시공관리에 대한 한계상태의 신뢰성 평가이다. 기존의 현수교에 대한 연구와 설계는 주로 경험적인 데이터에 의존해 왔으나 최근 조사된 자료에 의하면 교량의 완공 전에 발생하는 사고의 원인의 80%는 인간의 오류, 계획, 설계, 재료 및 하중의 불확실성과 관련되어 있다. 교량의 완성계에 대해서는 많은 연구가 수행되어왔으나 시공중의 불확실성에 대해서는 시방서나 지침 등으로 정리되어 있지 않은 부분이 많다. 개선된 선형 적 용적 응답면기법을 사용하여 예제교량의 시공단계에 대한 위험성 평가를 하였다.