• Journal of electromagnetic engineering and science
• /
• 제6권2호
• /
• pp.110-116
• /
• 2006

A reflective array type surface acoustic wave(SAW) dispersive delay line(DDL) with high time-bandwidth at the V/UHF-band is designed and fabricated for compressive receiver applications. This type of the SAW DDL has the properties of the relative bandwidth of 20 %, the time delay of 49.89 usec, the insertion loss of 38.5 dB and the side lobe rejection of 39 dB. In comparison with a commercial SAW DDL, the insertion loss, amplitude ripple and side lobe rejection are improved by $1.5dB{\pm}0.6dB$ and 4 dB respectively. Using the fabricated SAW DDL, the prototype of the compressive receiver is developed. It is composed of RF converter, fast tunable LO, chirp LO, A/D converter, signal processing unit and control unit. This prototype system shows a fine frequency resolution of below 30 kHz with high scan rate.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.79-83
• /
• 2014

In this paper, SAW devices are fabricated using various IDT shape(Single/Double) to check an effect of the IDT on SAW device. And based on theory of a particle velocity moved by SAW and IDT, a particle velocity is measured and calculated. Depend on insert power, a particle velocity using Single-IDT SAW device is about two times bigger than Double-IDT SAW device and it's almost same with a theoretical different.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 전기.전자공학 학술대회 논문집(II)
• /
• pp.841-844
• /
• 1987

In this paper we describe a planar type SAW(surface acoustic wave) FM discriminator, in which a 3 dB multistrip coupler is used to keep the linearity of wideband FM discrimination. This discriminator without 3 dB multistrip coupler is also applicable to DPSK demodulation.

• 한국음향학회지
• /
• 제35권6호
• /
• pp.473-479
• /
• 2016

본 연구는 센서 표면에 고정된 티오에스터 분자와 금 나노입자를 이용하여 수용액 중의 시안화이온(cyanide)을 선택적이고, 고민감도로 검출할 수 있는 200 MHz 표면음향파(Surface Acoustic Wave, SAW) 센서의 개발에 관한 것이다. SAW 센서표면에 형성된 티오에스터 단분자막은 시안화이온의 친핵성 첨가반응에 의해 가수분해되어 티올(thiol)이 만들어지고, 티올 분자는 다시 금 나노입자와 반응에 의해 티올-금 나노입자 복합체를 형성한다. 이후 신호증폭을 위해, gold(III) chloride trihydrate와 hydroxylamine hydrochloride 조합에 의한 금 나노입자의 사이즈 확대반응을 수행하였다. SAW 센서는 수용액 중에서 시안화이온에 대한 검출 능력이 17.7 uM이었으며, 공진주파수 변화량은 시안화이온의 농도가 커지면서 포화되는 현상을 보여주었다. 한편, 제작된 SAW 센서는 시안화이온 이외의 플루오라이드(fluoride), 아세테이트(acetate), 그리고 설페이트(sulfate) 이온 등의 다른 음이온에는 전혀 반응성이 없었으며, 다른 음이온에 의한 간섭현상도 나타나지 않았다. 끝으로 모든 실험은 재현성 있는 실험 결과를 얻기 위해서 자체 제작한 유체제어 모듈과 센서를 이용하여 진행하였다.

• 센서학회지
• /
• 제10권2호
• /
• pp.142-147
• /
• 2001

인터디지털 표면음파 변환기의 교차장 모델에 기초한 전송선 등가회로를 사용하여 SPICE에 의한 SAW 필터의 효율적인 시뮬레이션 기법을 제안하였다. 표면음파의 전파를 전송선으로 모델하므로 인터디지털 변환기의 등가회로에서는 주파수 의존 회로소자가 필요하지 않게 된다. 그래서 주파수 의존 회로소자에 대한 등가회로를 근사적으로 구하지 않아도 되고, 필터의 등가회로에 작은 수의회로소자를 사용하므로 시뮬레이션 시간도 많이 단축된다. 삽입손실, 입력 어드미턴스, 통과대역 리플, 그리고 고조파 주파수 응답과 같은 SAW 필터 특성에 대한 시뮬레이션을 통하여 제안된 기법의 유용성을 보였다.

• 대한전자공학회논문지SD
• /
• 제45권4호
• /
• pp.64-71
• /
• 2008

SAW(Surface Acoustic Waves)를 기반으로 passive RFID(Radio Frequency IDentification) tag 및 송수신 시스템을 제작하였다. Pulse position encoding 방식의 SAW ID 태그(tag)를 제작하여 amplitude on/off 방식의 SAW ID 태그에 비해 3배의 데이터 용량 증대 효과를 얻을 수 있었다. 또한, 수신 시스템을 heterodyne 방식과 direct conversion 방식으로 제작하였다. 측정 결과 direct conversion 방식으로 제작된 수신 시스템이 heterodyne 방식의 수신 시스템과 비교하여 isolation 특성이 10 dB 증가하였으며, 그 결과 무선 도달 거리가 증가했다.

• 한국정밀공학회지
• /
• 제23권4호
• /
• pp.139-145
• /
• 2006

This paper presents the design and manufacturing of a sensor using SAW and delay line in order to measure temperature. SAW sensors having single and double electrodes are manufactured on the $128^{\circ}YX-LiNbO_3$ substrate, and its process is addressed. Before manufacturing, the device is simulated using a commercial finite element program. The frequency responses of the saw sensor on the temperature change is measured. Since the center frequency on the temperature change from $-30^{\circ}C$ to $80^{\circ}C$ is linearly changed, the saw sensor is applicable to measure the temperature change or strain variation.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
• /
• pp.140-144
• /
• 2003

To investigate failure analysis of surface acoustic wave (SAW) filter for radio frequency, high temperature storage test was carried out. The failure criteria were insertion loss at passband and rejection level at stopband. As a result, the insertion loss at passband increase about 4 dB was due to damages of interdigital transducer (IDT). That is caused by poor adhesion between metal electrode(AI) and piezoelectric substrate and defects on a manufacturing process. This result indicates that good adhesion between electrode and ceramic substrate is important factor And also we investigated the demage factors of electrode. Screen possible of saw filter using high temperature storage test(HTOL) in the manufacturing phase be presented.

• 한국전기전자재료학회논문지
• /
• 제14권5호
• /
• pp.435-443
• /
• 2001

As power durable RF SAW filters, AL-(0∼2wt%)Cu alloy multi-layered thin electrodes were deposited on 42° LiTaO$_3$ piezoelectric substrates by magnetron sputtering process, and then ladder-type RF SAW filters, satisfying the electrical specification of CDMA transmission band, were fabricated through optimizing SAW resonator structures. The temperature of film electrodes in SAW filter was increased with RF power, and reached the maxima to cause a failure of SAW filters at the cut-off frequencies of the RF filter band. As RF power increases, the electrodes of Al-Cu alloy showed higher power durability than that of pure Al. The multi-layer laminated film of Al-1wt.% Cu/Cu/Al-1wt%Cu resulted in the best power durability up to 4W of RF power. Every film electrode, however, was destroyed within seconds whenever applying a critical RF power to SAW filters, regardless of the composition and structure of film electrodes. The breakdown of film electrodes under FR power seems to believe due to the fatigue of electrodes caused by repetitive cyclic stress of surface acoustic wave, which is amplified as RF power increases.

• 한국가시화정보학회지
• /
• 제21권3호
• /
• pp.93-100
• /
• 2023

The yeast Saccharomyces cerevisiae (S. cerevisiae) is considered an ideal eukaryotic model and has long been recognized for its pivotal role in numerous industrial production processes. Depending on the cell cycle phases, microenvironment, and species, S. cerevisiae varies in shape and has different sizes of each shape such as singlets, doublets, and clusters. Obtaining high-purity populations of uniformly shaped S. cerevisiae cells is crucial in fundamental biological research and industrial operations. In this study, we propose an acoustofluidic method for separating S. cerevisiae cells based on their size using surface acoustic wave (SAW)-induced acoustic radiation force (ARF). The SAW-induced ARF increased with cell diameter, which enabled a successful size-based separation of S. cerevisiae cells using an acoustofluidics device. We anticipate that the proposed acoustofluidics approach for yeast cell separation will provide new opportunities in industrial applications.