• The Journal of Korean Academy of Prosthodontics
• /
• v.44 no.1
• /
• pp.51-62
• /
• 2006

Purpose: The purpose of this study was to evaluate the pattern and the magnitude of stress distribution in the supporting tissues surrounding three different types of implants(ITI, 3i. and Bicon implant system) Material and method: Photoelastic models were made with PL-2 resin(Measurements Group, Raleigh, USA) and three implants of each kind were placed in the mandibular posterior edentulous area distal to the canine. For non-splinted restorations, individual crowns were fabricated on three titanium abutments. For splinted restorations, 3-unit axed partial dentures were fabricated. Photoelastic stress analyses were carried out to measure the fringe order around the implant supporting structure under simulated loaded conditions(15 lb. 30 lb). Conclusion: The results were as follows; 1 Regardless of the implant design, stresses were increased in the apex region of loaded implant when non-splinted restorations were loaded. While relatively even stress distribution occurred with splinted restorations. Splinting was effective in the second implant. 2. Strain around Bicon implant were lower than those of other implants, which confirmed the splinting effect. The higher the load, the more the stress occurred in supporting tissue, which was most obvious in the Bicon system. 3. Stress distribution in the supporting tissue was favorable in the ITI system. while the other side of 3i system tended to concentrate the stress in some parts.

• Journal of Korean Physical Therapy Science
• /
• v.25 no.3
• /
• pp.53-60
• /
• 2018

Purpose : The purpose of this study is to examine the Effect of Lunge Exercise on the Balance of Stable and Unstable Supporting surface. Method : The experimenter was a healthy twenties male and female. The period was two weeks, divided into a stable group and a unstable group. Setting the holding time 4 sec 3 sets of 10 times using the Stable and Unstable Supporting Surfaces. The break time was set at one minute for each set. Balance cushions were used for unstable supporting surfaces. Results : After Lunge Exercise, Both groups had an impact on improving their ability to balance. Conclusion : There has not been much change in the ability to balance the stable and Unstable Supporting Surfaces. However, considering surface conditions, the pre and post exercise comparisons had an effect on improving the ability to balance.

• Proceedings of the Korea Technology Innovation Society Conference
• /
• 2015.11a
• /
• pp.151-157
• /
• 2015

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.10
• /
• pp.2715-2720
• /
• 2009

Supporting Quality of Service (QoS) for multimedia services in heterogeneous mobile networks is a part of key issue for Three Generation Evolution (3GE) development. A QoS management structure needs to guarantee the QoS of moving users based on an end-to-end negotiation to support the seamless service when MT is moving between the heterogeneous networks. We propose an end-to-end negotiation method based on SLA(Service Level Agreement). For this aim, the SLA control and algorithm for supporting MT's QoS is considered. Simulation is focused on the average delay and packet loss rate, and the results show that our proposed method provides mobile terminals with the optimal performance.

• Geomechanics and Engineering
• /
• v.16 no.1
• /
• pp.59-69
• /
• 2018

This study focused on the mechanical and hydraulic characteristics of underwater tunnels based on Mohr-Coulomb (M-C), Hoek-Brown (H-B) and generalized H-B failure criteria. An improved approach for calculating stress, displacement and plastic radius of the circular tunnel considering hydraulic-mechanical coupling was developed. The innovation of this study was that the radius-incremental-approach was reconstructed (i.e., the whole plastic zone is divided into a finite number of concentric annuli by radius), stress and displacement of each annulus were determined in terms of numerical method and Terzaghi's effective stress principle. The validation of the proposed approach was conducted by comparing with the results in Brown and Bray (1982) and Park and Kim (2006). In addition, the Rp-pin curve (plastic radius-internal supporting pressure curve) was obtained using the numerical iterative method, and the plastic radius of the deep-buried tunnel could be obtained by interpolation method in terms of the known value of internal supporting pressure pin. Combining with the theories in Carranza and Fairhurst (2000), the improved technique for assessing the reliability of the tunnel support was proposed.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.11b
• /
• pp.155-180
• /
• 2000

The pattern of domestic slope construction has been steadily changed from the simpled and small-scale to the large-scale and complicated one, frequently near the existing structures, as the density of population and the traffic increases. In some cases, the slopes become steeper and larger due to the road improvement and construction. For the rock slope, the existence of discontinuity cannot be disregarded and acts as an important factor on the slope stability. Most of the existing methods for stabilizing the slope were focused on reducing the slope angle. Under the specific geographic condition, it is necessary to concentrate more efforts on the research and development of supporting system for the slope stability. As a supporting system, it is often very advantageous to use the FRP pipe grouting method that is similar to the existing soil nailing method or the rock bolting method but uses the high strength FRP pipe as a principal reinforcement in place of steel bar. Through the FRP pipe, the grout material can be injected into the rock mass to improve its shear strength to the required value. .In this study, the characteristics of FRP are investigated by the laboratory tests and the field tests. And, the practical aspects of FRP method are reviewed and analyzed.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.22 no.1
• /
• pp.73-79
• /
• 2009

In this paper, the structural analysis and optimization of the door supporting rail structure in the header box located at the top of the aluminum passenger safety door(PSD) at the subway station, which opens and closes regularly, is performed. In case the simple fixed boundary condition is used for the bolt fixture on the supporting rail where the glass door is moving, excessive stresses are obtained. Therefore, more realistic finite element modeling of the bolts is used at the bolt fixture in the whole structure in order to obtain the more physically acceptable FEM results. As a result, fatigue life of twenty years of the structure is obtained to satisfy the design object. Also the optimal design of cross section of the rail part is performed using the response surface method and 15% of weight of the supporting rail part on the door is reduced.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.517-520
• /
• 2008

Wireless sensor network supporting healthcare environment should provide customized service in accordance with context information such as continuous location change and status information for people or movable object. In addition, we should consider data transmission guarantees a person's bio information and privacy security provided through sensor network. In this paper analyzes LEACH protocol which guarantees the dynamic self-configuration, energy efficiency through configuration of inter-node hierarchical cluster between nodes and key distribution protocol used for security for data transmission between nodes. Based on this analysis result, we suggested self-configuration routing protocol supporting node mobility which is weakness of the existing LEACH protocol and data transmission method by applying key-pool pre-distribution method whose memory consumption is low, cluster unit public key method to sensor node.

• The Journal of the Korea Contents Association
• /
• v.12 no.7
• /
• pp.114-122
• /
• 2012

Local company which has excellent patent technique is required design development for sales growth and enhancement of market competitiveness. For the solution about this requirement of small and medium company, the patent office and Chooncheognbukdo are jointly progressing the value consideration business of local design, and the design is improved through this. This study is to show the illustration of the design developed by business process of V company for 'the development of external design of LED LAMP fitted into the environment in tunnel' as a project ordered by S company, and the improvement patent was created with simulation development in considering design recognition of supporting company and the competitiveness of the product by successful performance of the external design development based on patent technique. Through the effective change method of LED LAMP in tunnel and the suggested result of LED LAMP reflection method, the beneficiary company has progressed the corporate body from the individual business, and at present the primary product was completed by securing manufacturing basis facilities for manufacturing and sales. Local small and medium company became a strong design company by connecting design development supporting business through the supporting method of the fusion of design and patent.

• Resources Recycling
• /
• v.10 no.4
• /
• pp.18-23
• /
• 2001

Air pollutants, phenol was generated in case of thermal regeneration of used activated carbon loaded with phenol and because of this problem, removal process of phenol were studied. Electrolytic oxidation of samples, used S.company granular activated carbon (WS-GAC), used C.company granular activated carbon (WC-GAC) and used L.company granular activated carbon (WL-GAC) loaded with phenol carried out by potentiostatic method in this study. In case of experiment was to come into operation in condition of samples containing 100 mg/g phenol, supporting electrolyte was 1.0% sodium chloride solution, Ti-Ir (10$\times$10$\textrm{cm}^2$) electrode and electrode distance was 2 cm, current density was $1.25 A/dm^2$, Obtained from the results of electrolytic oxidation experiments were not detected residual phenol. And then we knew about reaction time of electrolytic oxidation, current density, concentration of supporting electrolyte and electrode and electrode distance were 60 minutes, 1.25 A/dm$^2$, 1.0%, 2 cm.