• 한국지구과학회지
• /
• 제23권1호
• /
• pp.87-96
• /
• 2002

Aeromagnetic and gravity data were analyzed to delineate the subsurface structure of the Yeongdong basin and its related fault movement in the Okcheon fold belt. The aeromagnetic data of the total intensity (KIGAM, 1983) were reduced to the pole and three dimensional inverse modeling, which considers topography of the survey area in the modeling process, were carried out. The apparent susceptibility map obtained by three dimensional magnetic inversion, as well as the observed aeromagnetic anomaly itself, show clearly the gross structural trend of the Yeongdong basin in the direction on between $N30^{\circ}E$ and $N45^{\circ}E$. Gravity survey was carried out along the profile, of which the length is about 18.2 km across the basin. Maximum relative Bouguer anomaly is about 7 mgals. Both forward and inverse modeling were also carried out for gravity analysis. The magnetic and gravity results show that the Yeongdong basin is developed by the force which had created the NE-SW trending the magnetic anomalies. The susceptibility contrast around Yeongdong fault is apparent, and the southeastern boundary of the basin is clearly defined. The basement depth of the basin appears to be about 1.1 km beneath the sea level, and the width of the basin is estimated to be 7 km based on the simultaneous analysis of gravity and magnetic profiles. There exists an unconformity between the sedimentary rocks and the gneiss at the southeastern boundary, which is the Yeongdong fault, and granodiorite is intruded at the northwestern boundary of the basin. Our results of gravity and magnetic data analysis support that the Yeongdong basin is a pull-apart basin formed by the left-stepping sinistral strike-slip fault, which formed the Okcheon fold belt.

• 대한통합의학회지
• /
• 제8권2호
• /
• pp.97-107
• /
• 2020

Purpose : The purpose of this study is to investigate the effect of squat exercise using a ball on the gap between knees and Q angle of a subject with a genu-varum, and to prove the effect, to provide a clinical basis for developing into a knee correction exercise program. Methods : As a result of posture measurement through GPS, 26 female with genu-varum with a knee length of 5 cm or more were studied. The group was randomly assigned to 13 squat exercise group using ball (experimental group) and 13 general squat exercise groups (control group). The experimental group placed the ball between both knees in a position where the distance between both feet was slightly wider than the shoulder width on a flat support surface, and fixed the ball, and then squat with the start signal. The control group squats without a ball. Each group performed three sets of exercise three times a week for six weeks. Before their exercise, after three and six weeks, EMG, GPS, digital goniometer measurement, the vastus medialis (VM), the vastus lateralis (VL), and the Q-angle were measured in the squat exercise posture. EMG was measured in squat exercise posture. Results : The distance between the knees was reduced. EMG is activated in group A, the group B experimental results showed the high activity of the VL. Q-angle had increased. But the experimental group increased more than the control group. Conclusion : We have confirmed through our experiments that the distance interval between the knees during squat exercises using a ball can be reduced. Furthermore, it would also be helpful to ensure the treatment of genu-varum.

• 한국자동차공학회논문집
• /
• 제24권4호
• /
• pp.463-470
• /
• 2016

In this paper, the characteristics analysis of LMD track, such as including track structure, track wear resistance and track thickness, were analyzed to enhance the deposition efficiency using a diode-pumped disk laser. SKD61 hot work steel plate and Fe based AISI M2 alloy were used as a the substrate and powder for the LMD process, respectively. The laser power, track pitch and powder feed rate among LMD parameters were adopted to estimate the deposition efficiency. As the laser power is increased, heat input and melting pool on the substrate is grown also increases, so resulting in the increased LMD track thickness was increased. Through EPMA mapping analysis of the cross-section in the LMD track, it was observed that all the elements are evenly distributed inside. Therefore, the entire hardness in the LMD track is expected to be almost uniform regardless of location. The characteristics of the LMD specimen were excellent compared to the STD11 specimen in terms of the wear track width and the wear rate as well as the coefficient of friction. Especially the wear rate of LMD specimen has been significantly reduced by 60 % or more. From Based on the experimental results, the prediction formula of LMD thickness was calculated by using laser power, track pitch and powder feed rate.

• 대한치과의사협회지
• /
• 제54권10호
• /
• pp.811-819
• /
• 2016

범안면골 골절은 안면부 손상 그 자체로도 치료가 까다롭고 어렵지만, 동반된 다른 신체 중요 장기의 손상 등과 함께 치료 후 에도 남을 수 있는 안면의 심미적, 기능적 문제들 때문에 더욱 치료가 힘들어 질 수 있다. 뇌손상 등의 중요 장기 손상으로 인해 수술이 빠른 시일 내에 시행되지 못할 때에는 관련 의학분과와의 긴밀한 협진 하에 수술 전 처치가 이루어질 수 있도록 하여야 하며, 연조직을 포함한 골절편 등 안면 구조물들이 손상되지 않고 전체적인 형태를 유지할 수 있도록 응급 처치가 되어야 한다. 3D CT 등의 영상진단을 통해 안면골 골절을 치료하기 위한 전체적인 계획을 수립해야 한다. 이 계획에는 수술을 위한 기도확보 방법, 골절의 정복 고정 순서, 접근 방법, 안구, 코 등의 재건 방법 그리고 연조직에 손상에 대한 처치가 포함된다. 수술 시에는 환자 개개인의 상황에 맞춰 되도록 정확한 정복과 고정이 가능한 안면구조물에서 부터 시작하여 교합을 형성하고, 안면골의 유기적인 관계에 유의하여 삼차원적인 구조를 재위치 시킬 수 있도록 해야 한다. 연조직 봉합 시에는 얼굴 피부의 처짐 등을 방지하기 위해 골막, 근막 및 중요 안면 인대들을 고려하여 시행하여야 한다.

• 대한공간정보학회지
• /
• 제22권1호
• /
• pp.13-22
• /
• 2014

최근 지적공부와 실제 토지이용 현황과의 불일치로 토지관리 업무에 많은 민원이 발생하고 있다. 이러한 문제를 개선하기 위해서는 토지관련 정보를 이용하여 토지이동 대상필지를 정확하게 선정하고 시나리오별로 보상비를 평가하는 것이 중요하다. 본 연구에서는 연속지적도와 실폭도로를 기반으로 GIS 공간중첩을 수행하였으며, 도로편입률에 따른 퍼지함수를 적용하여 지목과 소유구분별 토지이동 필지수와 면적을 분석하였다. 또한 토지이동 대상필지의 개별공시지가 정보를 이용하여 시나리오별 보상비를 계산하였으며, 이를 지목과 소유구분에 따라 읍면별로 정리하였다. 본 연구에서는 읍면별 토지이동 대상필지에 대한 보상비를 시나리오별로 제공함으로서 지자체 재정여건에 부합하는 토지이동 대상필지 업무를 효과적으로 지원할 수 있었다.

• 대한소아치과학회지
• /
• 제25권1호
• /
• pp.134-143
• /
• 1998

Twin Blocks are simple bite-blocks that effectively modify the occlusal inclined plane to induce favorably directed occlusal forces by causing a functional mandibular displacement. These devices use upper and lower bite-blocks that engage on occlusal inclined planes. Twin Blocks use the forces of occlusion as the functional mechanism to correct the malocclusion. To get an excellent result in the treatment by using the Twin Block appliances, proper case selection must be needed. Twin Block treatment is performed in two stages. Twin Blocks are used in the active phase to correct the anteroposterior relationship and establish the correct vertical dimension. Once this phase is accomplished, the Twin Blocks are replaced with an upper Hawley type of appliance with an anterior inclined plane, which is then used to support the corrected position as the posterior teeth settle fully into occlusion. The Twin Block is the most comfortable, the most esthetic ane the most efficient of all the functional appliances. Twin Blocks have many advantages compared to other functional appliances. Patients can wear Twin Blocks 24 hours per day and can eat comfortably with the appliances in place. From the moment Twin Blocks are fitted, the appearance is noticeably improved. There is less interference with normal function. Integration with conventional fixed appliances is simpler than with any other functional appliance. Twin Blocks allow independent control of upper and lower arch width. Appliance design is easily modified for transverse and sigittal arch development. The authors treated Class II malocclusion with Twin Blocks. and the results as follows; 1. Rapid profile improvement was achieved in 2-3 months. 2. There was excellent patient cooperation. 3. Severe overjet and overbite were reduced. 4. Class II molar relationship was changed to Class I.

• 한국산학기술학회논문지
• /
• 제16권11호
• /
• pp.7285-7292
• /
• 2015

본 연구의 목적은 생체역학적 변인을 근거로 하여 후진보법의 전방향 보행(댄스보행)이 후방보행처럼 재활과 걷기운동으로써의 가능성을 규명하는 것이다. 실험대상자는 13명의 여성댄스 전문가로 자료수집을 위하여 12대의 적외선카메라와 2대의 지면반력기가 동조되어 사용되었다. 연구결과에 따르면 댄스보행의 보속, 활보장과 양 하지지지기시간은 후방보행보다 크고, 활보폭은 작았으며 관절각범위, 관절모멘트와 관절파워의 최대치 출현 빈도에서 댄스보행이 후방보행보다 더 많았다. 이러한 결과들은 댄스보행이 재활과 걷기운동에 후방보행에 버금가는 훌륭한 도구임을 판단하는데 충분하다.

• 한국실내디자인학회논문집
• /
• 제18권6호
• /
• pp.202-210
• /
• 2009

This research was undertaken to prove the relationship between street mall activation and architectural plan design. The research methodology was established based on the analysis of data of two existing street malls in Korea (Western Dome & LaFesta) and theoretical studies of outdoor space design. The findings from this study are the following: First, building blocks with segments in every 50m or so are ideal for detailed communication between visitors and building contents. Second, the ratio of width of main corridor and building height should be less than 1 to provide intimate feel and keep visitors' attention concentrated in the facility. Third, store unit should have more storefronts to be exposed more to passers-by and lead more pedestrian traffic. Fourth, shape of store unit would rather be wide and shallow, instead of narrow and deep, to have more exposure to the central corridor. Fifth, the building block of the busiest(most expensive) area that is usually at the main entrance area of street mall should be flexible to fit more smaller units to maximize the profitability. Sixth, the main entrance of store should face the main pedestrian corridor to induce the influx of visitors. Lastly seventh, anchor tenant that has strong name recognition is usually located on basement or higher level to induce pedestrian traffic into the mall, key tenants that are strong and familiar brand names should be located at the corner of building block with spacing to attract visitors, provide even distribution of traffic, and support wayfinding, and local tenant should be located at small units along the central corridor or remainder spaces occurred from building core layout.

• 한국실내디자인학회논문집
• /
• 제26권1호
• /
• pp.114-123
• /
• 2017

The objective of this paper is to investigate problems associated with the storehouse affiliated with rural housing for the elderly engaged in farming activities, and to suggest improvements with the examples of storehouse floor plans. The elderly in rural area still engage in farming even though they are suffering from aging problems. Therefore, the planning of storehouse which has relevance to agriculture is very important. The methods employed were a field survey and interviews with residents. 12 houses belonging to elderly people (60's and over) were selected by the convenient sampling in Cheonan, Chungcheongnam-do. The results are as follows. First, at least more than 3 storehouses have to be planned to store the goods separatedly according to their kinds and characteristics. Second, storehouses should be placed near or directly connected with the main house to support the accessibility of the elderly. Third, the open space has to be planned in front of the storehouse to park a truck for loading goods directly. Fourth, the storage equipments such as shelves should be planned inside of the storehouse for the space efficiency and user convenience. Fifth, the width of the door should be wide enough to carry agricultural products and goods. It is recommended to use double hinged doors or double pocket doors. Besides, the thresholds of the doors should be removed and, rather than using direct lighting system, it is better to use indirect lightings and task lightings together to minimize glare and to provide enough illumination.

• 한국산학기술학회논문지
• /
• 제16권9호
• /
• pp.5789-5794
• /
• 2015

최근 스마트 폰, 모바일 PC 제품의 외관에 필요한 가벼운 금속제품으로 제조를 하기 위하여 알루미늄 압출 공정과 CNC 가공기법을 적용한 생산방식이 널리 사용되고 있다. 하지만, 알루미늄 압출법은 외관 디자인의 제약이 있으며, 특히 CNC 가공 프로세스가 상대적으로 높은 생산 비용 및 낮은 생산성으로 생산단가가 많이 높은 단점이 있다. 본 연구에서, 새로운 처리 방법을 순서 재료비를 대폭 감소시키고, 제조 속도를 향상시키기 위해 판재성형과 부피성형의 두가지 공정을 섞어 새로운 판단조 공정을 개발하였다. 새로운 판단조 공법(hybrid plate forging)이란 우선 일반적인 딥드로잉으로 중간 모양을 만든 후 원하는 벽 부위만 증육을 하는 방법을 의미한다. 이러한 판단조 공법을 활용하여 재료의 낭비와 제조 시간을 최소화하는 것이 가능하게 된다. 본 연구에서는 상용 유한 요소 프로그램 AFDEX-2D를 통해 판단조공정을 설계하였고 최적의 사용 가능한 소재의 두께와 초기 폭을 설계하였다. 최종적으로 실제 노트북 케이스 금형을 제작하여 제안한 방법의 타당성을 검증하였다.