Browse > Article
http://dx.doi.org/10.7467/KSAE.2016.24.4.463

The Characteristics Analysis of Track of Laser Metal Deposition Using AISI M2 Powder  

Kim, WonHyuck (Institute of Technology, NKS Co. Ltd.)
Song, MyungHwan (Institute of Technology, Myoungjin Tech Co. Ltd.)
Park, InDuck (Busan Laser Application Support Center, KIMM)
Kang, DaeMin (Department of Mechanical Engineering, Pukyong National University)
Publication Information
Transactions of the Korean Society of Automotive Engineers / v.24, no.4, 2016 , pp. 463-470 More about this Journal
Abstract
In this paper, the characteristics analysis of LMD track, such as including track structure, track wear resistance and track thickness, were analyzed to enhance the deposition efficiency using a diode-pumped disk laser. SKD61 hot work steel plate and Fe based AISI M2 alloy were used as a the substrate and powder for the LMD process, respectively. The laser power, track pitch and powder feed rate among LMD parameters were adopted to estimate the deposition efficiency. As the laser power is increased, heat input and melting pool on the substrate is grown also increases, so resulting in the increased LMD track thickness was increased. Through EPMA mapping analysis of the cross-section in the LMD track, it was observed that all the elements are evenly distributed inside. Therefore, the entire hardness in the LMD track is expected to be almost uniform regardless of location. The characteristics of the LMD specimen were excellent compared to the STD11 specimen in terms of the wear track width and the wear rate as well as the coefficient of friction. Especially the wear rate of LMD specimen has been significantly reduced by 60 % or more. From Based on the experimental results, the prediction formula of LMD thickness was calculated by using laser power, track pitch and powder feed rate.
Keywords
Hardness; Laser metal deposition; M2 powder; Tool steel; Track; Wear resistance;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 Y. S. Chang, "Evaluation of the Productivity and Environmental Effects of Laser Aided Direct Metal Deposition Process for Remanufacturing," Clean Technol., Vol.13, No.3, pp.228-234, 2007.
2 J. J. Kim and Y. S. Kim, "Wear Characterization Evaluation on Surface Treatment of Die for Improving the Productivity of Advanced High Strength Steel (AHSS)," KSAE Annual Conference Proceedings, pp.1082-1083, 2015.
3 J. U. Lee, C. M. Kim, F. Barlat and M. G. Lee, "Frictional Behaviors of Automobile Steel Sheets," KSAE Spring Conference Proceedings, pp.1287-1289, 2012.
4 E. Billur, "Die Materials and Wear in Stamping AHSS," J. Stamping, pp.8-13, 2010.
5 S. Q. Wang, K. M. Chen, X. H. Cui, Q. C. Jiang and B. Hong, "Effect of Alloying Elements on Thermal Wear of Cast Hot-Forging Die Steels," J. Iron. Steel Res. Int., Vol.13, No.5, pp.53-59, 2006.   DOI
6 W. Zhang, "Research on Microstructure and Property of Fe-VC Composite Material Made by Laser Cladding," Physics Procedia, Int. Conf. Solid State Devices Mater. Sci., Vol.25, pp.200-204, 2012.
7 C. Mitterer, F. Holler, F. Ustel and D. Heim, "Application of Hard Coatings in Aluminium Die Casting - Soldering, Erosion and Thermal Fatigue Behaviour," Surf. Coat. Technol., Vol.125, No.1-3, pp.233-239, 2000.   DOI
8 O. Salas, K. Kearns, S. Carrera and J. J. Moore, "Tribological Behavior of Candidate Coatings for Al Die Casting Dies," Surf. Coat. Technol., Vol.172, No.2-3, pp.117-127, 2003.   DOI
9 H. Forati Rad, A. Amadeh and H. Moradi, "Wear Assessment of Plasma Nitrided AISI H11 Steel," Mater. Des., Vol.32, No.5, pp.2635-2643, 2011.   DOI
10 H. Gedda, "Laser Surface Cladding - A Literature Survey," Tech. Rep., 2000.
11 N. H. Kang and Y. G. Yoo, "Laser Cladding Technology in Overlay Welding," J. Weld. Joining, Vol.25, No.1, pp.7-8, 2007.   DOI
12 G. Telasang, J. Dutta Majumdar, G. Padmanabham and I. Manna, "Structure-property Correlation in Laser Surface Treated AISI H13 Tool Steel for Improved Mechanical Properties," Mater. Sci. Eng., A, Vol.599, pp.255-267, 2014.   DOI
13 Z. Zhang, P. Lin, D. Cong, S. Kong, H. Zhou and L. Ren, "The Characteristics of Treated Zone Processed by Pulsed Nd-YAG Laser Surface Remelting on Hot Work Steel," Opt. Laser Technol., Vol.64, pp.227-234, 2014.   DOI
14 C. Navas, A. Conde, B. J. Fernandez, F. Zubiri and J. de Damborenea, "Laser Coatings to Improve Wear Resistance of Mould Steel," Surf. Coat. Technol., Vol.194, No.1, pp.136-142, 2005.   DOI
15 Q. Shen and Y. Shen, "Development of Laser Cladding Stellite F Alloy On Valve Face," FISITA World Automotive Congress Proceedings, F2000A110, 2000.