• 한국세라믹학회지
• /
• 제46권5호
• /
• pp.534-539
• /
• 2009

Reaction Bonded Silicon Carbide(RBSC) has been used for engineering ceramics due to low-temperature fabrication and near-net shape products with excellent structural properties such as thermal shock resistance, corrosion resistance and mechanical strength. Recently, attempts have been made to develop hot gas filter with gradient pore structure by RBSC to overcome weakness of commercial clay-bonded SiC filter such as low fracture toughness and low reliability. In this study a fabrication process of porous RBSC with multi-layer pore structure with gradient pore size was developed. The support layer of the RBSC with multi-layer pore structure was fabricated by conventional Si infiltration process. The intermediate and filter layers consisted of phenolic resin and fine SiC powder were prepared by dip-coating of the support RBSC in slurry of SiC and phenol resin. The temperature of $1550^{\circ}C$ to make Si left in RBSC support layer infiltrate into dip-coated layer to produce SiC by reacting with pyro-carbon from phenol resin.

• 기본간호학회지
• /
• 제7권1호
• /
• pp.42-59
• /
• 2000

This study was done to analyze and develop the concept of coping in patients receiving hemodialysis. The Hybrid Model of concept development was applied to develop a conceptual structure of coping in patients receiving hemodialysis, which included a field study carried out using an in-dept interview with 18 patients in the hemodialysis room of one general hospital in Seoul. Data-analysis was done in three phases as suggested by the Hybrid Model. Finally, by summarizing the results from each case, the attributes of coping, its dimensions, definition and structure were outlined. According to the results of the study, a conceptual structure of coping which centers around stressors, stress-appraisal, strategy of coping and new definitions of coping in patients receiving hemodialysis was suggested : The coping of patients receiving hemodialysis is a process that deals with physical, emotional, inter-personal, and role stress caused by hemodialysis due to renal failure. It has a series of phases which include a phase that appraises the stressful situation based on past experience of chronic disease management, one's remaining rears, the extent of family support, the extent of economic dependency, inter-personal support. education and uncertainty, and a phase of developing coping strategies that con be affected by social support and self esteem. As a result of coping, patients adapt or not to the life situation of receiving hemodialysis.

• 한국농공학회지
• /
• 제36권3호
• /
• pp.84-89
• /
• 1994

Section forces of greenhouse structures were studied to suggest basic information for the structural design of greenhouses with respect to roof types and support conditions. Structural analyses were performed for pitched and arched roof, and fixed and hinged support under snow loads and wind loads. Followings are the results obtained and are expected to be useful in determining the span length and roof type in greenhouse design. 1. Special considerations might he required for roof design at the heavy snow region, and for the support design at the strong wind region, respectively. 2. Single-span structure was found to be stronger than multi-span structure under the snow load, but the former was found to be weaker than the latter under the wind load. 3. Arched roof structure was expected to be safer than pitched roof structure if the dimensions and loads were equal. 4. Greenhouse orientation and roof slope should be considered in optimum structural design of grrenhouses, because these two factors are closely related with the influence of wind load and snow load.

• Structural Engineering and Mechanics
• /
• 제61권4호
• /
• pp.527-538
• /
• 2017

The evaluation of the loss-of-support conditions of frictional beam-to-column connections using simplified numerical models describing the transverse response of a portal-like structure is presented in this paper considering the effects of the seismic-hazard disaggregation. Real earthquake time histories selected from European Strong-motion Database (ESD) are used to show the effects of the seismic-hazard disaggregation on the beam loss-of-support conditions. Seismic events are classified according to different values of magnitudes, epicentral distances and soil conditions (stiff or soft soil) highlighting the importance of considering the characteristics of the seismic input in the assessment of the loss-of-support conditions of frictional beam-to-column connections. A rigid and an elastic model of a frame of a precast industrial building (2-DoF portal-like model) are presented and adopted to find the minimum required friction coefficient to avoid sliding. Then, the mean value of the minimum required friction coefficient with an epicentral distance bin of 10 km is calculated and fitted with a linear function depending on the logarithm of the epicentral distance. A complete parametric analysis varying the horizontal and vertical period of vibration of the structure is performed. Results show that the loss-of-support condition is strongly influenced by magnitude, epicentral distance and soil conditions determining the frequency content of the earthquake time histories and the correlation between the maxima of the horizontal and vertical components. Moreover, as expected, dynamic characteristics of the structure have also a strong influence. Finally, the effect of the column nonlinear behavior (i.e. formation of plastic hinges at the base) is analyzed showing that the connection and the column are a series system where the maximum force is limited by the element having the minimum strength. Two different longitudinal reinforcement ratios are analyzed demonstrating that the column strength variation changes the system response.

• 지역사회간호학회지
• /
• 제14권4호
• /
• pp.657-666
• /
• 2003

Purpose; This study was conducted to investigate the relationship between self-efficacy, family support and health promotion behavior of the elderly in a community. Method: The sample consisted of 208 elderly and data was collected from November 18 to December 21, 2002. The instrument of this study was a structured questionnaire including health promoting behaviors, self-efficacy, family support, general characteristics. Analysis of the data was done by use of descriptive statistics, t or F, Pearson Correlation Coefficient, Stepwise multiple regression. Results: 1. The general characteristics related to health promoting behavior were gender, family structure, education level and monthly pocket money. 2. The general characteristics related to self efficacy were gender, age, family structure, education level, religion and monthly pocket money. 3. The general characteristics did not affect family support. 4. Health promoting behavior score was the highest in the interpersonal support (2.72) and in order was nutrition(2.65), stress management(2.31), self actualization(2.30), exercise(2.05), health responsibility(1.86). 5. There was a significantly high correlation between health promoting behavior and self efficacy(r= .605, p= .000), and family support(r= .500, p= .000) and between self-efficacy and family support were correlated relatively high(r= .498, p= .000) 6. Stepwise multiple regression analysis revealed that the most powerful predictor of health promotion behavior in elderly was self-efficacy (39.6%). A combination of self-efficacy, family support, monthly pocket money, education level and present illness status explained 48.5% of the variance for health promoting behavior. In conclusion, the results of this study showed that self-efficacy and family support are very important variables in explaining the health promoting behaviors in elderly. Therefore, these variables should be considered in nursing intervention development and education, especially, self-efficacy improving programs that considered exercise and health responsibility are expected to effect the health promoting behavior in elderly.

• 한국지반공학회논문집
• /
• 제28권12호
• /
• pp.99-110
• /
• 2012

지반굴착을 위해서 적용되는 흙막이공법은 앵커, 네일, 버팀보 등과 같은 지보재를 사용하게 되며, 지보재 설치에 시간적, 경제적 문제와 건설되는 구조물에도 결함을 야기하는 등의 문제를 안고 있다. 본 연구에서 제안된 지주식 흙막이 공법은 전면지주와 배면지주를 경사로 설치하여 일체화시킨 가시설 공법으로, 배면지주의 설치로 인해 전면지주에 작용하는 토압을 효과적으로 분산시켜 가시설의 구조적인 안정성을 증대시켰다. 본 연구에서는 실내모형실험을 통해 전면지주와 배면지주의 설치각도, 재료강성 등을 달리하여 지주식 흙막이 공법의 안정성을 확인하였으며, 실내 모형실험 결과를 이용하여 배면지주 설치로 인한 전면지주에 작용되는 토압감소효과를 분석하였다. 실험결과 배면지주의 설치로 인해 전면지주에 작용되는 토압감소 및 변위억제 효과는 상당히 큰 것으로 평가되었으며, 본 실험을 통해 지주식 흙막이 공법의 안정성이 증명되었다. 또한 랜킨토압이론을 이용하여 토압감소율을 정량적으로 분석하였다.

• 한국CDE학회논문집
• /
• 제10권1호
• /
• pp.61-69
• /
• 2005

In the global ship structure and vibration analysis, the FE(finite element) analysis model is required in the early design stage before the 3D CAD model is defined. And the analysis model generation process is a time-consuming job and takes much more time than the engineering work itself. In particular, ship structure has too many associated structural members such as stringers, stiffness and girders etc. These structural members should be satisfied as the constraints in analysis modeling. Therefore it is necessary to support generation of analysis model with satisfying these constraints as an automatic manner. For the effective support of the global ship analysis modeling, a method to generate analysis model using initial design information within ship design process, that hull form offset data and compartment data, is developed. In order to easily handle initial design information and FE model information, flexible data structure is proposed. An automatic quadrilateral mesh generation algorithm using initial design information to satisfy the constraints imposed on the ship structure is also proposed. The proposed data structure and mesh generation algorithm are applied for the various type of vessels for the usability test. Through this test, we have verified the stability and usefulness of this system including mesh generation algorithm.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1032-1035
• /
• 2003

The field of handwriting recognition has been researched for many years. A hybrid classifier has been proven to be able to increase the recognition rate compared with a single classifier. In this paper, we combine support vector machine (SVM) and hidden Markov model (HMM) for offline handwritten numeral recognition. To improve the performance, we extract features adapted for each classifier and propose the modified SVM decision structure. The experimental results show that the proposed method can achieve improved recognition rate for handwritten numeral recognition.

• 사회복지연구
• /
• 제41권2호
• /
• pp.279-308
• /
• 2010

본 연구는 '자녀유무별 여성임금격차(Family gap)' 의 국가별 차이를 가져오는 제도적 요인을 탐색하기 위해 OECD 14개국을 대상으로 가족정책, 노동시장 및 사회구조와 Family gap의 관계를 분석하는 것을 목적으로 한다. 이 때 가족정책을 여성의 노동역할을 지원하는 '고용지원 가족정책' 과 양육역할을 지원하는 '양육지원 가족정책' 으로 분류하여 각각이 가지는 정책적 지향에 따라 Family gap에 미치는 영향을 구분하였으며 노동시장 및 사회구조를 분석하기 위한 변수로 노동시장 성분절 구조, 임금불평등 구조, 여성의 사회적 지위와 경제적 상황을 모형에 포함하였다. 분석을 위하여 먼저 헤크만 2단계추정법(Heckman's two stage estimation)을 통해 국가별 Family gap 크기를 측정한 후 퍼지셋분석(FSQCA)을 통해 어떠한 제도적 조합이 낮은 Family gap을 가져오는지 검증하였다. 분석결과 낮은 Family gap은 '고용지원 가족정책' 의 발달과 '낮은 임금불평등 구조' 의 결합인과관계(conjunctual causation)에 의해 발생하는 것으로 나타났다. 분석결과를 통해 '자녀가 있는 여성' 의 양육으로 인한 불리함을 줄이고 상대적인 임금수준을 높이기 위한 제도적 노력으로 여성의 고용지속 및 양육의 사회화를 지원하고 여성과 남성 모두의 일-가족 양립을 지향하는 가족정책의 확충과 함께 낮은 노동지위에 있는 여성의 임금 및 고용조건의 보호가 우선과제가 된다는 정책적 함의를 제시하였다.

• 한국학교보건학회지
• /
• 제17권2호
• /
• pp.127-150
• /
• 2004

Objectives: The purpose of this study is to provide a basic structure for the establishment of the direction of school health programs, an overview of the historical changes of school health programs and their results, and a conceptual framework on school health programs. Methods: The data analysis has been done using a statistical almanac, relevant laws and regulations, operation handbook of the program, theses, reports, records of public hearings, and other reports as a technical research primarily based on evidence. The methodology of this research classifies the development and growth transition of school health programs during a historical period through the investigation of regulations, organization, manpower, and its program via its development process and to provide a basic tool to design a solid school health policy. Results: A The growth and development of school health programs The development of school health programs was classified into three different periods including the forthcoming period (1945~1967), the completion period (1967~1993), and the actualization period based on the establishment of legislation for School Health Law, other relevant legislation, and the contents of school health programs (1993~present). B. Policy direction of school health programs School health programs have reestablished their goals and range based on basic direction, and developed the W1it model of information structure for school health program management and its basic structure. Finally, the stepwise support system through the building of the school health support center is recommended. (1) The basic direction of school health programs has proposed 7 basic goals to reestablish the policy direction of health improvement based on total health. (2) The W1it model of information system and the school health information system for school health program management has been developed to utilize positive management. (3) School health policy through the study of the health laws and systems has been developed. The necessity of school health support center for the policy support, functional support and operation support has also been proposed. Conclusions: It is necessary to build a school health support center that consists of health professionals in charge of policy support, functional support, and program support of school health programs in order to realize and develop new policy.