• Proceedings of the IEEK Conference
• /
• 2004.08c
• /
• pp.581-584
• /
• 2004

Currently, there are many subscriber access networks: PSTN, ADSL, Cellular Network, IMT200 and so on. To these service providers that provide above network service, it is important that they authenticate and authorize legal subscribers and account for their usage. At present, There exist the several protocols that Support AAA(Authentication, Authorization and Accounting) service : RADIUS, Diameter, TACACS+. Nowadays, RADIUS has used for AAA service widely. It has been extended to support other access network environment. So, we extend RADIUS to support environment of Mobile IPv6. Mobile IPv6 uses IPsec as a security mechanism, basically. But, IPsec is a heavy security technology for small, portable, mobile device. Especially, it is serious at IKE, the subset of IPsec. IKE is a key distribution protocol that distributes the key to the endpoints of IPsec. In t:lis paper, we extend RADIUS to support environment of Mobile IPv6 and simplify the IKE phase of IPsec by AAA system distributing the keys by using its security communication channel. Namely, we propose the key distribution method for IPsec SA establishment between mobile node and home agent. The suggested method was anticipated to be effective at low-power, low computing deyice. Finally, end users feel the faster authentication.

• Journal of KIISE:Computing Practices and Letters
• /
• v.9 no.5
• /
• pp.567-577
• /
• 2003

We usually applied PPP CHAP (Point-to-Point Protocol Challenge Handshake Authentication Protocol) when the visited ISP subscriber accesses to authentication server in own home ISP network and IP Assignment for remote Internet service. But PPP CHAP doesn't support in case of visited ISP subscriber in GPRS network accesses to authentication server in own home ISP network for wireless Internet service. We suggest solution this problem with PPP CHAP improvement. For this we propose the modified PPP CHAP message format, PCO Message format at MT, and interworking message and format between GGSN and RADIUS in home ISP network for wireless internet service of mobile ISP subscriber at GPRS network in this paper. We also show authentication results when visited mobile ISP subscriber via PPP CHAP at GPRS network accesses the RADIUS server in home ISP network.

• East Asian mathematical journal
• /
• v.37 no.3
• /
• pp.295-305
• /
• 2021

In this paper, we analyze the efficiency of a domain decomposition method for the two-dimensional telegraph equations. We formulate the theoretical spectral radius of the iteration matrix generated by the domain decomposition method, because the rate of convergence of an iterative algorithm depends on the spectral radius of the iteration matrix. The theoretical spectral radius is confirmed by the experimental one using MATLAB. Speedup and operation ratio of the domain decomposition method are also compared as the two measurements of the efficiency of the method. Numerical results support the high efficiency of the domain decomposition method.

• Journal of Technologic Dentistry
• /
• v.45 no.3
• /
• pp.67-73
• /
• 2023

Purpose: This in vitro study aimed to evaluate the clinical acceptability of precision of fit of the support thickness of Co-Cr alloy copings fabricated using selective laser melting (SLM). Methods: Thirty dental stone models of maxillary left molar abutments were manufactured, images were taken using a scanner, and a computer-aided design program was used to design the form of a conventional metal ceramic crown coping. Overall, 30 single copings were made from Co-Cr alloy using SLM and divided into three support radius groups (0.1, 0.25, and 0.35 mm) of 10 for each. Digitized data were superimposed with three-dimensional inspection software to quantitatively obtain the machinability of a ceramic crown coping, and visual differences were confirmed using a color map. The root mean square values of the ceramic crown coping group were statistically analyzed using one-way analysis of variance (α=0.05). Results: The precision of fit was superior with 0.25 mm compared with 0.1 mm and 0.35 mm, and the results exhibited significant differences (p<0.05). All specimens showed that various support thicknesses did not exceed the clinically permitted value of 120 ㎛, which mean that more than 0.1 mm and 0.35 mm of support radius for SLM was adequate. Conclusion: The support thickness of Co-Cr alloy restoration fabricated using SLM is shown to affect the adaptation.

• Convergence Security Journal
• /
• v.4 no.2
• /
• pp.53-60
• /
• 2004

We describe CHAP authentication for roaming service method of visited ISP subscriber on GPRS network. We also illustrate how visited mobile ISP subscriber can access ISP server and authenticate RADIUS in home network via Gateway GPRS Support Node (GGSN) on GPRS/UMTS network for wireless internet service and roaming. For this we propose the modified CHAP message format, PCO Message format at MT, and interworking message and format between GGSN and RADIUS in home ISP network for wireless internet service of mobile ISP subscriber at GPRS network in this paper. We also show authentication results when visited mobile ISP subscriber via CHAP at GPRS network accesses the RADIUS server in home ISP network.

• Geomechanics and Engineering
• /
• v.16 no.1
• /
• pp.59-69
• /
• 2018

This study focused on the mechanical and hydraulic characteristics of underwater tunnels based on Mohr-Coulomb (M-C), Hoek-Brown (H-B) and generalized H-B failure criteria. An improved approach for calculating stress, displacement and plastic radius of the circular tunnel considering hydraulic-mechanical coupling was developed. The innovation of this study was that the radius-incremental-approach was reconstructed (i.e., the whole plastic zone is divided into a finite number of concentric annuli by radius), stress and displacement of each annulus were determined in terms of numerical method and Terzaghi's effective stress principle. The validation of the proposed approach was conducted by comparing with the results in Brown and Bray (1982) and Park and Kim (2006). In addition, the Rp-pin curve (plastic radius-internal supporting pressure curve) was obtained using the numerical iterative method, and the plastic radius of the deep-buried tunnel could be obtained by interpolation method in terms of the known value of internal supporting pressure pin. Combining with the theories in Carranza and Fairhurst (2000), the improved technique for assessing the reliability of the tunnel support was proposed.

• Proceedings of the KWS Conference
• /
• v.43
• /
• pp.275-277
• /
• 2004

Fictitious notch radius approach is based on the Neuter's microstructural support hypothesis which assumes that fatigue crack is governed by highly stressed volume of the material right on the weld toe area rather than the surface stress at a pin point of weld toe area. Variety of successes have been achieved in applying this methodology to the fatigue of welded joint, hence, it became one of recommended design procedure in IIW's recommendation as well as many ship classification societies. 1mm fictitious notch radius approach was applied to the various fatigue problems of welded joints in this study covering the effect of weld size, notch stress calculation for 3D geometry and low cycle fatigue problem. It was found that fictitious notch radius approach fumed out to be very effective and accurate in dealing with fatigue strength of welded joint.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.7 no.5
• /
• pp.72-84
• /
• 1998

In order ot study the influence of a circular inclusion on a stress field near a crack tip, mutual interference of a slant crack and the circular inclusion is analyzed of a bimaterial inclusion. As the crack emanates at the equivalent slant crack angle the correction factors FⅠ and FⅡ for the inclusion wit small Young's modulus were found to decrease as the inclusion radius increased. The correction factors for inclusion with large Young's modulus increase as the inclusion radius increases at the equivalent radius of the inclusion, the correction factors decrease as the slant crack angle increases for the aspect ratio $\frac{c}{W}$ = 0.1 irrespective of the Young's modulus. For $\frac{c}{W}$ greater than 0.2, they increase as the slant crack angle increases. There is no influence of stress mutual interfce after crack emanates beyond the inclusion radius.

• The KIPS Transactions:PartC
• /
• v.9C no.4
• /
• pp.551-562
• /
• 2002

We usually applied PPP CHAP when the visited ISP subscriber accesses to authentication server in own home ISP network and IP Assignment for remote Internet service. But PPP CHAP doesn't support in case of visited ISP subscriber in GPRS network accesses to authentication sorrel in own home ISP network for wireless Internet service. We suggest solution for this problem with PPP CHAP improvement. For this we propose the modified PPP CHAP message format, PCO Message format at MT, and interworking message and format between GGSN and RADIUS in home ISP network for wireless internet service of mobile ISP subscriber at GPRS network in this paper. We also show authentication results when visited mobile ISP subscriber via PPP CHAP at GPRS network accesses the RADIUS server in home ISP network.

• Computers and Concrete
• /
• v.25 no.5
• /
• pp.411-425
• /
• 2020

In this paper, the shell material has been taken as functionally graded material and their material quantity is located by the exponential volume fraction law. Moreover, the impact of ring supports around the shell circumference has been examined for their various positions along the shell axial length. These rings support restraints the radial displacement in the transverse direction. While the axial modal deformation functions have been estimated by characteristic beam functions and nature of materials used for construction of cylindrical shells. The fundamental natural frequency of cylindrical shell of parameter versus ratios of length- and height-to-radius for a wide range has been reported and investigated through the study. In addition, by increasing height-to-radius ratio resulting frequencies also increase and frequencies decrease on ratio of length-to-radius. Though the trends of frequency values of both ratios are converse to each other with three different boundary conditions. Also it is examined the position of ring supports with length-to radius ratio, height-to-radius ratio and varying the exponent of volume fraction. MATLAB software package has been utilized for extracting shell frequency spectra. The obtained results are confirmed by comparing with available literature.