• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 학술대회지
• /
• pp.581-584
• /
• 2004

Currently, there are many subscriber access networks: PSTN, ADSL, Cellular Network, IMT200 and so on. To these service providers that provide above network service, it is important that they authenticate and authorize legal subscribers and account for their usage. At present, There exist the several protocols that Support AAA(Authentication, Authorization and Accounting) service : RADIUS, Diameter, TACACS+. Nowadays, RADIUS has used for AAA service widely. It has been extended to support other access network environment. So, we extend RADIUS to support environment of Mobile IPv6. Mobile IPv6 uses IPsec as a security mechanism, basically. But, IPsec is a heavy security technology for small, portable, mobile device. Especially, it is serious at IKE, the subset of IPsec. IKE is a key distribution protocol that distributes the key to the endpoints of IPsec. In t:lis paper, we extend RADIUS to support environment of Mobile IPv6 and simplify the IKE phase of IPsec by AAA system distributing the keys by using its security communication channel. Namely, we propose the key distribution method for IPsec SA establishment between mobile node and home agent. The suggested method was anticipated to be effective at low-power, low computing deyice. Finally, end users feel the faster authentication.

• 한국정보과학회논문지:컴퓨팅의 실제 및 레터
• /
• 제9권5호
• /
• pp.567-577
• /
• 2003

GPRS 망으로 이동한 이동 ISP 가입자는 자신의 홈 ISP 망을 접속하여 무선 인터넷 서비스를 받기 위해 홈 ISP 망으로부터 인증을 받고 IP를 할당받아야 한다. 이에 본 논문에서는 GPRS 망으로 이동한 이동 ISP 가입자의 인증 처리를 위해 PPP CHAP과 RADIUS 인증 서버의 연계 방안을 제시한다. 이를 위해 우선 이동 ISP 망 가입자의 단말에서 정의되어야 할 인증 메시지 구조와 GPRS 망 게이트웨이에서 구현될 메시지 구조를 제시한다. 아울러 GGSN과 ISP 망간의 인증 메시지 구조 정의를 기반으로 제안된 내용에 대해 시험 환경 구축을 통해 실제 시뮬레이션 결과를 보였다.

• East Asian mathematical journal
• /
• 제37권3호
• /
• pp.295-305
• /
• 2021

In this paper, we analyze the efficiency of a domain decomposition method for the two-dimensional telegraph equations. We formulate the theoretical spectral radius of the iteration matrix generated by the domain decomposition method, because the rate of convergence of an iterative algorithm depends on the spectral radius of the iteration matrix. The theoretical spectral radius is confirmed by the experimental one using MATLAB. Speedup and operation ratio of the domain decomposition method are also compared as the two measurements of the efficiency of the method. Numerical results support the high efficiency of the domain decomposition method.

• 대한치과기공학회지
• /
• 제45권3호
• /
• pp.67-73
• /
• 2023

Purpose: This in vitro study aimed to evaluate the clinical acceptability of precision of fit of the support thickness of Co-Cr alloy copings fabricated using selective laser melting (SLM). Methods: Thirty dental stone models of maxillary left molar abutments were manufactured, images were taken using a scanner, and a computer-aided design program was used to design the form of a conventional metal ceramic crown coping. Overall, 30 single copings were made from Co-Cr alloy using SLM and divided into three support radius groups (0.1, 0.25, and 0.35 mm) of 10 for each. Digitized data were superimposed with three-dimensional inspection software to quantitatively obtain the machinability of a ceramic crown coping, and visual differences were confirmed using a color map. The root mean square values of the ceramic crown coping group were statistically analyzed using one-way analysis of variance (α=0.05). Results: The precision of fit was superior with 0.25 mm compared with 0.1 mm and 0.35 mm, and the results exhibited significant differences (p<0.05). All specimens showed that various support thicknesses did not exceed the clinically permitted value of 120 ㎛, which mean that more than 0.1 mm and 0.35 mm of support radius for SLM was adequate. Conclusion: The support thickness of Co-Cr alloy restoration fabricated using SLM is shown to affect the adaptation.

• 융합보안논문지
• /
• 제4권2호
• /
• pp.53-60
• /
• 2004

본 논문에서는 무선 인터넷 환경에서 CHAP 인증 기법을 이용한 로밍 서비스 지원 방법을 기술한다. 이를 위해 특별히 GPRS 망으로 이동한 이동 ISP 망 가입자가 자신의 홈 ISP 망을 접속하여 인증을 받기 위한 기법을 제시한다 또 이동 ISP 망 가입자의 단말에서 정의되어야 할 인증 메시지 구조와 GPRS 망 게이트웨이에서 구현될 메시지 구조를 제시한다. 아울러 GGSN과 ISP 망간의 인증 메시지 구조를 정의하며 이들 제안된 내용에 대해 시험 환경 구축을 통해 실제 시뮬레이션 결과를 보였다.

• Geomechanics and Engineering
• /
• 제16권1호
• /
• pp.59-69
• /
• 2018

This study focused on the mechanical and hydraulic characteristics of underwater tunnels based on Mohr-Coulomb (M-C), Hoek-Brown (H-B) and generalized H-B failure criteria. An improved approach for calculating stress, displacement and plastic radius of the circular tunnel considering hydraulic-mechanical coupling was developed. The innovation of this study was that the radius-incremental-approach was reconstructed (i.e., the whole plastic zone is divided into a finite number of concentric annuli by radius), stress and displacement of each annulus were determined in terms of numerical method and Terzaghi's effective stress principle. The validation of the proposed approach was conducted by comparing with the results in Brown and Bray (1982) and Park and Kim (2006). In addition, the Rp-pin curve (plastic radius-internal supporting pressure curve) was obtained using the numerical iterative method, and the plastic radius of the deep-buried tunnel could be obtained by interpolation method in terms of the known value of internal supporting pressure pin. Combining with the theories in Carranza and Fairhurst (2000), the improved technique for assessing the reliability of the tunnel support was proposed.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2004년도 추계학술발표대회 개요집
• /
• pp.275-277
• /
• 2004

Fictitious notch radius approach is based on the Neuter's microstructural support hypothesis which assumes that fatigue crack is governed by highly stressed volume of the material right on the weld toe area rather than the surface stress at a pin point of weld toe area. Variety of successes have been achieved in applying this methodology to the fatigue of welded joint, hence, it became one of recommended design procedure in IIW's recommendation as well as many ship classification societies. 1mm fictitious notch radius approach was applied to the various fatigue problems of welded joints in this study covering the effect of weld size, notch stress calculation for 3D geometry and low cycle fatigue problem. It was found that fictitious notch radius approach fumed out to be very effective and accurate in dealing with fatigue strength of welded joint.

• 한국생산제조학회지
• /
• 제7권5호
• /
• pp.72-84
• /
• 1998

In order ot study the influence of a circular inclusion on a stress field near a crack tip, mutual interference of a slant crack and the circular inclusion is analyzed of a bimaterial inclusion. As the crack emanates at the equivalent slant crack angle the correction factors FⅠ and FⅡ for the inclusion wit small Young's modulus were found to decrease as the inclusion radius increased. The correction factors for inclusion with large Young's modulus increase as the inclusion radius increases at the equivalent radius of the inclusion, the correction factors decrease as the slant crack angle increases for the aspect ratio $\frac{c}{W}$ = 0.1 irrespective of the Young's modulus. For $\frac{c}{W}$ greater than 0.2, they increase as the slant crack angle increases. There is no influence of stress mutual interfce after crack emanates beyond the inclusion radius.

• 정보처리학회논문지C
• /
• 제9C권4호
• /
• pp.551-562
• /
• 2002

원격 이동 가입자가 방문망에서 자신의 홈망 인증 서버를 접속하여 인증을 득하고 이를 통해 IP를 할당받아 무선 인터넷 서비스를 받게 되는데 이 경우 보편적으로 PPP CHAP 인증 기능을 적용한다. 그러나 기존의 PPP CHAP 인증 기능을 GPRS 망으로 이동한 원격 이동 ISP 가입자에게 직접 적용할 수는 없다. 이에 본 논문에서는 GPRS 망으로 이동한 원격 이동 ISP 가입자에게 PPP CHAP 인증 기능을 통해 홈망의 인증 서버를 접속하여 인증을 득하고 IP를 할당받아 이동 ISP 가입자가 GPRS 망에서 무선 인터넷 서비스를 받을 수 있는 방법을 제시한다. 이를 위해 본 논문에서는 GPRS 망으로 이동한 이동 ISP 가입자가 PPP CHAP 인증 기능을 통해 홈망의 인증서버로부터 인증을 득할 수 있도록 기존의 PPP CHAP 메시지 변경 구조와 MT에서의 PCO 메시지 구조, 그리고 GGSN과 ISP RADIUS 연동 메시지 구조 등을 제시한다. 또 제안된 PPP CHAP 방식을 통해 GPRS 망 GGSN에서 ISP망 내 RADIUS 서버 접속시 진행된 인증 시험 결과를 제시한다.

• Computers and Concrete
• /
• 제25권5호
• /
• pp.411-425
• /
• 2020

In this paper, the shell material has been taken as functionally graded material and their material quantity is located by the exponential volume fraction law. Moreover, the impact of ring supports around the shell circumference has been examined for their various positions along the shell axial length. These rings support restraints the radial displacement in the transverse direction. While the axial modal deformation functions have been estimated by characteristic beam functions and nature of materials used for construction of cylindrical shells. The fundamental natural frequency of cylindrical shell of parameter versus ratios of length- and height-to-radius for a wide range has been reported and investigated through the study. In addition, by increasing height-to-radius ratio resulting frequencies also increase and frequencies decrease on ratio of length-to-radius. Though the trends of frequency values of both ratios are converse to each other with three different boundary conditions. Also it is examined the position of ring supports with length-to radius ratio, height-to-radius ratio and varying the exponent of volume fraction. MATLAB software package has been utilized for extracting shell frequency spectra. The obtained results are confirmed by comparing with available literature.