• Speech Sciences
• /
• v.10 no.2
• /
• pp.207-221
• /
• 2003

Phonetic voicing does not support the phonological distinction of voiced/voiceless in English stops. The present study is aimed at defining the nature of voicing of English voiced stops. A review of the literature reveals that the voicing is position-conditioned and its length is notably inconsistent relative to the closure duration. No consistent relationships are found between vocal fold adduction and glottal pulsing in initial position. Stress reduced the voicing, etc. The hypothesis for experiments was: (1) active voicing: stress generates longer (stronger) voicing during the closure duration of a voiced stop; (2) passive voicing: stress induces shorter (weaker) voicing during the closure. Instead the voiced stop becomes more voiced when the preceding vowel (syllable) is stressed. The literature review and the results of two experiments comparing English and Slovakian suggested that the voicing of English voiced stops is passive (i.e., a coarticulation of glottal pulsing for adjacent vowels-syllables) and should be distinguished from active voicing in some other languages.

• Speech Sciences
• /
• v.6
• /
• pp.7-24
• /
• 1999

Eleven Korean learners of English took part in an experiment where the production and perception of English /r/ and /l/ in four different word positions was investigated. Overall the subjects made more errors on /l/ in both production and identification tests. The frequency of the subjects' errors was also sensitive to word positions in which the two English liquids occur. Especially the subjects made noticeably fewer errors in intervocalic medial position. It is suggested that the Korean subjects' acquisitional pattern in this particular case of foreign phone learning can be explained more by language particular 'interference' effects rather than 'universal' acoustic arguments such as those given in Dissosway et a1. (1982) and Sheldon and Strange (1982). The results of the experiment also support the minority position among second language educators that in some cases of non-native phone acquisition, learners' production abilities can be developed earlier than their perceptual abilities.

• Speech Sciences
• /
• v.7 no.1
• /
• pp.203-216
• /
• 2000

The purpose of this study is to revisit the property of the Korean plain stops in intervocalic position. More specifically, focusing on a word-internal, intervocalic position, this study investigates 1) how often speakers pronounce intervocalic. stops as fully voiced, 2) in what amount each speaker voice the plain stops during the stop closure, 3) whether the preceding or the following vowel influences the voicing of target consonants, and 4) the fundamental frequency pattern at the vowel onset after the target consonant shows any consistent pattern, regardless of whether voicing is present during the closure. The results of this study give strong support for the phonetic account of the voicing distinction in Korean. (Jun 1995, 1996).

• Asia pacific journal of information systems
• /
• v.13 no.2
• /
• pp.171-197
• /
• 2003

There have been quite many studies to identify factors affecting successful implementation of EDI systems. However, previous studies have investigated influencing factors independently. Given the complexity involved in the implementation of EDI systems, it might be quite necessary to investigate the interaction effects between influencing factors. The primary purpose of this study is to investigate the interaction effects of organizational characteristics as contextual variables on the relationship between managerial characteristics and EDI implementation. Analysis of 202 responses of survey questionnaire indicates the following: 1) Education/training and top management support has positive effect on the successful EDI implementation. 2) The degree of decentralization has strong, and management risk position has mild moderating effect on the relationship between managerial characteristics and EDI implementation. 3) The degree of formalization and organizational size have no moderating effect. 4) The subgroup analysis, conducted to determine the exact nature of interaction effect, reveals that the relationship between managerial characteristics and EDI implementation is significantly stronger with a high level of decentralization or management risk position than with a low level.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.10
• /
• pp.170-179
• /
• 2004

A vibration model of powder transfer equipment is developed by the lumped parameter method. A Powder transfer equipment does surging motion, bouncing motion and pitching motion. Motion equation becomes decoupling and removed vibration exciting source about pitching motion, and therefore designers presented the optimum design plan to be able to do adjustment with motion trajectory of powder transfer equipment. That is, way for design to be able to do motion trajectory of powder transfer equipment through change of design element as installation position and direction of motor, driving speed, mass unbalance, stiffness coefficient and installation position of support coil spring is presented. The design results, powder transfer equipment were able to know that fatigue destruction does not occur, and the reason is because maximum stress working on a basket structure is more very than fatigue strength small.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.1848-1853
• /
• 2000

Cause and the elimination method for the chattering phenomena were investigated the check valve attached exit of the auxiliary cooling water pump at a korean nuclear powerplant. From the site experiment and numerical calculation the incident angle of the disk was so small that it was not able to produce the lifting force to overcome the component of disk weight. Moreover, it turned out that the installed position was not symmetric for the secondary vortical flow generated inside the elbow, so that the flow structure had strongly unstable flow characteristics. From this technical support, the tapping noise and the chattering phenomena were eliminated exactly by changing the incidence angle of the valve disk and installed position of the check valve.

• International Journal of Precision Engineering and Manufacturing
• /
• v.7 no.2
• /
• pp.56-59
• /
• 2006

A vibrational model of powder transfer equipment based on the lumped parameter method was developed, in which the operating motion consists of surging, bouncing, and pitching. After decoupling the equation of motion, the vibrational excitation source of the pitching motion was removed. So the designers are able to plan the optimum design to adjust the motion trajectory of the powder transfer equipment. That is, a procedure to adjust the motion trajectory of powder transfer equipment by changing design specifications such as the installation position, the direction of the motor, the driving speed, the mass unbalance, the stiffness coefficient, and the installation position of the support spring, is presented in this paper. The powder transfer equipment manufactured according to the results of this study did not suffer fatigue destruction, since the maximum stress on the basket structure was sufficiently small.

• International Journal of Precision Engineering and Manufacturing
• /
• v.7 no.2
• /
• pp.60-65
• /
• 2006

A vibrational model of powder transfer equipment based on the lumped parameter method was developed, in which the operating motion consists of surging, bouncing, and pitching. After decoupling the equation of motion, the vibrational excitation source of the pitching motion was removed. So the designers are able to plan the optimum design to adjust the motion trajectory of the powder transfer equipment. That is, a procedure to adjust the motion trajectory of powder transfer equipment by changing design specifications such as the installation position, the direction of the motor, the driving speed, the mass unbalance, the stiffness coefficient, and the installation position of the support spring, is presented in this paper. The powder transfer equipment manufactured according to the results of this study did not suffer fatigue destruction, since the maximum stress on the basket structure was sufficiently small.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.1
• /
• pp.306-310
• /
• 2012

Location tracking system represents position by searching objects and humans. In this paper I would like to write about RF chip support Zigbee which is called CC2420. In simulated network circumstance, we can get the information about mobile-node by sending it to sink-node. Position finding is in error by 3m at outdoor environment. The error scale is acceptable within easy range of naked eyes. It can be overcome by using GPS information and Google maps with the wireless networking background.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.70
• /
• pp.21-38
• /
• 2016

The trend of payment terms of an international trade has been changed from letter of credit to open account. In this regard factoring has come out to support SMEs in terms of financing on a without recourse basis. However, factoring is in Korea is not workable softly due mainly to legal system affecting smooth assignment of receivables. Therefore this study suggest the following solutions : Korean Civil Law shall be modified to protect factor's position as a right creditor to debtor and protect factor's position when perfection among several creditors are incurred. However, formal modification to this end would not be easy in short run and it is suggested that a special law be established in case a commercial receivable assignment both domestic and internationally happens between seller and factor.