Program Development for Vibration Performance Evaluation of Powder Transfer Equipment

분립체 이송장치의 진동 성능평가를 위한 프로그램 개발

  • 이형우 (부산대학교 기계기술연구소) ;
  • 박노길 (부산대학교 기계공학부)
  • Published : 2004.10.01

Abstract

A vibration model of powder transfer equipment is developed by the lumped parameter method. A Powder transfer equipment does surging motion, bouncing motion and pitching motion. Motion equation becomes decoupling and removed vibration exciting source about pitching motion, and therefore designers presented the optimum design plan to be able to do adjustment with motion trajectory of powder transfer equipment. That is, way for design to be able to do motion trajectory of powder transfer equipment through change of design element as installation position and direction of motor, driving speed, mass unbalance, stiffness coefficient and installation position of support coil spring is presented. The design results, powder transfer equipment were able to know that fatigue destruction does not occur, and the reason is because maximum stress working on a basket structure is more very than fatigue strength small.

Keywords

References

  1. 神保元二 'The Recent Powder Technical Present Situation and Prospect,' Machinery & Equipment for Food Industry, Vol. 35, No.9, pp. 75-88, 1998
  2. 三逋靖, 'Recent Powder Technology and Device,' Machinery & Equipment for Food Industry, Vol. 34, No. 11, pp.75-88, 1997
  3. Choi, B.H., Jeong, C.K., Choi, S.H., 'Tooth Shape Design for the Screw Flights Cutting in Twin Screw Extruder,' Proceedings of the Korean Society of Precision Engineering Conference, pp.824-828, 2002.05
  4. 柴田力, 'Trouble Shooting and Countermeasure in Powder Process,' Machinery & Equipment for Food Industry, Vol. 40, No. 9, pp. 108-112, 2003
  5. Lee, B.S, 'Trouble Improvement Case of Machine Design,' Machine Design, Vol. 8, No. 5, pp. 60-66, 1993
  6. Lee, B.S, 'Trouble Improvement Case of Machine Design,' Machine Design, Vol. 8, No. 5, pp. 101-107, 1993
  7. Whal.A.M, 'Mechanical Springs,' McGraw-hill, 1963
  8. J.E. Shigley, C.R.mischke, 'Mechanical Engineering Design,' McGraw-hill, 1989
  9. Kwon, H.H, Choi, S.J, 'A Study on Design Method of the Cylindrical-Taper· Section Coil Spring,' Journal of the Korean Society of Precision Engineering, Vol. 15, No. 9, pp. 175-181, 1998