• Journal of Power System Engineering
• /
• v.17 no.5
• /
• pp.78-85
• /
• 2013

A high thermal conductivity material, namely graphene is treated by planetary ball milling machine to transport the heat by increasing the temperature. Experiments were performed to assess the heat transfer enhancement benefits of coating the bottom wall of copper substrate with graphene. It is well known that the graphene is unable to disperse into base fluid without any treatment, which is due to the several reasons such as attachment of hydrophobic surface, agglomeration and impurity. To further improve the dispersibility and thermal characteristics, planetary ball milling approach is used to grind the raw samples at optimized condition. The results are examined by transmission electron microscopy, x-ray diffraction, Raman spectrometer, UV-spectrometer, thermal conductivity and thermal imager. Thermal conductivity measurements of structures are taken to support the explanation of heat transfer properties of different samples. As a result, it is found that the planetary ball milling approach is effective for improvement of both the dispersion and heat carriers of carbon based material. Indeed, the heat transfer of the ground graphene coated substrate was higher than that of the copper substrate with raw graphene.

• Korean Journal of Applied Biomechanics
• /
• v.20 no.2
• /
• pp.239-243
• /
• 2010

The putting stroke accounts for 40~50% of total stroke for a golf rounding and most golfers have difficulties on the puting. Studies for the putting stroke have been conducted by analyzing various factors such as kinematics, kinetics, psychologic and physiologic parameters. A lot of devices were developed to support the studies. However there was no appropriate method to measure the position of the ball quantitatively. In this study, we developed a new measurement system to measure and evaluate the putting result. The developed system uses a USB camera to take the 2-dimensional image of the surface including the hole cup at the center of the image and the ball. The position of the ball is extracted as a set of distance and angle in polar coordinate system. We evaluated the new system with an indoor set-up for putting experiments and the system provided accurate measurement results. The proposed system can be combined with the other measurement systems such as 3D motion capture system and force plate without any restriction.

• The Korean Journal of Food And Nutrition
• /
• v.28 no.4
• /
• pp.517-526
• /
• 2015

This study was carried out to determine the depression symptoms and nutritional status of elderly females that ate congregate meals at lunch in rural Pocheon. The subjects were 18 elderly females aged over 65 ($75.7{\pm}4.6$ years) and information on smoking, subjective health status, depression symptoms and malnutrition risk were collected using a questionnaire administered with the help of trained research assistants. Measurements included mid-arm circumference and calf circumference. Food consumption for 3 days during breakfast and supper were determined by 24-hour recall and food consumption at lunch was determined as the difference between the amounts served and the plate waste. All data were compared between two age groups (${\leq}75$ and > 75). The subjects had the lowest nutrient adequacy ratio (NAR) for vitamin $B_6$ (0.523), followed by calcium and niacin and the lowest index of nutrient quality (INQ) for calcium (0.738). The older elderly had significantly lower NAR for vitamin $B_1$, vitamin $B_2$, vitamin $B_6$ and niacin as well as significantly lower mean adequacy ratio (MAR) compared to the young elderly. They also had significantly lower INQ for vitamin $B_1$ and vitamin C and significantly thinner arm circumference (28.3 cm vs. 31.3 cm). They consumed more than 40% of their daily intake for each nutrient at lunch. Higher proportions of nutrient intake from lunch provided evidence of the importance of congregate meals, suggesting that the government and society should support congregate meals to improve nutritional status.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.53-56
• /
• 2008

In this investigation, results of laboratory tests on six reinforce concrete flat plate interior connections with elongated rectangular column support which has been used widely in tall residential buildings are presented. The purpose of this study is to evaluate an effect of column aspect ratio(${\beta}$c=$c_1/c_2$) on the hysteretic behavior under earthquake type loading. The aspect ratio of column section was taken as 0.33${\sim}$3($c_1/c_2$=1/3, 1/1, 3/1). Other design parameters such as flexural reinforcement ratio of slab and concrete strength was kept constant as ${\rho}$=1.0%, 1.5% and $f){ck}$=40MPa, respectively. Gravity shear load($V_g$) was applied by 30 percents of nominal vertical shear strength(0.3$V_o$) of the specimen. Experimental observations on punching failure pattern, peak lateral-load and story drift ratio at punching failure, and stiffness degradation were achieved and discussed in accordance with different column aspect ratio.

• Journal of the Korean Institute of Rural Architecture
• /
• v.15 no.3
• /
• pp.17-24
• /
• 2013

This study examined and investigated architectural characteristics such as the use of buildings, the number of layers, and structure, and roof landscape characteristics such as roof types, materials, and color in rural villages which were located on the street on the assumption that the landscape of rural villages should be managed by considering visual aspects. The results were as follows. The commonest frequency was found in 'residence'(2/3) for the use of buildings and 'masonry structure'(2/3) for the structure. 'Wood structure' and 'light gauge steel structure(prefabricated structure)' were also commonly found. The results suggest that although many rural houses have partially improved by agricultural and fishery development projects and garden suburbs has been increased by city residents' desire for rural life, there have been still many old houses. Frequently used roof types were a gambrel roof and a hipped roof. Roof materials were mixed in several materials such as tiles, slate, panels, color steel plate, reinforced concrete, and asphalt shingles. Roof color was also mixed in several colors such as reddish N7 and N0.5 of Neutral color, 10R3/6 and 10R3/10 of R color, 7.5B4/10 and 7.5B7/8 of B color and 5G8/6 of G color. The result suggests that roof color impedes the landscape of rural villages on the street. Based on the results, some roofs of rural villages were improved by the support of the government or the local governments but there are still many old roofs. The mixture of improved roofs and old roofs mainly contributed to impeding the landscape of rural villages and it was probably caused by the lack of systematic landscape plans by individual improvement of buildings. Therefore, it is necessary to devise systematic landscape plans in consideration of local identity and neighboring environment. In particular, the guideline for roof color influencing a street landscape should be established.

• Journal of Embryo Transfer
• /
• v.22 no.4
• /
• pp.235-243
• /
• 2007

Our goal was to examine the effects of early denudation on the enucleation efficiency and developmental competence of embryos following somatic cell nuclear transfer (SCNT) and parthenogenetic activation (PA). Oocytes were denuded following 30 h of in vitro maturation (IVM) and then cultured with (D+) or without (D-) their detached cumulus cells for additional $10{\sim}14$ h. Control oocytes were denuded after $40{\sim}44$ h of IVM. The size of the perivitelline space was larger at 40 h of IVM ($11.7{\sim}11.8{\mu}m$) than at 30 h ($8.9{\mu}m;$ p<0.01). The distances between the metaphase II (M II) plates and the polar bodies (PBs) were shorter in D+ ($19.4{\mu}m$) and D- oocytes ($18.9{\mu}m$) than in control oocytes ($25.5{\mu}m;$ p<0.01). Enucleation rates following blind aspiration at 40 h of IVM were higher (p<0.01) in D+ (92%) and D- oocytes (93%) compared to controls (82%). Early denudation did not affect oocyte maturation or the in vitro development of SCNT and PA embryos. When SCNT embryos from D+ oocytes were transferred to four gilts, pregnancy was established in two pigs, and one of them farrowed three live piglets. In conclusion, early denudation of oocytes at 30 h of IVM could improve the enucleation efficiency by maintaining the M II plate and the PB within close proximity and support the in vivo development of SCNT embryos to term.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.402-405
• /
• 2006

Mobile IP has been designed to have mobile host users move from place to plate without changing their IP address. Ad-hoc network is a provisional network whose mobile host users construct networks by themselves without any assistance of infra structure network, using wireless interface. In this paper we discuss the scheme with which Ad-hoc network users ran access the Internet freely, using mobile IP protocol, and Ad-hot networks are access networks in the spotlight. In this paper we propose algorithm that support enhanced mobility between two Ad-hoc networks applying mobile IP at Ad-hoc routing protocol.

• Industry Promotion Research
• /
• v.4 no.2
• /
• pp.1-8
• /
• 2019

This research is a technology for cutting the insulation of the busbar (busbar) installed in the distribution panel or switchboard, the results of the study, first, the cutting unit and frame of the cutting unit including a housing attached to the upper and lower cutters, respectively Busbar coating laser cutting machine is installed on the top, characterized by consisting of a stopper for adjusting the coating cutting distance of the busbar. Second, the frame is installed with the guide bar in the longitudinal direction at the top so as to be located at the rear side end of the table, the post is installed vertically at the front and rear at the upper middle part, respectively, and cut to the table at the outer side of the front post. It is characterized by the formation of holes. Third, the supporter is fixedly installed on the upper part of the guide bar arranged in the frame, and is characterized by consisting of a cylinder and a support plate. The meaning of this study is to prevent the safety accidents of workers, to improve the efficiency of cutting work, and to prevent the occurrence of scratches on the surface of the busbar.

• Physical Therapy Rehabilitation Science
• /
• v.8 no.3
• /
• pp.125-133
• /
• 2019

Objective: To compare the postural control between non-specific chronic low back pain (NSCLBP) subgroups and healthy people during dynamic balance performance using a modified Star Excursion Balance Test (mSEBT). Design: Cross-sectional study. Methods: Eighteen NSCLBP subjects (9 active extension pattern [AEP], 9 flexion pattern [FP]), and 10 healthy controls were enrolled in this study. All subjects performed mSEBT on their dominant leg on a force plate. Normalized reach distance and balance parameters, including the center of pressure (COP) displacement and velocity, were recorded. Results: There were significant differences in mean reach distances in both posterolateral and posteromedial (PM) reach directions between AEP and healthy subjects (p<0.001) and between FP and healthy subjects (p<0.001). However, there were no significant differences among the three groups in the anterior reach direction. Also, the results showed no significant differences in mean COP variables (velocity and displacement) between pooled NSCLBP and healthy subjects. However, the subjects were reclassified into AEP, FP and healthy groups and the results showed a significant difference in mean COP velocity in the PM direction between AEP and FP subjects (p=0.048), and between AEP and healthy subjects (p=0.024). Conclusions: The findings in this study highlight the heterogeneity of the individuals with NSCLBP and the importance of identifying the homogenous subgroups. Individuals with AEP and FP experience deficits in dynamic postural control compared to healthy controls. In addition, the findings of this study support the concept of the Multidimensional Classification System.

• International journal of steel structures
• /
• v.18 no.5
• /
• pp.1617-1630
• /
• 2018

The crucial differences between conventional rail with split-type connectors and continuous welded rails are axial stress in the longitudinal direction and stability, as well as other issues generated under the influence of loading effects. Longitudinal stresses generated in continuously welded rails on railway bridges are strongly influenced by the nonlinear behavior of the supporting system comprising sleepers and ballasts. Thus, the track structure interaction cannot be neglected. The rail-support system mentioned above has properties of non-uniform material distribution and uncertainty of construction quality. The linear elastic hypothesis therefore cannot correctly evaluate the stress distribution within the rails. The aim of this study is to apply the nonlinear finite element method using the nonlinear coupling interface between the track and structural model and to illustrate the welded rail behavior under the loading effect and uncertain factors of the ballast. Numerical results of nonlinear finite analysis with a three-dimensional solid and frame element model are presented for a typical track-bridge system. A composite plate girder, modeled by solid and shell elements, is also analyzed to consider the behavior of the welded rail. The analysis result showed buckling under the independent calculations of load cases, including 'temperature change', 'bending of the supporting structure', and 'braking' of the railway vehicle. A parametric study of the load combination method and the loading sequence is also included in this analysis.