• 전자공학회논문지D
• /
• 제34D권1호
• /
• pp.8-13
• /
• 1997

An electric field due to point dipole within conductor-backed thin dielectric layer above the earth is calculated by using saddle point method When the dielectric layer is thin enough to support a cutoff mdoe, we show that the field may be approximated by sum of contributions of branch points of TE mode and poles of tM mode and that the branch points and poles contributions are interpreted as an evanescent lateral waves and leaky waves, respectively.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2002년도 춘계 총회 및 학술발표회
• /
• pp.35-41
• /
• 2002

Dense oxygen ionic conducting materials can be used for oxygen separation membranes at high temperatures. However, they show relatively low permeation flux because of their large resistances. To reduce resistances and improve the oxygen permeation flux, thin dense yttria-stabilized-zirconia (YSZ)/Pd composite dual-phase membranes were fabricated by a new approach that combines the reservoir method and chemical vapor deposition (CVD). A thin porous YSZ layer was coated on a porous alumina support by dip-coating the YSZ suspension. A continuous Pd phase was formed inside pores of the YSZ layer by the reservoir method. The residual pores of the YSZ/Pd layer were plugged with yttria/zirconia by CVD to ensure the gas tightness of the membranes. The oxygen permeation fluxes through these composite membrane were 2.0$\times$10$^{-8}$ mol/cm$^2$.s and 4.8$\times$10$^{-8}$ mol/cm$^2$.s at 105$0^{\circ}C$ when air and oxygen were used as the permeate gases, respectively. These oxygen permeation values are about 1 order of magnitude higher than those of pure YSZ membranes prepared under similar conditions.

• 한국세라믹학회지
• /
• 제48권5호
• /
• pp.458-462
• /
• 2011

The strength of ceramic was improved by lamination by suppressing the propagation of cracks with compressive residual stress in the face layer of the laminate. Hot pressed SiAlON+SiC/SiC/SiAlON+SiC laminate discs were fabricated for tailored residual stress. The residual stress in this laminate was studied by X-ray diffraction (XRD). There was considerable compressive residual stress in the face layer. A Finite Element Analysis (FEA) was performed to support the measured XRD results and to determine the stress field in the laminate. The residual stress measured by XRD had satisfactory agreement with the analytically calculated and FEA values. The measured value by XRD was -385 ${\pm}$ 20 MPa over most of the face layer. The calculated and FEA values were -386 MPa and -371MPa, respectively. FEA also showed significantly modified stresses and the maximum tensile stress near the edge region which are possible crack generators in the presence of flaws or contact damage.

• Structural Engineering and Mechanics
• /
• 제18권3호
• /
• pp.303-314
• /
• 2004

An artificial neural network (ANN) application is presented for flexural and axial vibration analysis of elastic beams with various support conditions. The first three natural frequencies of beams are obtained using multi layer neural network based back-propagation error learning algorithm. The natural frequencies of beams are calculated for six different boundary conditions via direct solution of governing differential equations of beams and Rayleigh's approximate method. The training of the network has been made using these data only flexural vibration case. The trained neural network, however, had been tested for cantilever beam (C-F), and both end free (F-F) in case the axial vibration, and clamped-clamped (C-C), and Guided-Pinned (G-P) support condition in case the flexural vibrations which were not included in the training set. The results found by using artificial neural network are sufficiently close to the theoretical results. It has been demonstrated that the artificial neural network approach applied in this study is highly successful for the purposes of free vibration analysis of elastic beams.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.135.2-135.2
• /
• 2010

Carbon nanotube(CNT) has been spotlighted as a promising candidate for catalyst support material for PEMFC (proton exchange membrane fuel cell). The considerable properties of CNT include high surface area, outstanding thermal, electrical conductivity and mechanical stability. In this study, to fully utilize the properties of CNTs, we prepared directly oriented CNT on carbon paper as a catalyst support in the cathode electrode. The CNT layer was prepared by a chemical vapor deposition(CVD) process. And the Pt particles were deposited on the CNT oriented carbon paper by impregnation and eletro-deposition method. The potential advantages of directly oriented CNT on carbon paper can include improved thermal and charge transfer through direct contact between the electrolyte and the electrode and enhanced exposure of Pt catalyst sites during the reaction.

• 경영과학
• /
• 제16권1호
• /
• pp.187-201
• /
• 1999

In this paper, we propose a multi-layered architecture of workflow management systems based on CORBA (Common Object Request Broker Architecture). The system aims to support product development processes in distributed environment. Many companies have started to adopt workflow management systems to manage and support their business processes. However, there are many problems in direct application of those systems to product development environments. These mainly resulted from the dynamic features of product development processes. It is strongly required to support dynamic processes as well as static and procedural ones in an integrated and consistent manner. To meet these requirements, a basic workflow management system has been developed as the core component of the integrated architecture. This performs the basic functions of workflow management system. Second, a dynamic workflow management system based on a bidding mechanism has been developed to manage processes that cannot be easily defined or are likely to be modified, Finally, an SGML workflow management system, which is the third layer in the architecture, has been developed to manage documents processing workflows by integration SGML documents contents and process information into the structured SGML document.

• 한국세라믹학회지
• /
• 제29권6호
• /
• pp.496-504
• /
• 1992

Alumina tubes suitable for the support of gas separation membranes have been prepared by the slipcasting technique. These supports have the average pore size of 0.1 ${\mu}{\textrm}{m}$ within the narrow distribution. The sol-gel dipcoating process of nanoparticulate sols is very sensitive to microstructure of the support, and the coating on the inside surface of the tube is found to be more successful than on the outside surface. Nanoparticulate silica sols (0.82 mol/ι) have been synthesized by an interfacial hydrolysis reaction between TEOS and high alkaline water. When coating an alumina tube with these sols, the minimum limits of the particle size and the aging time required for forming the coated gel layer at the given pH are provided. It is optimum to coat the support with less concentrated sols stabilized through aging for the appropriate time (more than 22 days) at the lower pH (pH 2.0) for producing a reproducible crack free thin film coating in composite membranes.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1506-1511
• /
• 2003

The present study proposes a new structure for a flat plate heat pipe which could embody a thin thickness, any shapes and high heat density a unit area. It is on the structure for the formation of vapor passages and the support of the case of the flat plate heat pipe. A screen mesh is used as the one. To verify the validity of the one, the flat plate heat pipe of 1.08mm thickness was made with a layer of the screen mesh with 14 and 100 mesh number respectively and tested. Here the screen mesh with 14 mesh number plays a role of the vapor passage and the support of the case and the screen mesh with 100 mesh number functions as the wick structure. T he results show that the screen mesh excellently carries out the function of the vapor passage and the support of the case.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 추계학술대회 초록집
• /
• pp.93-93
• /
• 2011

Nanostructures consisting of $TiO_2$ particles as a core and carbon as a shell ($TiO_2$@C) were prepared by heat treatment of $TiO_2$ nanoparticles at high temperature in a methane atmosphere. X-ray diffraction and transmission electron microscopy showed that a carbon shell layer was formed well. These structures were used as supports for platinum nanoparticles and the hybrid particles exhibit improved catalytic activity and stability toward ORR compared to Pt on a carbon black (Vulcan XC-72R). It is likely that enhanced catalytic properties of the Pt on $TiO_2$@C could be due to the stability of the core-shell support in comparison with carbon black support.

• Journal of Ubiquitous Convergence Technology
• /
• 제1권1호
• /
• pp.35-41
• /
• 2007

In mobile ad-hoc wireless networks, one of the most important challenging issues is how to conserve energy, maximizing the lifetime of route(networks) in the view points of both power and mobility of nodes. However, many transmission methods presented in the previous works can not satisfy these two objectives simultaneously. To obtain these two goals, in this paper we propose an architecture to support power saving transmission services with route stability in mobile ad-hoc wireless networks. The proposed architecture consists of two parts, the underlying route stability method to support route(network) lifetime and the power saving transmission methods. The performance evaluation of the proposed architecture is achieved via simulation and analysis.