• Geomechanics and Engineering
• /
• v.37 no.5
• /
• pp.511-525
• /
• 2024

Micropiled raft has been used to support the existing and new structures or to provide the seismic reinforcement of foundation systems. Recently, research on micropile or micropiled raft has been actively conducted as the usage of micropile has increased, and the reinforcement effect of pile for the raft, the pile installation methods, and methods for calculating the bearing capacity of micropiled raft have been proposed. In addition, existing research results show that the behavior of this foundation system is different depending on the pile conditions and can be greatly influenced by the characteristics of the upper or lower ground depending on the conditions of pile. In other words, considering that the micropile is a friction pile, it can be predicted that the reinforcing effect of micropile for the raft and the bearing capacity of micropiled raft may depend on the cohesion of upper soil layer depending on the pile conditions. However, existing studies have limitations in that they were conducted without taking this into account. However, existing studies have limitations as they have been conducted without considering these characteristics. Accordingly, this study investigated the reinforcing effect of micropile and the bearing characteristics of micropiled raft by varying the cohesion of upper soil layer and the stiffness of pile which affect the behavior of micropiled raft. In this results, the reinforcing effect of micropile on the raft also increased as the cohesion of soil layer increased, but the reinforcing effect of pile was more effective in ground conditions with decreased the cohesion. In addition, the relationship between the axial stiffness of micropile and the bearing capacity of micropiled raft was found to be a logarithmic linear relationship. It was found that the reinforcing effect of micropile can increase the bearing capacity of raft by 1.33~ 3.72 times depending on the cohesion of soil layer and the rigidity of pile.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.10B
• /
• pp.909-918
• /
• 2006

Recently, the qualities of the call and QoS of data service in mobile wireless IP networks inclusive of internet wired networks are very challenging issues. IntServ, DiffServ and MPLS model for supporting QoS in wired networks are representative models which are investigated generally up to now. While, MIPv4(Mobile IPv4) and MIPv6 are proposed to support mobility management for mobile wireless internet networks. But, MIPv4 and MIPv6 based UDP and TCP/IP protocol have many issues to be solved like efficient QoS and frequent handover management. In this paper, we propose a efficient management platform to support seamless data services and end-to-end QoS management in IP-based wireless mobility environments using transport layer protocol, SCTP which support multi-homing and multi-streaming. We used SCTP protocol and IntServ technology for end-to-end communications to support multi-homing and seamless QoS management in the IP-based mobile wireless networks.

• Membrane Journal
• /
• v.20 no.3
• /
• pp.235-240
• /
• 2010

The aim of this paper is to evaluate and compare the performances of forward osmosis (FO) membranes using different materials. The FO membranes were synthesized using interfacial polymerization method on hydrophobic polysulfone (PSf) and relatively hydrophilic polyethersulfone (PES) supports. The FO performance such as flux and back diffusion was measured. The resulting fluxes of PSf and PES FO membranes were $4.3\;L/m^2hr$ and $17.8\;L/m^2hr$, respectively. The flux of the PES FO membrane was higher than that of the PSf FO membrane. The results indicated that hydrophillictity of the support membrane is important for increasing flux in FO process. Moreover, with decreasing the support layer thickness, flux increased considerably.

• Korean Chemical Engineering Research
• /
• v.51 no.5
• /
• pp.580-586
• /
• 2013

In this paper, polymer composite membranes and ceramic composite membranes were prepared in order to compare differences in pervaporation performances relative to the support layers. PVDF was used for the polymer support layers, and $a-Al_2O_3$ was used for the ceramic support layers. For active layer was coated for PDMS, which is a rubbery polymer. The characterization of membranes were analysed by SEM, contact angle, and XPS. We studied performances relative to the composite membrane support layers in the ABE mixture solutions. The results of the pervaporation, the flux of the ceramic composite membrane was shown to be $250.87g/m^2h$, which was higher than that of polymer composite membranes, at $195.64g/m^2h$. However, it was determined that the separation factor of the polymer composite membranes was 31.98 which were higher than that of the ceramic composite membranes, at 20.66.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.5
• /
• pp.71-77
• /
• 2021

Recently, there is a demand for efficient program development of an IoT application support frameworks considering heterogeneous hardware characteristics. In addition, the scope of hardware support is expanding with the development of neuromorphic architecture that mimics the human brain to learn on their own and enables autonomous computing. However, most existing IoT IDE(Integrated Development Environment), it is difficult to support AI(Artificial Intelligence) or to support services combined with various hardware such as neuromorphic architectures. In this paper, we design an AI component abstract model that supports the second-generation ANN(Artificial Neural Network) and the third-generation SNN(Spiking Neural Network), and implemented an autonomous IoT IDE based on the proposed model. IoT developers can automatically create AI components through the proposed technique without knowledge of AI and SNN. The proposed technique is flexible in code conversion according to runtime, so development productivity is high. Through experimentation of the proposed method, it was confirmed that the conversion delay time due to the VCL(Virtual Component Layer) may occur, but the difference is not significant.

• Journal of Conservation Science
• /
• v.27 no.3
• /
• pp.313-322
• /
• 2011

The floral wall of Lee Sang-beom's House and Atelier, which is No. 171 of the Registrated Cultural Heritage was conserved. In addition, materials characteristics and manufacturing technique have revealed through the scientific analysis. As a result of the analysis, samples were divided into three sections; the support layer that is made from block bricks, the paint layer and the cement mortar layer on the paint layer for the reinforcement of the construction. The higher layer lies, the finer grains it has. Furthermore, a little it was generated a small quantity of pores and calcium carbonates ($CaCO_3$) generated due to aeration of cement mortar. The patterns of letters, animals and plants pattern were expressed in the paint layer by relief and openwork. The results of qualitative analysis of the pigments of the paint layer were detected components of carbon black (C), Fe oxide ($Fe_2O_3$) and oyster shell white ($CaCO_3$, or quicklime). On the other hands, as the conservation of the floral wall, stainless frames were set up for the structural stability, the cement mortar were removed from the surface and the partly damaged and cracked areas were filled with KSE Filler A, B.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.2
• /
• pp.108-114
• /
• 2015

Automated driving systems require a high level of performance regarding environmental perception, especially in urban environments. Today's on-board sensors such as radars or cameras do not reach a satisfying level of development from the point of view of robustness and availability. Thus, map data is often used as an additional data input to support these systems. An accurate digital map is used as a powerful additional sensor. In this paper, we propose a new approach for vehicle localization using a lane map and a single-layer LiDAR. The maps are created beforehand using a highly accurate DGPS and a single-layer LiDAR. A pose estimation of the vehicle was derived from an iterative closest point (ICP) match of LiDAR's intensity data to the lane map, and the estimated pose was used as an observation inside a Kalmanfilter framework. The achieved accuracy of the proposed localization algorithm is evaluated with a highly accurate DGPS to investigate the performance with respect to lateral vehicle control.

• Journal of the Korea Society of Computer and Information
• /
• v.22 no.2
• /
• pp.111-117
• /
• 2017

This study analyzes the relative importance of the introducing factors for the critical success factors in the implementation stage of the lifecycle of ERP system using Delphi technique and Analytic Hierarchy Process(AHP). In the 1st layer of the hierarchy, technical factor is evaluated as the most important factor among organizational, technical, and supplier factors. In the 2nd layer, choosing a proper ERP package is evaluated as the most important factor within 15 factors followed by process-oriented approach, technical suitability, minimized customization, integration and association of system with trading parter, association with legacy systems, and support and involvement of top management. As a result of this analysis enterprise should choose an ERP package that is suitable to its business environment, and make the best use of(take full advantage of) best practice that ERP package provides to optimize the existing business procedure or process(to approach the existing business procedure or process). This study also shows the range of customization of the features provided by the ERP package should be minimized.

• Journal of the Korean Home Economics Association
• /
• v.42 no.6
• /
• pp.89-101
• /
• 2004

The aim of this study is to investigate problems with both fit and abrasion of golf gloves through a survey of golf usage among golfers over the age of 30, as well as by analyzing the golf glove industry with an emphasis on the size system and marketing situation. In addition, this study aims to suggest the basic raw materials for improving the design of golf gloves through physical properties inspections. The results of the analyses support the following suggestions. First of all, dissatisfaction arose from improper measurement in glove length. The survey showed that most problems occur in the pinky finger, while only the length of the middle finger of the glove is recorded based on Korean Standard Anthropometries Measurement. Clearly, proper measurements of every finger need to be included in the system. Secondly, the survey results clearly indicated regions 7(palm area) and 3(second finger area) as the areas requiring reinforcement. While the method of patching another layer with the same material is commonly used in the current glove market, materials other than genuine leather are unable to complement the abrasion. This study suggests that another layer of refill type genuine leather, which scored best in the physical properties inspection, needs to be patched onto regions 7 and 3.

• Journal of Broadcast Engineering
• /
• v.8 no.3
• /
• pp.259-267
• /
• 2003

In this paper, we propose a media processor to provide interactive services in mobile multimedia broadcasting environments. The proposed system Is designed to support various functionalities, such as generation of MPEG-4 IOD (Initial Object Descriptor)/OD(Object Descriptor)/BIFS (Binary Format for Scene) data, encapsulation of MPEG-4 AVC (Advanced Video Coding)/BSAC (Bit Sliced Arithmetic Coding) stream and generated IOD/OD/BIFS data into SL (Sync Layer) packet, packetization of SL packet into TS (Transport Stream) packet and multiplexing. The proposed media processor can provide MPEG-4 based interactive services for users.