• Journal of the Korean Society of Radiology
• /
• v.82 no.1
• /
• pp.2-11
• /
• 2021

More than 4 million women undergo breast cancer (BC) screening with mammography each year in Korea. Digital mammography (DM) was introduced in 2000, and it has been reported to have a higher diagnostic accuracy than screen-film mammography (SFM) or computed radiography (CR) in women with dense breasts. According to a study using data from the National Cancer Screening Program for BC, the diagnostic accuracy of DM was higher than those of SFM and CR, regardless of age, breast density, and screening round. Currently, despite high supply rate among OECD countries, the distribution of DM equipment is approximately 35% in Korea. For quick replacement with DM, it will be necessary to improve its fee for the National Health Insurance and support an educational program for radiologists. In addition, efforts should be made to increase the accessibility of DM.

• Korean Journal of Radiology
• /
• v.23 no.8
• /
• pp.803-810
• /
• 2022

Objective: To investigate the clinical application of differential subsampling with Cartesian ordering (DISCO) contrast-enhanced (CE) magnetic resonance angiography for anterolateral thigh (ALT) flap transplantation, using operative findings as a reference. Materials and Methods: Thirty patients (21 males and nine females; mean age ± standard deviation, 45.5 ± 15.6 years) who were scheduled to undergo reconstruction with ALT flaps between June 2020 and June 2021 were included in the prospective study. Before ALT flap transplantation, patients were scanned using CE-DISCO imaging. All acquired DISCO images of the 60 lower limbs (both sides from each patient) were analyzed using maximum intensity projection and volume rendering methods. Two experienced radiologists were employed to examine the patterns of the lateral circumflex femoral artery (LCFA), its branches, and perforators and their skin termini, which were compared with the operative findings. Results: Using CE-DISCO, the patterns of the LCFA and its branches were clearly identified in all patients. Four different origins of the LCFA were found among the 60 blood vessels: type I (44/60, 73.3%), type II (6/60, 10.0%), type III (8/60, 13.3%), and type IV (2/60, 3.3%). Owing to a lack of perforators entering the skin, two patients did not undergo ALT flap transplantation. For the remaining 28 patients, the ALT flaps in 26 patients were successfully operated without flap reselection during the operation, while the remaining two patients underwent other surgical procedures due to the thin diameter of the perforator or injury of the perforator during the operation. The success rate of flap transplantation was 92.8% (26/28). All transplanted flaps exhibited good blood supply and achieved primary healing without infection or delayed healing. Conclusion: CE-DISCO imaging can be an effective method for preoperative perforator imaging before ALT flap transplantation.

• Animal Bioscience
• /
• v.37 no.6
• /
• pp.1130-1139
• /
• 2024

Objective: The daily maximum temperature and seawater level continuously increase as global warming continues. We examined the adaptability and production performance of heat-stressed goats with a supply of low-saline drinking water. Methods: Twelve Kacang and Kacang Etawah cross goats were exposed to two climatic conditions (control, 25℃ to 33℃, 83% relative humidity [RH], temperature humidity index [THI]: 76 to 86; and hot environment, 26℃ to 39℃, 81% RH, THI: 77 to 94) and two salt levels in drinking water (0% and 0.4% NaCl). The experimental design was a Latin Square (4×4) with four treatments and four periods (28 days each). Results: Temperature of the rectal, skin, and udder, and respiration rate rose, reached a maximum level on the first day of heat exposures, and then recovered. Plasma sodium rose at 0.4% NaCl level, while the hot environment and salinity treatments increased the drinking water to dry matter (DM) intake ratio. Water excretion was elevated in the hot environment but lowered by the increase in salinity. Total lying time increased, whereas change position frequency decreased in the hot condition. Lying and ruminating and total ruminating time increased and explained the enhanced DM digestibility in the hot conditions. Conclusion: The goats exhibited a high level of plasma sodium as salinity increased, and they demonstrated physiological and behavioral alterations while maintaining their production performances under increasing daily maximum temperatures.

• Korean Journal of Weed Science
• /
• v.31 no.2
• /
• pp.167-174
• /
• 2011

Weed control using cover crops has advantages of agricultural and environmental aspects which prevent soil erosion, nitrogen supply, improving soil physical properties, reduction of nitrate leaching, organic supply and control of weed occurrence. In this study, we evaluated the inhibitory effects of cover crops on the weed occurrence, growth and yield of soybean in cover crop-soybean cropping system. The treatments were consisted of 4 different mulching system such as crimson clover (Trifolium incarnatum) residue, hairy vetch (Vicia villosa) residue, rye (Secale cereale) residue and Polyethylene plastic(P.E.) mulch with no mulch treatment (control). Three cover crops were grown throughout the winter and were cut in next spring. And then 13 days old soybean seedlings were transplanted in each treatment field on $4^{th}$ June. Crimson clover, hairy vetch and rye mulch treatments reduced weeds density compared to control (73.0%, 98.0% and 85.3% respectively), on $26^{th}$ May. However, weed inhibition rate of crimson clover mulch treatment was sharply decreased to 4.17% on $6^{th}$ August, while hairy vetch and rye mulch treatments were continued high weed inhibition rate with 87.6% and 72.0% respectively. There was no inhibition effect of perennial, winter annual and broadleaf weeds inhibition in crimson clover mulch treatment. Height of soybean in crimson clover, hairy vetch and P.E. mulch treatment was 6.9%, 20.2% and 22.0% higher than that of control. But height of soybean in rye mulch treatment was lower than control on $13^{th}$ July. At harvesting, yields of soybean were in order of hairy vetch mulch treatment${\fallingdotseq}$ P.E. mulch treatment > crimson clover mulch treatment ${\fallingdotseq}$ rye mulch treatment > control.

• Fire Science and Engineering
• /
• v.15 no.1
• /
• pp.23-33
• /
• 2001

The utility tunnels are the important facility as a mainstay of country because of the latest communication developments. However, the utilities tunnel is difficult to deal with in case of a fire accident. When a cable burns, the black smoke containing poisonous gas will be reduced. This black smoke goes into the tunnel, and makes it difficult to extinguish the fire. Therefore, when there was a fire in the utility tunnel, the central nerves of the country had been paralyzed, such as property damage, communication interruption, in addition to inconvenience for people. This paper is based on the fire occurred in the past, and reenacting the fire by making the real utilities tunnel model. The aim of this paper is the scientific analysis of the character image of the fire, and the verification of each fire protection system whether it works well after process of setting up a fire protection system in the utilities tunnel at a constant temperature. The fire experiment was equipped with the linear heat detector, the fire door, the connection water spray system and the ventilation system in the utilities tunnel. Fixed portion of an electric power supply cable was coated with a fire retardant coating, and a heating tube was covered with a fireproof. The result showed that the highest temperature was $932^{\circ}c$ and the linear heat detector was working at the constant temperature, and it pointed at the place of the fire on the receiving board, and Fixed portion of the electric power supply cable coated with the fire retardant coating did not work as the fireproof. The heating tube was covered with the fireproof about 30 minutes.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.3
• /
• pp.75-85
• /
• 2009

This work proposes a 13b 100MS/s 0.13um CMOS ADC for 3G communication systems such as two-carrier W-CDMA applications simultaneously requiring high resolution, low power, and small size at high speed. The proposed ADC employs a four-step pipeline architecture to optimize power consumption and chip area at the target resolution and sampling rate. Area-efficient high-speed high-resolution gate-bootstrapping circuits are implemented at the sampling switches of the input SHA to maintain signal linearity over the Nyquist rate even at a 1.0V supply operation. The cascode compensation technique on a low-impedance path implemented in the two-stage amplifiers of the SHA and MDAC simultaneously achieves the required operation speed and phase margin with more reduced power consumption than the Miller compensation technique. Low-glitch dynamic latches in sub-ranging flash ADCs reduce kickback-noise referred to the differential input stage of the comparator by isolating the input stage from output nodes to improve system accuracy. The proposed low-noise current and voltage references based on triple negative T.C. circuits are employed on chip with optional off-chip reference voltages. The prototype ADC in a 0.13um 1P8M CMOS technology demonstrates the measured DNL and INL within 0.70LSB and 1.79LSB, respectively. The ADC shows a maximum SNDR of 64.5dB and a maximum SFDR of 78.0dB at 100MS/s, respectively. The ABC with an active die area of $1.22mm^2$ consumes 42.0mW at 100MS/s and a 1.2V supply, corresponding to a FOM of 0.31pJ/conv-step.

• 한국해양학회지
• /
• v.30 no.5
• /
• pp.480-492
• /
• 1995

Petrographic investigation has been carried out to determine the composition of the beach sediments and the affecting factors which have controlled their compositional variations from Hyupjae, Aeweol, Iho, Samyang, Hamdeok, Sehwa, Pyoseon, Jungmun, and Hwasun areas along the coast of the Cheju Island. Average mean sizes of the beach sediments are Hyupjae 2.2ø, Aeweol 0.8ø, Iho 1.4ø, Samyang 2.4ø, Hamdeok 1.6ø, Sehwa 1.5ø, Pyoseon 2.1ø, Jungmun 0.4ø, and Hwasun 0.9ø, thus, aries from 0.4 to 2.4ø. The beach sediments from Pyoseon and Hwasun areas are poorly sorted, those from Aeweol and Jungmun areas are moderately sorted and those from the rest of the areas are moderately well sorted. While-colored beach sediments in Hyupjae, Aeweol, Hamdeok, Sehwa, and Pyoseon areas are mostly composed of calcareous shells (more than 85%) such as mollusk, red algae, benthic foraminiferas, etc., whereas volcanic rock fragment is the dominant component of the black-colored beach sediments in Iho, Samyang, and Hwasun areas. Especially, the relatively white-colored beach sediment in Jungmun area, which is on e of the carbonate-dominant areas, shows a higher content of rock fragments than the other carbonate-dominant areas. The beach sediments in Pyoseon area show a high content of carbonate intercalates. Considering the contributions by organisms according to grain size, grains with the size range of 1∼2ø are mostly composed of calcareous red algae fragments, and grains with the size range of 2∼3ø consist of mollusk fragments. It is also notable that bryozoan fragments comprise about 48% of the sediment in Samyang area with the size range of 0∼1ø. The composition of the beach sediments in Cheju Island appears o be controlled by the riverine supply rate of volcanic rock fragments, the lithology of the rocks distributed ear the beaches, the direction of alongshore currents, and the direction of storms, etc.. It is suggested that the beach sediments in Iho and Samyang areas show black color because of the higher supply rate of the volcanic rock fragments from the nearby rivers, whereas those in the rest of the areas show white color due to the relatively lower content of volcanic rock fragments and higher content of carbonate components transported from shallow marine environment. In Hwasun area, the content of volcanic rock fragments is high, and they are directly from the tuffaceous rocks distributed nearby. Also, the volcanic rock fragments in Jungmun area are transported not only from the rivers nearby but also from the nearby tuffs by storm activities. The beach sediment in Pyoseon area contains a high content of carbonate intercalates, which formed in the nearby shallow marine environment through marine cementation. This indicates that active marine cementation occurs in shallow marine environment near Pyoseon area.

• Journal of agricultural medicine and community health
• /
• v.28 no.2
• /
• pp.1-14
• /
• 2003

Objectives: This paper introduces need and supply level of rural mental health care service and especially focuses on the evaluation for the community mental health programs of Public Health Centers(PHCs) in rural areas as the facilities for primary mental health care. Methods: We defined the need as prevalance rate and service utilization rate, for which reviewed the results of the epidemiological study of mental disorders using Korean Composite International Diagnostic Interview surveyed on a nationwide scale in 2001. Supply was appraised in terms of psychiatric beds and primary mental heath care facilities such as private psychiatric clinics, facilities for social rehabilitation, PHCs running community mental health programs. For this, we reveiwed a variety of annual reports related mental health published by Ministry of Health and Welfare. To evaluate the community mental health programs of PHCs in rural areas, we selected. randomly samples out of the 3rd community health plans including the contents of community mental health programs, which submitted by 89 rural counties and 44 cities mixed with rural areas, and used the program's guideline established by central government as a standard. Results: Prevalence rates of major psychiatric diseases such as schizophrenia, alcoholism, major depression, anxiety disorder were higher in rural area than in urban area and 8.9% of psychiatric patients in both areas stayed at homes contacted with mental health manpower more than one time during the last year. Psychiatric beds were sufficiently supplied, but urban area had less beds than rural area contrary to general health care service. Psychiatric clinics were supplied very insufficiently in rural areas and PHCs bridged the gap instead. However rural PHCs got less financial support for community mental health programs from higher positioned agencies than urban PHCs. Rural community health programs not supported hardly worked out. Conclusions: Central government should consider a special policy for rural primary mental health care, because private psychiatric clinics can't be introduced in rural areas due to demand-deficiency and the financial independence of rural counties was very vulnerable.

• Environmental and Resource Economics Review
• /
• v.14 no.2
• /
• pp.519-547
• /
• 2005

The aim of this study is to analysis how economic welfare lost happens within the present korea seasonal and time period electricity pricing system and find out reasonable electricity price system acceptable during the transitional period of korea electricity industry restructuring To analyze economic welfare lost in the electricity industry, in advance seasonal and time periodic 9 demand curves(summer, spring ＆fall, winter/peak-load time, middle-load time, low-load time) and one market supply curve are made and then using these demand and supply curve, seasonal and time periodic market equilibrium prices is calculated. Finally, comparing these market equilibrium prices with present regulated classified seasonal and time periodic prices, the whole economic welfare lost in the electricity industry is calculated. The result of this study shows that in 2002, the total economic welfare lost in electricity industry is 137,770 million Won and under present price system, the worst welfare lost is happening seasonally in spring ＆ fall, time periodically in the middle-load time. Specifically analyzing the characteristics of welfare lost, especially on the industry customers and service customers which are applied in seasonal and time periodic pricing, for the industry customers, the welfare lost calculated in this class occupies 51% of the total welfare lost in the whole electricity industry and the worst welfare lost is happening seasonally in spring ＆ fall, time periodically in the middle-load time. For service customers, the welfare lost calculated in this class occupies 13% of the total welfare lost in the whole electricity industry and the worst welfare lost is happening seasonally in summer, time periodically in the peak time Finally, this study was made based on the year of 2002 and KEPCO has practiced two times of rate change until now. The result of rate change was positively analyzed in the direction of economic welfare improvement(welfare improvement achieved by 16.3% compared to 2002 result).

• Journal of Technology Innovation
• /
• v.26 no.3
• /
• pp.37-68
• /
• 2018

Since the 20th century, automobiles, which are the most common means of transportation, have been evolving as the use of electronic control devices and automotive semiconductors increases dramatically. Automotive semiconductors are a key component in automotive electronic control devices and are used to provide stability, efficiency of fuel use, and stability of operation to consumers. For example, automotive semiconductors include engines control, technologies for managing electric motors, transmission control units, hybrid vehicle control, start/stop systems, electronic motor control, automotive radar and LIDAR, smart head lamps, head-up displays, lane keeping systems. As such, semiconductors are being applied to almost all electronic control devices that make up an automobile, and they are creating more effects than simply combining mechanical devices. Since automotive semiconductors have a high data rate basically, a microprocessor unit is being used instead of a micro control unit. For example, semiconductors based on ARM processors are being used in telematics, audio/video multi-medias and navigation. Automotive semiconductors require characteristics such as high reliability, durability and long-term supply, considering the period of use of the automobile for more than 10 years. The reliability of automotive semiconductors is directly linked to the safety of automobiles. The semiconductor industry uses JEDEC and AEC standards to evaluate the reliability of automotive semiconductors. In addition, the life expectancy of the product is estimated at the early stage of development and at the early stage of mass production by using the reliability test method and results that are presented as standard in the automobile industry. However, there are limitations in predicting the failure rate caused by various parameters such as customer's various conditions of use and usage time. To overcome these limitations, much research has been done in academia and industry. Among them, researches using data mining techniques have been carried out in many semiconductor fields, but application and research on automotive semiconductors have not yet been studied. In this regard, this study investigates the relationship between data generated during semiconductor assembly and package test process by using data mining technique, and uses data mining technique suitable for predicting potential failure rate using customer bad data.