• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.1117-1119
• /
• 2001

This paper describes the forward type pulse power supply using a Power-MOSFET in the view of commercialization. The principle of basic operating and the operating characteristics of the forward type pulse power supply are estimated by the switching frequency, coupling factor and duty ratio. It is shown that theoretical and experimental results are in good agreement by comparing simulation and experimental results when a lamp type ozonizer can be used as a load. Also, experimental results indicate that the discharge and ozone concentration characteristics of the manufactured pulse power supply is more improved compare to the conventional pulse power supply[5]. This proposed supply show that it can be practically used as a pulse power supply in various environment improvement facilities.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2005.05a
• /
• pp.651-657
• /
• 2005

This study figures out the objectives of supply chain integration and proposes a conceptual framework for classifying the type of supply chain integration in order to help developing supply chain integration strategy. We figure out the objectives of supply chain integration by structural integration and functional integration and then develop a conceptual framework for classifying the type of supply chain integration by combining the clusters of structural integration factors and functional integration factors. Using the framework, a firm would be able to figure out which type of supply chain it belongs to and develop appropriate supply chain integration strategy.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.1167-1171
• /
• 1993

A highly efficient hydropneumatic water supply system type BGY is designed and built in accordance with ISO standard. The technical features of BYG type pump unit can be summarized as follows: - reduce hydropneumatic tank capacity at the ratio of 1/10 - 1/30 compared with conventional method. - ISO standard pumps can be used. - the development of highly efficient water supply system type BYG is based on long-term experiences with the proven constant pressure water supply technique which minimize pressure fluctuation, rapid pilsation, etc. The text contains the operation principle of BYG type water supply system, introduction of closed cycle control process focused on Mini PC and experimental results of type BYG-IVS-90x45.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.52 no.7
• /
• pp.335-342
• /
• 2003

This paper presents a forward type high voltage pulse power supply for high voltage small current, which can be designed as a simple circuit configuration and managed easily using Power-MOSFET in the view of commercialization. According to the switching frequency, coupling factor(k) and duty ratio(D), the Principle of basic operation and the characteristics of the proposed pulse power supply are estimated. Simulation results have demonstrated the feasibility of the proposed pulse power supply. Also experimental results are presented to verify theoretical discussion with a lamp type ozonizer as a load. For studying the application at the part of environment of water, When ozonizer gas reacts with a colon bacillus, the sterilization characteristics of a colon bacillus according to the ozone concentration and response time have been investigated. This proposed pulse power supply will be able to be practically used as a pulse power supply in various environment improvement facilities like sterilization of colon bacillus, deodorization, and Nox gas elimination.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.758-761
• /
• 2003

We have designed 5 V/500 mA transless type power module by using semiconductor switching technique, key technique for small size of power supply system. The power module is suitable to a small sized electronic system using a single power supply. It is composed of switching circuit using voltage drop type chopper method, control circuit, voltage detect circuit, and constant voltage circuit, and is fabricated to hybrid-IC type. The switching regulator power supply circuit, designed in this study, has satisfied the electrical characteristics of 5 V/500 mA transless type power module.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.35 no.7
• /
• pp.45-52
• /
• 2019

In recent years, there has been a demand for a residential supply model that can actively and flexibly cope with various housing demands in the changing paradigm of public rental housing. This study focuses on the two-step supply system that has been studied in Japan. It was used to examine and analyze cases to recommend a supply plan that can be used for domestic public rental housing. In more detail, the literature review of the two-step supply system discloses that four types by supply methods (A-1, A-2, B-2, and C-2) and four types of relationship (construction and management combine entities type, management entity type, construction entity type, a separated entity type) can be categorized. In addition, from the actual case study, it revealed that the way of linking and supplying activities among the entity can have a great influence on "ease of supply (supply)", "diversity of housing demand (diversity)," and "quality of construction (construction)". "Ease of supply (supply)" refers to whether the construction entity is separated, and the owner is a manager. "Diversity" refers to whether the management subject is separated, and if the owner is also the constructor or the manager. "Construction" is whether the management entity is connected and managed by the management entity and can be evaluated in "Good", "Middle", and "Bad" level. As a summary, even if the existing public rental housing in Korea can be separated into a skeleton and infill system, the result suggested that it has a limitation on response to residential demand. In addition, the paper was able to propose an improved plan to make the infill as a secondary operator.

• Journal of The Korean Association For Science Education
• /
• v.34 no.1
• /
• pp.1-9
• /
• 2014

This study aimed to explore the over-efficacy in problem solving and overconfidence of knowledge of students performing assessments in two different test formats: multiple-choice and supply-type. Two hundred and four female middle school students participated in this study. Multiple-choice and supply-type formats of tests on photosynthesis were used, and each item contained scales indicating one's self-efficacy on problem-solving and confidence of knowledge. The results showed that the correlation coefficients of performance between the two different assessment formats were less than 0.5 and the correlation coefficients between efficacy/confidence and actual performance were less than 0.45. Moreover, students tended to exhibit more over-efficacy and overconfidence in multiple-choice formats. The percentage of over-efficacy and overconfidence was higher in the group that completed the multiple-choice test first followed by the supply-type assessment than in the group that started with the supply-type followed by the multiple-choice assessment. From this study, it can be suggested that more use of supply-type assessment is required in science education. If test administrators require the combination of both multiple-choice and supply-type in an assessment, the supply-type assessment format should come first so that students can maintain the appropriate level of efficacy and confidence. In addition, science educators need to develop new learning programs to enhance students' self-monitoring skills of their problem-solving ability and knowledge.

• Journal of Korean Institute of Industrial Engineers
• /
• v.16 no.1
• /
• pp.51-58
• /
• 1990

A deterministic capacity expansion planning model for a two-capacity type facility is analyzed to determine the sizes to be expanded in each period so as to supply the known demands for two distinct capacity type(product) on time and to minimize the total cost incurred over a finite planning horizon of T periods. The model assumes that capacity unit of the facility simultaneously serves a prespecified number of demand units of each capacity type, that capacity type 1 can be used to supply demands for capacity type 2, but that capacity type 2 can't be used to supply demands for capacity type 1. Capacity expansion and excess capacity holding cost functions considered are nondecreasing and concave. The structure of an optimal solution is characterized and then used in developing an efficient dynamic programming algorithm that finds optimal capacity planning policy.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.468-468
• /
• 1991

The variable-frequency type water supply equipment, which adopts the variable-voltage and variable-frequency converter(VVVF converter) to govern automatically the rotating speed of a pump, can save 15-20% of power, as compared with a throttle-controlled pump device or an airpressurized water supply equipment, and is finding a wide application. However, it still has some disadvantages : greater pressure fluctuations during switching over the pump and prolonged low-effeciency running of the pump in the case of small consumption of water. Therefore, it is difficult to apply the equipment to the fire water supply system where the water should not be put into use unless a fire takes place, and the water pressure in pipelines should permanently remain constant. This paper introduces the automatic regulation principle of the variable-frequency type air-pressurized water supply equipment (hereafter referred to as simply BFQS equipment) for dual purposes of daily life and fire control, which combined both technologies of speed governing by a converter and air-pressurized water supplying, then discusses some problems related to automatic control, and finally gives the experimental results of an embodiment-BPQS-100-50 water supply equipment.

• Journal of Korean Institute of Industrial Engineers
• /
• v.37 no.4
• /
• pp.279-288
• /
• 2011

The past researches focused on the supply chain network that consists of factories, distribution centers and retailers for single product type. This research is required because the factory for single product type is advanced to reconfigurable type in order to produce various products, according to customers' various purchase forms and time. This research is also required because in the past researches, the material flows from factories to distribution centers and from distribution centers to retailers, but recently, there are material flows between distribution centers. The supply chain network in this research consists of reconfigurable manufacturing system, multi-layered distribution centers, and retailers. A simulator is developed to analyze the material flow on the supply chain network. The developed simulator is web-based designed by using Java Server Page and MS-SQL, so as to maximize the convenience for users.