• 제목/요약/키워드: Supplementary Features

검색결과 59건 처리시간 0.027초

트리즈와 공리설계 기법에 의한 사출제품 부형상 설계 (A Study on Supplementary Features of Injection-Molded Parts Using TRIZ and Axiomatic Design)

  • 이재철;허용정
    • 한국산학기술학회:학술대회논문집
    • /
    • 한국산학기술학회 2010년도 춘계학술발표논문집 2부
    • /
    • pp.1145-1148
    • /
    • 2010
  • 우리 생활에서 큰 비중을 차지하고 있는 플라스틱은 그 사용 정도가 점점 증가하고 있는 추세이다. 그중에서도 플라스틱은 사출성형제품에서 가장 많이 사용한다. 사출성형의 제품은 높은 정밀도와 긴수명이 요구되며, 품질, 가격, 납기에 대해 사용자의 욕구를 충족시켜줄 수 있어야한다. 하지만 플라스틱은 열이나 하중 등 사용 환경에 따라 변하는 결점을 가지고 있으므로 일용잡화나 케이스류, 장식품 등의 일반적인 용도 이외에는 사용에 한계가 있다. 그러므로 설계자는 보다 과학적이고 합리적인 이론적 지식이 필요하다. 이에 사출성형 제품의 합리적인 설계를 위해 공리적 설계 기법을 이용하여 보다 좋은 설계를 수행하고 트리즈 기법을 활용함으로써 사출성형 제품의 문제들을 창의적으로 접근해봄으로써 문제 해결을 시도하려는 것이다.

  • PDF

오염지하수출의 미생물학적 복원기술 (BIOLOGICAL REMEDIATION OF CONTAMINATED AQUIFER)

  • 배우근
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 1992년도 폐기물 매립지의 공학적 특성과 개량기술
    • /
    • pp.1-18
    • /
    • 1992
  • The contaminatlon of soil and groundwater by leachate from impmperly managed landfills, or by cheiicals and gasoline leaked flu underground storage tanks has buou a serious urldwide environmental problei. Most of those contaminants are adsorptive and absorptive into soul, while they are hardly soluble in water. Thus, the rate of self purification is very slow, causing persistent problems in water use and environmental protection when the contamination is left untreated. Biological remediatlon technologies utilize the ertraordlnary caperbllity of microorganisms In degrading a tilde spectrum of organic compounds. Among them, an in situ bioremediation technology Involves injection of supplementary materials into the subsurfce in order to bring about a significant Increase in the microbial activity. The Increased microbial activity helps remove the pollutants in situ, that is, without digging out contaminants, soil, or water. This paper focused on the features, possibilities, and limitations of the bioremedition technology.

  • PDF

Relative Difficulty of Various English Writings by Fuzzy Reasoning and Its Application to Selecting Teaching Materials

  • Ban, Hiromi;Dederick, Toby;Nambo, Hidetaka;Oyabu, Takashi
    • Industrial Engineering and Management Systems
    • /
    • 제3권1호
    • /
    • pp.85-91
    • /
    • 2004
  • The writing styles of TIME and Newsweek are analyzed using a specially developed linguistic program. These two news magazines were chosen because of their wide popularity. As for the results, it became obvious that both the frequency curve of words and that of characters have not changed for the past 60 years. Also, we have found that the frequency curves have some inflection points and that the genre of English writings can be identified by these points. After counting the percentage of required vocabulary for junior high school students and high school students in English writings, we can derive the relative difficulties of them using fuzzy reasoning. Fuzzy rules are constructed using features of the characteristic curves. We feel it would be a good guide index when selecting textbooks or supplementary readers.

한국형 EMS용 자동발전제어(AGC) 프로그램 개발 (AGC(Auto Generation Control) Program Development in K-EMS)

  • 박민수;전영환;이정호;민상원;오태규;이진수;이효상;서은성
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2007년도 제38회 하계학술대회
    • /
    • pp.414-415
    • /
    • 2007
  • AGC (Automatic Generation Control) is supplementary tool for area frequency control in EMS(Energy Management System). This pater addresses the key features of AGC function in KEMS which is under development.

  • PDF

사출제품 및 금형의 통합적 설계지원을 위한 지식형 CAD 시스템 (A Knowledge-based CAD System for product and Mold Design in Injection Molding)

  • 허용정
    • 한국정밀공학회지
    • /
    • 제12권10호
    • /
    • pp.32-39
    • /
    • 1995
  • The design of injection molded polymeric parts has been done empirically, since it requires profound knowledge about the moldability and causal effects on the properties of the part, which are not available to designers through current CAD systems. An interactive computer-based design system is developed in order to realize the concept of rational design for the productivity and quality of mold making. The knowledge-based CAD system is constructed by adding the knowledge -base module for mold feature synthesis and appropriate CAE programs for mold design analysis in order to provide designers, at the initial design stage, with comprehensive process knowledge for feature synthesis, performance analysis and feature-based geometric modeling. A knowledge-based CAD system is a new tool which enables the concurrent design with integrated and balanced design decisions at the initial design stage of injection molding.

  • PDF

직금·자수에 사용된 금사의 형태와 특징 비교 고찰 (Study on the Form and Character of Gold Thread in Weave with Supplementary Gold Wefts·Embroidery)

  • 심연옥;이선용
    • 복식
    • /
    • 제63권7호
    • /
    • pp.79-93
    • /
    • 2013
  • In the Korean literature, records of systematic gold thread manufacturing such as gold foil(金 箔匠), gold foil bonded with fabrics(付金匠), gold foil bonded with paper materials(金箋紙匠), refining gold(鍊金匠), cutting gold(裁金匠), and making gold thread(絲金匠) can be easily found. We can infer from these literatures that the Korean people used to make gold threads. However, is not existent the gold thread making technique. Thus, a research was done using 67 pieces of gold thread artifacts used in textiles craft of Korea, China and Japan. The purpose of this research was to identify the characteristics of the Korean gold thread by studying the artifacts' form classification, gold foil, glue and the base. First, gold thread is divided into flat gold thread and wrapped gold thread. Wrapped gold thread was made in more various methods such as with a paper on the flat gold thread, metal thread and wrapped gold thread with gold foil on top. Compared to the flat gold thread, wrapped gold thread uses a thread that has a thinner and wider. Through this analysis, even making of the base of the gold threads was different according to the type. Secondly, we looked into the characteristics of materials according to form structure of the gold thread. After analysis of experiment results, we could know that to attach Korean gold thread, glue and the mixture of materials such as Red soil(朱土) was also added. The kinds of the base of gold threads were identified as paper, leather and intestines. Among those materials, for paper, Korea's Dakji, China's Sangpiji(桑皮紙) and Jukji(竹紙) and Japan's Anpiji(雁皮紙) seemed to have all been used, so because of the difference among countries, we can prove that Korea has also produced gold thread. By looking at the research, the base of gold threads and making features hugely vary according to the area.

삼축압축시험에 의한 모래-점토 복합시료의 전단거동 특성 (Characteristics of Shear Behavior for Sand-Clay Composite by Triaxial Test)

  • 이진수;김재일;이강일
    • 한국지반신소재학회논문집
    • /
    • 제5권4호
    • /
    • pp.19-25
    • /
    • 2006
  • 모래-점토 복합시료의 제반 전단특성을 규명하기 위하여 연약지반에 설치한 배수재로서의 모래기둥의 직경(dw)과 배수영향원의 직경(de)비 즉, 배수간격비(n=de/dw), 모래기둥의 밀도 및 모래기둥과 주변 연약토의 강성을 달리한 공시체를 제작하여 실내 삼축압축시험을 실시하였다. 또한 모래기둥을 토목섬유등의 보강재로 감싼 경우에 있어서 지반의 보강정도 및 효과에 대해서도 시험이 이루어 졌다. 삼축압축시험 결과, 모래기둥의 직경과 밀도가 커질수록 전단강도가 증가하는 일반적인 경향을 보이나, 모래기둥을 보강재료로 감싼 경우의 전단강도 증가가 매우 크다. 그리고 배수간격비가 3이하를 경계로 하여 그 증가정도가 뚜렷하게 나타나고 모래의 전단거동과 유사하다. 간극수압계수는 배수간격비가 작아질수록 감소하는 경향으로 전단강도 결과에서와 같이 배수간격비가 3~4이하에서는 그 감소 정도가 크다.

  • PDF

다중스펙트럼 기반 벽화 밑그림 영상 모자익 기법 (Multispectral Mural Underdrawing Mosaic Technique)

  • 이태성;권용무;고한석
    • 대한전자공학회논문지SP
    • /
    • 제41권5호
    • /
    • pp.175-183
    • /
    • 2004
  • 본 논문은 적외선 파장대의 벽화 밑그림영상과 가시광선 파장대의 패턴영상을 이용한 다중영상 정합 기법과 적응적 중첩영역 병합 기법을 이용하여 고해상도 적외선 벽화 밑그림 영상을 생성하기위한 영상 모자익 기법을 제안한다. 기존의 영상 모자익 기법은 특징이 없는 대상에 대해서 정합을 적용하기가 힘들었다 그리고 중첩영역의 크기에 따라 정합과 병합의 오차가 상반되는 현상이 발생한다. 이러한 문제를 해결하기 위해 본 논문에서는 첫 번째로, 영상에서 주목할 만한 특징이 없는 경우에도 프론젝터를 사용하여 패턴영상을 획득하고 의사 칼라 영상을 획득하여 정합을 가능하게 하였다. 두 번째, 인접한 영상간의 최소 병합 오차를 가지는 중첩영역을 찾아서 그 영역에 대해서만 병합을 수행함으로서 흐림현상을 해결하였다. 결과적으로 제안한 방법이 기존의 모자익 방법보다 더 효과적이고 효율적인 것을 확인하였고, 또한 적외선 벽화 밑그림 영상의 모자익에 더 적당한 것을 확인하였다. 실험 결과는 이 알고리듬의 강건함과 정확성을 보여준다.

Sequence-based 5-mers highly correlated to epigenetic modifications in genes interactions

  • Salimi, Dariush;Moeini, Ali;Masoudi?Nejad, Ali
    • Genes and Genomics
    • /
    • 제40권12호
    • /
    • pp.1363-1371
    • /
    • 2018
  • One of the main concerns in biology is extracting sophisticated features from DNA sequence for gene interaction determination, receiving a great deal of researchers' attention. The epigenetic modifications along with their patterns have been intensely recognized as dominant features affecting on gene expression. However, studying sequenced-based features highly correlated to this key element has remained limited. The main objective in this research was to propose a new feature highly correlated to epigenetic modifications capable of classification of genes. In this paper, classification of 34 genes in PPAR signaling pathway associated with muscle fat tissue in human was performed. Using different statistical outlier detection methods, we proposed that 5-mers highly correlated to epigenetic modifications can correctly categorize the genes involved in the same biological pathway or process. Thirty-four genes in PPAR signaling pathway were classified via applying a proposed feature, 5-mers strongly associated to 17 different epigenetic modifications. For this, diverse statistical outlier detection methods were applied to specify the group of thoroughly correlated genes. The results indicated that these 5-mers can appropriately identify correlated genes. In addition, our results corresponded to GeneMania interaction information, leading to support the suggested method. The appealing findings imply that not only epigenetic modifications but also their highly correlated 5-mers can be applied for reconstructing gene regulatory networks as supplementary data as well as other applications like physical interaction, genes prioritization, indicating some sort of data fusion in this analysis.

인플루언서 속성 분석 기반 추천 시스템 (Influencer Attribute Analysis based Recommendation System)

  • 박정련;박지원;김민우;오하영
    • 한국정보통신학회논문지
    • /
    • 제23권11호
    • /
    • pp.1321-1329
    • /
    • 2019
  • 소셜 정보망의 발달로 마케팅의 방법도 다양하게 변화되고 있다. 기존의 유명인, 경제적 지원 기반의 성공적인 마케팅방법론과 달리, 최근 인플루언서 기반 유튜브 마케팅이 큰 대세를 이루고 있다. 본 논문 에서는 처음으로 유튜브 양적 정보 및 댓글분석 기반 다각도 질적 분석을 활용하여 54개 이상의 유튜브 채널에서 인플루언서 특징을 추출하고 대표적인 주제들을 모델링하여 개인 맞춤형 영상 만족도 극대화는 물론 기업체가 새로운 아이템을 마케팅 할 때 기존의 인플루언서 특징을 참고하여 새로운 아이템의 영상을 제작하고 배포함으로써 성공적인 홍보 효과를 누릴 수 있도록 보조 수단 제공을 목적으로 한다. 유튜브 채널 별 다양한 영상의 모든 댓글을 각 문서로 가정하고 TF-IDF 및 LDA알고리즘을 적용하여 성능 극대화 향상을 보였다.