• 한국항공우주학회지
• /
• 제33권3호
• /
• pp.10-17
• /
• 2005

축대칭 외부압축식 초음속 흡입구의 버즈 억제방법을 조사하기위해 마하 2.0 유동에서 실험적 연구를 수행하였다. 흡입구 모델은 고정형이고 내부 수축부는 없으며, 형상변화는 엔진덮개의 교체에 의해 이루어진다. 실험결과 버즈의 원인은 충격파 교차점에서 발생하는 와류면을 경계로 형성되는 불연속 유동장과 관련이 있는 것으로 나타났다. 외부압축식 흡입구에서는 경사충격파를 카울 앞이나 뒤에 위치하게 함으로써 buzz를 억제할 수 있다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2010년 춘계학술대회논문집
• /
• pp.534-541
• /
• 2010

A high-order accurate Euler flow solver based on a discontinuous Galerkin method has been developed for the numerical simulation of unsteady flows on unstructured meshes. A multi-level solution-adaptive mesh refinement/coarsening technique was adopted to enhance the resolution of numerical solutions efficiently by increasing mesh density in the high-gradient region. An acoustic wave scattering problem was investigated to assess the accuracy of the present discontinuous Galerkin solver, and a supersonic flow in a wind tunnel with a forward facing step was simulated by using the adaptive mesh refinement technique. It was shown that the present discontinuous Galerkin flow solver can capture unsteady flows including the propagation and scattering of the acoustic waves as well as the strong shock waves.

• 한국전산유체공학회지
• /
• 제7권4호
• /
• pp.35-41
• /
• 2002

The projectile afterbodies for zero-lift drag reduction has been analyzed using the Navier-Stokes equations with the κ-εturbidence model. The numerical method of a second order upwind scheme has been used on an unstructured adaptive grid system. Base drag reduction methods that have been found effective on axisymmetric bodies are boattailing, base bleed, base combustion, locked vortex afterbodies and multistep afterbodies. In this paper, turbulence flow and pressure charateristics have been studied for geometries of multistep afterbodies. The important geometrical and flow parameters relevant to the design of such afterbodies have been identified by step number, length and height. The flow over multistep aftoerbodies or base have many kinds of compressible flow characteristics including expansion waves at the trailing edge, recompression waves, separation and recirculating flow in the base region, shear flow and wake flow. The numerical results have been compared and analyzed with the experimental data. The flow characteristics have been clearly shown.

• 한국추진공학회지
• /
• 제7권3호
• /
• pp.45-52
• /
• 2003

원추형 초음속 노즐 확산부에 이차유동이 음속으로 분출될 때 나타나는 노즐 내부 유동장에 대한 수치적 연구가 이루어졌다. 대수-난류모델과 $\kappa$-$\varepsilon$ 모델을 사용한 레이놀즈-평균 Navier-Stokes 방정식을 계산함으로서 노즐 내부에서 나타나는 충격파와 경계층의 간섭에 의한 3 차원 유동장을 해석하였다. 얻어진 수치해석의 결과는 동일한 조건에서 수행된 실험결과와 잘 일치하고 있음이 판명되었다. 이차유동의 분출압력 변화가 충격파와 경계층의 간섭과 함께 노즐내부 유동장 구조에 미치는 영향을 평가하였다. 아울러 충격파 간섭 후방에서 나타나는 와류유동 구조와 벽면 압력분포에 관한 정보를 얻었다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2007년도 추계 학술대회논문집
• /
• pp.171-176
• /
• 2007

Supersonic viscous flow over a 5 degree half angle cone studied computationally with three-dimensional Navier-Stokes equations. Steady asymmetric solutions of 5-deg half angle cone show that the asymmetric flow separation is caused by convective instability. The angle of attack, Reynolds number, and Mach number affected the side force variation that is caused by asymmetric vortical flow.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.117-124
• /
• 2004

The mixing enhancement is one of the most important problems for the development of scramjet engines. The influence of the streamwise vortices produced by a ramp in a unheated supersonic flow on the mixing of twin jets injected from its base was experimentally investigated. Nominal Mach number of the main airstream and of the twin jets at the nozzle exits were 2.35 and 2.0, respectively. Three dimensional velocity distributions near the ramp with and without injection were measured by Particle Image Velocimetry (PIV). A pair of counter rotating streamwise vortices could be seen behind the injector without injection. On the other hand, two pairs of streamwise vortices could be seen with injection. The outer one had the same direction as the vortex pair produced by the ramp, but they were stronger than those produced by the ramp. The inner ones had the opposite directions to the outer ones. It is considered that these vortices enhance the mixing near the injector.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2000년도 제21회 KOSCO SYMPOSIUM 논문집
• /
• pp.83-91
• /
• 2000

A numerical study was carried out to investigate the 'unstart' process of thermally-choked combustion in model scramjet engines. The combustion mechanism of supersonic combustor will be compared with the experimental results obtained from the T3 free-piston shock tunnel at ANU (Australian National University) and the high enthalpy supersonic wind tunnel at UT (University of Tokyo). For the numerical simulation of supersonic combustion. multi-species Navier-Stokes equations were considered. and detailed chemistry reaction mechanism of $H_2$-Air were adopted. The governing equations were solved by Roe's FDS method and LU-SGS method with MUSCL scheme. In this study. it is found that the thermal choking process could result from excessive heat release due to combustion. In detail, sufficient heat release could be generated at local region of very high temperature increased by reflection of shock waves or vortex sheets. Accordingly the flow of downstream of the combustor fell to subsonic field propagated upstream along the combustor. Sometimes the subsonic flow field propagated into isolator could generate precombustion shock waves in the isolator.

• 한국항공우주학회지
• /
• 제30권5호
• /
• pp.24-31
• /
• 2002

축 대칭 원형노즐 출구에 삼각형 형태의 작은 탭이나 얇은 테이프가 부착되었을 때 나타나는 초음속 제트유동장의 변화에 관한 연구가 쉴리렌 영상과 피토압력 측정을 통하여 수행되었다. 노즐 출구면적의 1 %에 해당하는 작은 탭에서 나타나는 유동방향 와류에 의한 제트유동 변화는 유동이 과소팽창 될 때 완전팽창과 과대팽창의 경우에 비하여 더 크게 나타나며 이로 인한 유동유입이 더 크게 나타남을 알 수 있었다. 탭의 설치각도 변화에 의한 영향도 평가되었으며, 유동이 과대팽창 될 때 노즐 안으로 구부러진 탭의 설치가 충격파의 간섭강도를 약화시키고 이로 인한 마하디스크의 소멸현상을 관찰할 수 있었다. 아울러 노즐내부 낮은 높이의 돌출부가 후방 유동장의 원주방향으로 압력변화를 나타내고, 이러한 압력변화는 유동의 팽창 정도에 영향을 받음을 알 수 있었다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2003년도 The Fifth Asian Computational Fluid Dynamics Conference
• /
• pp.294-298
• /
• 2003

The complex, unsteady, self-sustained pressure oscillations induced by supersonic flow past a rectangular cavity is investigated using numerical simulations. The present numerical study is performed using a parallel, multiblock solver for the two-dimensional, compressible Navier­Stokes equations. Open cavities with length-to-depth (L / D) ratio in the range 0.5 - 3.3 are considered. This paper sheds light on the cavity physics, cavity oscillatory mechanism, and the organisation of vortical structures inside the cavity. The vortex shedding phenomenon, the shear layer impingement event at the aft wall and the movement of the acoustic/compression wave within the cavity are well predicted. The vortical structures· and the source of the acoustic disturbances are found to be located near the aft wall of the cavity. With the increase in the cavity length, strong recompression of the flow near the aft wall leading to a sudden jump in the cavity form drag is observed. The estimated cavity tones are in good agreement with the available semi­empirical relation. Multiple peaks are noticed in deep and long cavities. For the present free­stream Mach number 1.71, it is observed that around L/D=2.0, the cavity oscillatory mechanism changes from the transverse to longitudinal oscillatory mode. The effects of this transition on various fluid dynamics and acoustic properties are also discussed.

• 한국항공우주학회지
• /
• 제50권11호
• /
• pp.747-754
• /
• 2022

유체진동기에서 분출되는 초음속 진동제트를 이용하여 충격파에 의한 경계층 박리유동을 제어하는 실험적 연구가 이루어졌다. 유체진동기의 위치와 제어압력의 변화가 경사충격파에 의하여 발생되는 경계층 박리유동의 특성에 미치는 영향이 관찰되었고, 이를 위하여 고속 슐리렌, 표면유동가시화, 벽압력 측정, 그리고 정밀 피토관 측정 기법이 적용되었다. 본 연구의 초음속 진동제트의 박리유동 제어 특성은 공기제트 와류를 이용한 기존 제어기법과 정량적으로 비교 분석되었다.