• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 추계학술대회 논문집 학회본부
• /
• pp.373-375
• /
• 1997

In this study, we designed multiple mesh circuit consisting of 3-6 meshes and pulse superposition one consisting of a 3 mesh, and fabricated the electrical power supply and the single elliptical resonator. We developed the two pulse superposition technique forming the step pulse shapes of pulsed Nd:YAG laser with single shot multivibrator and 2 SCRs. Laser beam generated by multiple mesh circuit and superposition one respectively irradiated target surface to analyze process state of surface with spark and vapor. And it was obtained experimental results that all superposition meshes had common points which the best efficiency was obtained at delay time 0[${\mu}s$], followed by, no superposition and obtained at delay time 250[${\mu}s$].

• 동력기계공학회지
• /
• 제1권1호
• /
• pp.144-153
• /
• 1997

The magnetic levitation system is utilized in the magnetic bearing of high-speed rotor because of little friction, no lubrication, no noise and so on. The magnetic levitation system need the feedback controller for the stabilization of system, and gap sensors are generally used to measure the gap. The use of gap sensors brings out the increase of the number of troublesome, and the decrease of the control performance because of the dislocation between the measurement point and the control point. This paper presents the design of the gap estimation circuit for the sensorless method proposed by authors in the magnetic levitation system. We made the gap estimation circuit which was composed of both the superposition circuit and the measuring circuit. And we investigated the validity of the usefulness of the proposed sensorless method in the magnetic levitation system through results of actual experiment.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제53권1호
• /
• pp.1-7
• /
• 2004

This paper presents a sensorless control strategy of a PMSM(Permanent Magnet Sycchoronous Motor). This method is very simple to compute the position angle of a rotor. A principle and a practical solution are described. A sensorless control algorithm is proposed to remove a mechanical position sensor. The theory is based on the superposition principle. The state equation of a motor is divided into two conditions: one is the state equation of exciting voltage and phase current in a constraint, the other is the state equation of back EMF(Electromotive Force) and phase current in a short circuit. Based on the analysis, short circuit current by back EMF is computed and then the information of position angle is calculated. The proposed method is verified by experimental results.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제51권6호
• /
• pp.292-297
• /
• 2002

This paper proposes a sensorless drive of a permanent magnet synchronous motor. In general EMF is used to calculate the current of Permanet Magnet Synchronous Motor(PMSM). However the current has a lag component by a time constant. So it is difficult to directly calculate a position angle. To estimate the position using the current without a lag component in this paper, the controller calculates the motor current by using a superposition principle in the equivalent circuit and then compensates lag component with a time constant of the motor. Therefore the estimated motor current without a lag compoent can be obtained and it is used to calculate the rotor position indirectly. In order to confirm the effectiveness of the proposed algorithm, experimental results are shown in detail.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제51권4호
• /
• pp.174-179
• /
• 2002

In this paper, the modified simulation algorithms of the Auto Transformer (AT) feeding electric train system were proposed. To obtain terminal voltage of train by using equivalent circuit or the AT feeding system, the iterative method is proposed for which determine the train voltages. The train voltages are iteratively calculated from the system voltage drop and line impedance. In the carte study, the proposed method is verified from actual operation data of the Kwa-Chon line. Also it is verified that the proposed method can be extent to the multi-train simulation tool. The terminal voltage of the multi-train can be calculated by using superposition principle and it is easily applied to the proposed method. Therefore, the proposed method can be a solution for the complexity of the circuit analysis in the existing methods.

• 전기학회논문지
• /
• 제60권12호
• /
• pp.2236-2245
• /
• 2011

This paper deals with the levitation force characteristics of electromagnet for MAGLEV vehicle application. The magnetic flux density distribution and levitation force characteristics of the electromagnet are investigated by means of equivalent magnetic circuit model. Firstly, we defined the aligned and unaligned electromagnet module for the full-electromagnet, and magnetic flux paths are represented for each model including leakage and fringing flux paths. Because of the analysis model contains both the permanent magnet and electromagnet coil, we calculated the airgap magnetic flux density and levitation forces using flux superposition in electromagnetic circuit. The results are validated extensively by comparison with finite element analysis. Moreover, the 1/4 scaled magnetic levitation and propulsion test vehicle has been manufactured and tested in order to verify these predictions. The experimental results confirms the validity of the analytical prediction with equivalent magnetic circuit model for the description of a electromagnet.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1884-1885
• /
• 2007

DC 80[V]의 주 전원에서의 방전 가공은 가공 시 서보계의 헌팅상태가 자주 발생되기 때문에 방전상태가 불안정 하였다. 본 연구에서는 DC 300[V]의 보조 전원을 주 전원과 중첩한 결과, 방전 개시 전압이 높게 됨으로써 서보계의 헌팅상태가 감소하여 방전이 매우 안정하게 되어 가공 능률을 향상하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.408-411
• /
• 2008

In this paper, a new DC ground fault detection system is proposed, which is suitable for photovoltaic power generation systems. The proposed ground fault systems is superposition of divide resistance and detection circuit. The proposed system has the characteristics of a simplified structure, reduced cost and volume compared with those of the conventional ground fault system for DC source. The operation principle of the proposed systems is described and verified by simulation result.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 B
• /
• pp.1226-1228
• /
• 2001

In this paper, the modified simulation algorithms of the Auto Transformer (AT) feeding electric train were proposed. To obtain terminal voltage of train by using equivalent circuit of the AT feeding system, the iterative method is proposed for which determine the train voltages. The train voltages are iteratively calculated from the system voltage drop and line impedance. In the case study, the proposed method is verified from actual operation data of the Kwa-Chon line. Also it is verified that the proposed method can be extent to the multi-train simulation tool. The terminal voltage of the multi-train can be calculated by using superposition principle and it is easily applied to the proposed method. Therefore, the proposed method can be a solution for the complexity of the circuit analysis in the existing methods.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2002년도 종합학술발표회 논문집 Vol.12 No.1
• /
• pp.413-422
• /
• 2002

A novel photonic bandgap(PBG) structure is proposed and measured for wide bandgap and compact circuit applications. The proposed structure realizes the ultra-wideband bandgap(2-octave) characteristics by superposing two different PBG structures into a coupled double-plane configuration. A low pass filter fabricated using 3-period of the PBG cells shows 2-octave 10 ㏈ stopband from 4.3 to 16.2 ㎓ and 0.2 ㏈ insertion loss in the passband. Moreover, we confirmed that 44∼70 % size reduction can be achieved using the proposed PBG structures. We expect this novel double-plane PBG structure is widely used for compact and wideband circuit applications, such as compact high-efficiency power amplifiers using harmonic tuning techniques.