• Textile Coloration and Finishing
• /
• v.21 no.4
• /
• pp.39-45
• /
• 2009

PVA films were crosslinked with dimethylol dihydroxy ethylene urea (DMDHEU) and three polycarboxylic acids of butanetetracarboxylic acid (BTCA), citric acid and malic acid Different factors influencing the crosslinking treatment with BTCA were investigated including BTCA and sodium hypophosphite (SHP) concentration, curing temperature and time. The cured films was extracted with boiling water and gel fraction was calculated based on weight change of the PVA films. The gel fraction of PVA films increased with increasing curing temperature and time. And the resistance to water and thermal stability of the crosslinked PVA films improved with the BTCA crosslinking treatment. While crosslinking with citric acid gave the highest gel fraction among the crosslinkers, crosslinking with malic acid showed the highest absorbancy in 0.9% saline solution, which was attributed to lower crosslink density and high number-average molecular weight between crosslinks. The superabsorbent PVA films could be prepared by adjusting the crosslinking condition of PVA with polycarboxilic acids.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.35 no.12
• /
• pp.157-164
• /
• 2019

Superabsorbent polymers(SAPs) are powdery material that absorb water several tens or hundreds of times its own mass. It has been reported that when SAPs are incorporated into a high strength cementitious material, the autogenous shrinkage of the material is reduced. Cross-linked sodium polyacrylate type SAPs are relatively safe for human body and low in production cost. In order to apply this type of SAPs to the admixture for total(plastic+autogenous+drying) shrinkage reduction of high strength mortar, the shrinkage behavior of mortar when an expansion agent(EA) and SAPs were mixed together was analyzed. As a result, it was found that the shrinkage was reduced when an EA 5% (mass % of cement) and SAPs 0.4% were mixed together than the mortar containing only an EA 10%. The shrinkage was further reduced when EA 10% and SAPs 0.4% were incorporated into mortar.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.26 no.1
• /
• pp.1-14
• /
• 2023

Foreign body (FB) ingestion is a common health problem that affects children more than adults. According to gastroenterologists' guidelines, the management of FB ingestion differs slightly between adult and children. This review aimed to compile adult and children guidelines and establish an understandable association to reveal the requirements and timing of the endoscopic procedure, which is the most effective and least complicated technique for gastrointestinal FBs. Coins, pins, and chicken and fish bones have been the most commonly ingested FBs. However, with their increasing use in recent years, large batteries with lithiumion conversion, stronger magnets composed of rare earth metals, such as neodymium, and superabsorbent objects have become the most morbid and mortal, necessitating new management strategies. Although the approach to gastrointestinal FBs is controversial, with different treatment options available in different disciplines, many studies have demonstrated the efficacy and safety of endoscopic procedures. Many factors influence the timing of endoscopy, including the nature, size, and location of the ingested object and the patient's clinical condition.

• Polymer Science and Technology
• /
• v.10 no.2
• /
• pp.215-223
• /
• 1999

• Journal of The Korean Society of Agricultural Engineers
• /
• v.58 no.3
• /
• pp.47-56
• /
• 2016

Superabsorbent Polymers (SAPs) are hydrophilic synthetic polymers which could absorb water by hundreds of their own weight. They are used for multiple purpose including hygienic goods, soil conditioners, and hospital supplies. It is necessary to investigate the standard of their use including the amendment rate for soil application in agricultural fields. It is also important to understand their effects on the soil water content and engineering characteristics. The objective of this study is to find the water absorbing capacity and reusability of SAPs, and the characteristics of water release and effect of them on soil water content and engineering characteristics. In the result, SAPs per unit weight (1 g) used for this research could absorb about 200 g of water in max. The water absorbing capacity decreased after SAPs were used repeatedly. Released water of SAPs could provide the soils with about 9 % of the soil water content. Soil water content increased with decreasing distance from the SAPs. The distance of release was spreaded out with increasing water absorbed of SAPs. Finally, when a drainage and the capacity of soil water content were considered, it is recommended to amend the SAPs with soil by less than 0.25 %.

• Clean Technology
• /
• v.22 no.4
• /
• pp.258-268
• /
• 2016

In this work, carboxymethylcellulose-based composite superabsorbent hydrogels were prepared by electron beam radiation. The composition of carboxymethylcellulose (CMC) varied from 4 wt%, 5 wt%, and 6 wt% to 7 wt% based on the amount of distilled water in the syntheses of hydrogels. Graphite oxide, reduced graphene oxide, activated carbon, and bentonite were used as additives for the synthesis of composite superabsorbent. The effect of CMC composition and the type of additives on the gel properties of the prepared hydrogels was investigated. In order to verify the functional groups in the prepared materials, Fourier transform infrared spectroscopy was used. In addition, mechanical strength, gel fraction, swelling kinetics, and equilibrium swelling ratios were measured for the prepared hydrogels. Swelling experiments were carried out in distilled water, urea solution, and physiological saline water. Prepared hydrogels were reused for 5 times, and gel fraction and swelling ratio were measured at every 24 hours. Among the prepared hydrogels, $C_{5%}GO$ and $C_{5%}rGO$ exhibited excellent mechanical property and relatively high swelling ratios for urea solution and physiological saline water with promising applicability as slow-release fertilizers.

• International Journal of Concrete Structures and Materials
• /
• v.8 no.3
• /
• pp.229-238
• /
• 2014

Typical high-performance concrete (HPC) mixtures are characterized by low water-cementitious material ratios, high cement contents, and the incorporation of admixtures. In spite of its superior properties in the hardened state, HPC suffers from many practical difficulties such as its sensitivity to early-age cracking (which is associated with self-desiccation and autogenous shrinkage). In this context, conventional curing procedures are not sufficiently effective to address these limitations. In order to overcome this issue, two strategies,which are based on the use of internal reservoirs of water, have been recently developed.One of these strategies is based on the use of lightweight aggregates (LWA), while the other is based on the use of superabsorbent polymers (SAP). This paper studies and compares the efficiency of the LWA and SAP approaches.Moreover, some of the theoretical aspects that should be taken into account to optimize their application for internal curing of HPC are also discussed. Two fine LWA's and one SAP are studied in terms of autogenous deformation and compressive strength. Increasing the amounts of LWAor SAP can lead to a reduction of the autogenous deformation and compressive strength (especially when adding large amounts). By selecting appropriate materials and controlling their amount, size, and porosity, highly efficient internal water curing can be ensured.

• Macromolecular Research
• /
• v.13 no.6
• /
• pp.483-490
• /
• 2005

A novel, polysaccharide-based, superabsorbent hydrogel was synthesized through crosslinking graft copolymerization of methacrylic acid (MAA) onto kappa-carrageenan ($_{k}C$), using ammonium persulfate (APS) as a free radical initiator in the presence of methylenebisacrylamide (MBA) as a crosslinker. A proposed mechanism for $_{k}C$­g-polymethacrylic acid ($_{k}C$-g-PMAA) formation was suggested and the hydrogel structure was confirmed using FTIR spectroscopy. The effect of grafting variables, including MBA, MAA, and APS concentration, was systematically optimized to achieve a hydrogel with the maximum possible swelling capacity. The swelling kinetics in distilled water and various salt solutions were preliminarily investigated. Absorbency in aqueous salt solutions of lithium chloride, sodium chloride, potassium chloride, calcium chloride, and aluminum chloride indicated that the swelling capacity decreased with increased ionic strength of the swelling medium. This behavior can be attributed to the charge screening effect for monovalent cations, as well as ionic crosslinking for multivalent cations. The swelling of super absorbing hydrogels was measured in solutions with pH ranging from 1 to 13. In addition, the pH reversibility and on-off switching behavior, at pH levels of 3.0 and 8.0, give the synthesized hydrogels great potential as an excellent candidate for the controlled delivery of bioactive agents.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.27 no.1
• /
• pp.35-40
• /
• 2021

Calcium hydroxide (CH) reacts with CO2 to produce moisture, and sodium carbonate (SC) reacts with CO2 in the presence of moisture. Using these different characteristics of these two reactants, a CH/SC mixture of CO2 absorber tuned for kimchi ripening to produce CO2 in a flexible package was selected. A ratio of CH:SC (1:2) in highly gas permeable microporous spunbonded film (Tyvek) sachet was found to be appropriate for delayed and consistent CO2 absorption useful for kimchi package. Addition of superabsorbent polymer (SAP) as moisture buffer was helpful for boosting the consistency of CO2 absorption. In a package of 0.5 kg kimchi at 10℃, the sachet consisting of 0.794 g of CH + 2.276 g of SC + 0.4 g of SAP suppressed its volume expansion and maintained a suitable range of CO2 partial pressure (PCO2) steadily inside. These optimal conditions may vary depending on the type and salinity of kimchi, storage and distribution temperature, and the material and area of the absorber sachet. This study showed a potential of mixture CO2 absorber to be tuned for CO2 producing packaged kimchi for the purpose of keeping consistent PCO2 at tolerable volume expansion.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.32 no.3
• /
• pp.107-114
• /
• 2022

Carboxymethyl cellulose/poly(ethylene glycol) (CMC/PEG) hydrogels crosslinked with citric acid (CA) are synthesized to evaluate the effect of CMC molecular weight (Mw), PEG and CA concentration on the optical property, swelling rate (SR), degradation rate (DR), and cytotoxicity and cell proliferation of hydrogels. For crosslinked CMC/PEG hydrogels, the FT-IR peak intensity associated with hydroxyl groups decreases due to PEG intercalation (esterification crosslinking) between CMC chains in a similar manner as the concentration of CA crosslinker increases. Crosslinked CMC (Mw = 90,000)/PEG hydrogels with 10 % CA dissolve regardless of PEG content. However, the SR of the CMC (Mw = 250,000)/PEG hydrogels decrease from 4923 % to 168 % with increasing PEG and CA concentrations from 0 to 20 % and from 0 to 25 %, respectively. As the Mw of CMC increases, the DR of the hydrogel is greatly improved. CMC (Mw = 250,000)/PEG10 hydrogels with 10 % CA exhibit the optimum properties of high absorbing capacity (3,200 %) with moderate DR (54 %), stiffness (1.39 ± 0.19 GPa), and cell viability (94.8 ± 1.3 %). CA-crosslinked CMC/PEG hydrogels are highly suitable for wound dressing or personal care applications due to their non-toxicity, good cell proliferation, SR, and mechanical properties.