• Korean Journal of Metals and Materials
• /
• 제50권7호
• /
• pp.517-522
• /
• 2012

In this study, a super carburizing treatment was applied to improve roller pitting fatigue life. It produced excellent properties of surface hardness and temper softening resistance by forming precipitation of fine and spherodized carbides on a tempered marstensite matrix through the repeated process of carburization and diffusion after high temperature carburizing step 1. The cycle II performed two times carburizing/diffusion cycle (process) after super carburization at $1,000^{\circ}C$ had fine and spherodized carbides to subsurface $200{\mu}m$. In this case, the carbide was $(Fe,Cr)_3C$ and there was not any massive carbides. In the case of Cycle II, the roller pitting fatigue life had a 6.15 million cycles. It was improved 48% compared to normal gas carburizing treatment.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 한국통신학회 2006년도 하계종합학술발표회 논문 초록집
• /
• pp.570-570
• /
• 2006

• Journal of the Korea Convergence Society
• /
• 제9권6호
• /
• pp.45-52
• /
• 2018

In this paper, we propose a linear interpolation method based on patch information generated from a low - resolution image for generating a super resolution image in a single image. Using the regression model of the global space, which is a conventional super resolution generation method, results in poor quality in general because of lack of information to be referred to a specific region. In order to compensate for these results, we propose a method to extract meaningful information by dividing the region into patches in the process of super resolution image generation, analyze the constituents of the image matrix region extended for super resolution image generation, We propose a method of linear interpolation based on optimal patch information that is searched by correlating patch information based on the information gathered before the interpolation process. For the experiment, the original image was compared with the reconstructed image with PSNR and SSIM.

• Journal of the Institute of Electronics and Information Engineers
• /
• 제50권3호
• /
• pp.212-218
• /
• 2013

This paper presents an SVD(Singular Value Decomposition)-Pseudo Spectrum method for SAR (Synthetic Aperture Radar) imaging. The purpose of this work is to improve resolution and target separability of SAR images. This paper proposes SVD-Pseudo Spectrum method whose advantages are noise robustness, reduction of sidelobes and high resolution of spectral estimation. SVD-Pseudo Spectrum method uses Hankel Matrix of signal components and SVD (Singular Value Decomposition) method. In this paper, it is demonstrated that the SVD-Pseudo Spectrum method shows better performance than the matched filtering method and the conventional super-resolution based multiple signal classification (MUSIC) method in SAR image processing. The targets to be separated are modeled, and this modeled data is used to demonstrate the performance of algorithms.

• Journal of the Korean Society for Heat Treatment
• /
• 제25권2호
• /
• pp.74-79
• /
• 2012

This study has been carried out to investigate the precipitation behavior of ${\chi}$ phase and effect of ${\chi}$ phase precipitation on the impact toughness of 25%Cr-7%Ni-4%Mo super duplex stainless steel. It was proved that the ${\chi}$ phase was a intermetallic compound, which represented the higher chromium and molybdenum concentration than the matrix phases, and also showed the higher molybdenum concentration than the ${\sigma}$ phase. The ${\chi}$ phase was precipitated at the interface between ferrite and austenite or inside the ferrite matrix in the early stage of aging. The number of ${\chi}$ phase precipitates increased with increasing aging time, however, after showing the maximum value, the number was decreased due to the gradual transformation of ${\chi}$ phase into ${\sigma}$-phase. Aging ferrite phase was decomposed by the $r^2$ phase and ${\sigma}$-phase. Impact toughness rapidly decreased with time in the initial stage of aging at ${\chi}$ phase start to precipitate. Thus, the impact toughness was greatly influence for the precipitation of ${\chi}$ phase.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 한국항해항만학회 2012년도 춘계학술대회
• /
• pp.59-61
• /
• 2012

TDOA 기법은 위치추정 기법의 하나로 간단한 구조와 높은 정확도를 가지는 장점으로 인해 실내측위, 군사, 의료 분야 등에 자주 사용된다. 본 논문에서는 MPM(Matrix Pencil Method)를 이용한 고분해능 TDOA 추정 기법을 제안한다. 제안된 기법은 기존의 교차상관을 이용한 TDOA 기법에 비교하여 높은 정확도를 가지며 CW(Continuous Wave)와 같은 협대역 신호에 적용이 가능하다. 또한 잘 알려진 고분해능 기법 중 하나인 MUSIC(Multiple Signal Classification)에서 공분산 행렬을 사용하는 것과 달리 수집된 데이터를 바로 행렬로 만들어 사용하므로 복잡성이 낮은 특징이 있다. 제안된 기법의 성능을 검증하기 위해 소프트웨어 시뮬레이션 통해 SNR에 따른 오차와 연산량 측면에서 MUSIC 기법과 비교하였다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• 제16권4호
• /
• pp.439-450
• /
• 2003

Flat plate system has been adopted in many buildings constructed recently because of the advantage of reduced floor heights to meet the economical and architectural demands. Structural engineers commonly use the effective beam width model(EBWM) in practical engineering for the analysis of flat plate structures. However, in many cases, when it is difficult to use the EBWM, it is necessary to use a refined finite element model for an accurate analysis. But it would take significant amount of computational time and memory if the entire building structure was subdivided with finer meshes. An efficient analytical method is proposed in this study to obtain accurate results in significantly reduced computational time. The proposed method employs super elements developed using the matrix condensation technique and fictitious beams are used in the development of super elements to enforce the compatibility at the interfaces of super elements. The stiffness degradation of flat plate system considered in the EBWM was taken into account by reducing the elastic modulus of floor slabs in this study. Static and dynamic analyses of example structures were performed and the efficiency and accuracy of the proposed method were verified by comparing the results with those of the refined finite element model and the EBWM.

• Journal of Broadcast Engineering
• /
• 제28권1호
• /
• pp.90-99
• /
• 2023

In this paper, we propose a super resolution network for raw sensor image which data size is lower comparatively to RGB image. But the actual capabilities of raw image super resolution depends on color correction because its absent of camera post processing that leads to unintended result having different white balance, saturation, etc. Thus, we introduce novel color corrector attention network by adopting the idea of precedent raw super resolution research, and tune to the our faced problem from data specification. The result is not superior to former researches but shows decent output on certain performance matrix. In the same time, we encounter new challenging problem of unexpected shadowing artifact around image objects that cause performance declination despite its good result overall. This problem remains a task to be solved in the future research.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제32권9C호
• /
• pp.820-825
• /
• 2007

Super-orthogonal space-time trellis code (SOTTC) uses the expanded set of the orthogonal space-time block code to obtain coding gain and diversity gain without loss of transmit rate. In SOSTTCs, signal set expansions are performed by rotating the first column of the code matrix. The rotating phases used previously were selected to avoid the signal constellation expansion rather than the performance improvement. In this paper, we make a design criterion to select the proper rotating phase to improve the performance of SOSTTCs for fast Rayleigh fading channels. In addition, we design improved SOSTTCs by using the proper rotating phase. Simulation results are also provided to confirm our SOSTTCs are superior to the previous SOSTTCs in the view of BER performance.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• 제5권3호
• /
• pp.29-39
• /
• 2006

In this paper, we propose an efficient method to detect the signal and evaluate performance of the system in frequency selective fading channel. We combine proposed system with OFDM (Orthogonal Frequency Division Multiplexing) to improve performance of the system. First, we study the SOSTTC-OFDM system using two transmit antenna and one receive antenna, and compare performance of the proposed space-time coded OFDM with that of previous system. We expand this system to the system using four transmit antennas with the proposed decoding method. Simulation results show that the proposed decoding method can detect the signal efficiently, and we identify that the performance of the proposed system is shown with varying doppler frequency in frequency selective fading channel.