• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.20 no.2
• /
• pp.114-118
• /
• 1987

The authors carried out a model experiment to examine the hydrodynamic charactristics of the simple camber and the super-V otter board. The model otter boards are made of 1 mm thick iron plate. The simple camber otter board is made to have $12\%$ camber ratio and $432\;cm^2$ plane projected area, and the super-V otter board to have the same camber ratio as the former in every latitudinal section and almost the same plane projected area. The experiment had been done in a circular flow tank in the speed range of $0.1\~1.2m/sec$. As a result, it is examined that in the simple camber otter board the most effective angle of attack is about $25^{\circ}$, the shearing coefficient 1.47 and the drag coefficient 0.42, while in the super-V otter board they are about $20^{\circ}$, 1.40 and 0.40 respectively, so that the simple camber otter board performs a little better efficiency than the super-V otter board.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.3
• /
• pp.263-267
• /
• 2014

Super junction trench gate power MOSFETs have been receiving attention in terms of the trade-off between breakdown voltage and on-resistance. The vertical structure of super junction trench gate power MOSFETs allows the on-resistance to be reduced compared with conventional Trench Gate Power MOSFETs. The heat release of devices is also decreased with the reduction of on-resistance. In this paper, Lattice Temperature of two devices, Trench Gate Power MOSFET and Super junction trench gate power MOSFET, are compared in several temperature circumstance with the same Breakdown Voltage and Cell-pitch. The devices were designed by 100V Breakdown voltage and measured from 250K Lattice Temperature. We have tried to investigate how much temperature rise in the same condition. According as temperature gap between top of devices and bottom of devices, Super junction trench gate power MOSFET has a tendency to generate lower heat release than Trench Gate Power MOSFET. This means that Super junction trench gate power MOSFET is superior for wide-temperature range operation. When trench etching process is applied for making P-pillar region, trench angle factor is also important component. Depending on trench angle, characteristics of Super junction device are changed. In this paper, we focus temperature characteristic as changing trench angle factor. Consequently, Trench angle factor don't have a great effect on temperature change.

• The Journal of Industrial Distribution & Business
• /
• v.8 no.4
• /
• pp.37-46
• /
• 2017

Purpose - The purpose of this study is to investigate the factors that cause consumers to frequently visit large - Super Store and goods for large - scale retailers using Super Store. Research design, data, and methodology - The purpose of this study is to present the empirical analysis of 53 adult males and females living in the Mokpo area on the relationship between perceived level of satisfaction and loyalty of the large - scale marts. The results were analyzed. The statistical data of the questionnaire were verified by the SPSS. Results - In the empirical analysis of this study, four variables were found to be the main loyalty factors, which were found to affect the satisfaction of Super Store and the decision to return again. Therefore, in this study, the quality of goods, price, diversity, and image were analyzed as loyalty factors, and it was analyzed as factors influencing satisfaction. It was confirmed that loyalty factors were important. In particular, consumers' perception of behaviors such as local specialties and community service that can be distinctly differentiated from other distribution agencies was very low. Conclusions - It is necessary to construct a comprehensive systematic system to analyze the detailed factors influencing the satisfaction and loyalty of users of Mokpo ticket consumers and to systematically manage and evaluate them. In order to raise awareness of consumer loyalty factors, consumer satisfaction and loyalty survey should be regularly conducted. Consumers should look for ways to improve them and develop improvement plans. The various direct and indirect services provided by Super Store to consumers include price, quality, assortment, customer service, accessibility, and feelings for large marts. However, since the services provided by the Super Store are different from those of the consumers, the loyalty factors for the different factors can be different. Therefore, in order to differentiate them from traditional markets or other distribution centers, it It should be used as a weapon of competition. In this study, it is generally recognized that the services provided by Super Store are very simple and inexpensive, so that consumers are not aware of the difference of particular stores.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.7
• /
• pp.1672-1686
• /
• 2013

In this paper, we propose a hybrid super-resolution algorithm robust to cut-change. Existing single-frame based super-resolution algorithms are usually fast, but quantity of information for interpolation is limited. Although the existing multi-frame based super-resolution algorithms generally robust to this problem, the performance of algorithm strongly depends on motions of input video. Furthemore at boundary of cut, applying of the algorithm is limited. In the proposed method, we detect a define boundary of cut using cut-detection algorithm. Then we adaptively apply a single-frame based super-resolution method to detected cut. Additionally, we propose algorithms of normalizing motion vector and analyzing pattern of edge to solve various problems of existing super-resolution algorithms. The experimental results show that the proposed algorithm has better performance than other conventional interpolation methods.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.6
• /
• pp.2631-2638
• /
• 2013

In this study, to understand the technology development trend of super-speed maglev, the patents applied by major countries are analyzed. And based on the analyzed results, the domestic technology development direction are suggested. For patent analysis, the major technologies for super-speed maglev are classified into 14 parts. Then, through the quantitative analysis method such as number, increase rate and share rate, the overview of technology development and focused parts by each country are investigated. Also through the qualitative analysis method such as concentration degree, citation index and market share index, the technology level and market securing ability of each country are anticipated. Considering the analyzed results and technology development trend, the domestic technology development direction such as priority development fields and methods are proposed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.10
• /
• pp.4739-4746
• /
• 2013

In position detection for super speed maglev propulsion control, the influence of position signal delay and transmit cycle on propulsion power degradation is investigated analytically and validated by test bed experiments. As a solution to the problem caused by signal transmit, position signal compensation and estimation method is proposed and applied to the test bed. Through experiments, it is confirmed that by adapting the proposed method, the propulsion power is increased remarkably, which results in acceleration and velocity performance improvement. This method could be effectively applied to position detection system of Korean super speed maglev which is under development.

• The Journal of the Korea Contents Association
• /
• v.12 no.7
• /
• pp.284-294
• /
• 2012

In the study, we estimate efficiencies using CCR model of DEA, Super efficiency(AP) model, and super-SBM model with the data of 32 regional public hospitals in Korea from 205 to 2009. With Wilcoxon-Mann-Whitney statistics, we analyze efficiency differences for environmental factors(regions, type of hospital, type of operations, type of education training, relative importance of madicaids) among regional public hospitals. The results can be summarized as follows. Firstly, technical inefficiencies of regional public hospitals range from 15% to 17% in CCR model, 13% to 15% in AP model, 7% to 12.6% in SuperSBM model. Second, we confirm that environmental factors of hospitals cause different inefficiencies among them. The implication of this study is that policy and institutional change may need to improve the efficiencies along with internal managerial reform.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.2
• /
• pp.9-16
• /
• 2013

The comparisons of performance characteristics between the super-mirror face grinding machine using variable air pressure developed in this laboratory to grind precisely the sliding face of a surface hardened workpiece with thermal spray and the conventional one are investigated by measuring the surface roughness and hardness for a SCM440. To process variously workpiece according to shape, size and materials, the rotating and contacting forces of the developed grinding machine can be changed by air pressure. The surface roughness of processed workpiece can be also attained to state of mirror face by grinding precisely the sliding face with changing the rotating speed of diamond wheel. It is possible to be attached to the various machine tools because the super-mirror face grinding machine using variable air pressure is a small size. The grinding efficiency is elevated because it can be worked by two or more grinding machines attached to concurrently a machine tool for the large workpiece. In this study, results show that the cusp height of the super-mirror face grinding machine for the particle size of 100 and $1500No./mm^2$ is lower than that of the conventional one because the vibration is reduced by rotating very fast the diamond wheel with a pressed air and it can be processed by rotating the diamond wheel with a constantly varied air pressure perpendicular to workpiece surface, and that the workpiece in the super-mirror face grinding machine for the particle size of $3000No./mm^2$ can be processed to state of mirror face that is rarely seen by the cusp height. It is also found that the surface hardness of both the conventional and the super-mirror face grinding machines are increased as the particle size of diamond wheel is reduced, and the surface hardness of the super-mirror face grinding machine is HRC 1.1 ~ 1.8 higher than that of the conventional one.

• Journal of the Korea Computer Graphics Society
• /
• v.25 no.3
• /
• pp.105-113
• /
• 2019

Physically-based fluid simulation takes a lot of time for high resolution. To solve this problem, there are studies that make up the limitation of low resolution fluid simulation by using deep running. Among them, Super-resolution, which converts low-resolution simulation data to high resolution is under way. However, traditional techniques require to the entire space where there are no density data, so there are problems that are inefficient in terms of the full simulation speed and that cannot be computed with the lack of GPU memory as input resolution increases. In this paper, we propose a new method that divides and classifies 2D smoke simulation data into the space using the quad tree, one of the spatial partitioning methods, and performs Super-resolution only required space. This technique accelerates the simulation speed by computing only necessary space. It also processes the divided input data, which can solve GPU memory problems.

• Current Optics and Photonics
• /
• v.6 no.6
• /
• pp.550-564
• /
• 2022

Optical microscopy is a useful tool for study in the biological sciences. With an optical microscope, we can observe the micro world of life such as tissues, cells, and proteins. A fluorescent dye or a fluorescent protein provides an opportunity to mark a specific target in the crowd of biological samples, so that an image of a specific target can be observed by an optical microscope. The optical microscope, however, is constrained in resolution due to diffraction limit. Super-resolution microscopy made a breakthrough with this diffraction limit. Using a super-resolution microscope, many biomolecules are observed beyond the diffraction limit in cells. In the case of volumetric imaging, the super-resolution techniques are only applied to a limited area due to long imaging time, multiple scattering of photons, and sample-induced aberration in deep tissue. In this article, we review recent advances in super-resolution microscopy for volumetric imaging. The super-resolution techniques have been integrated with various modalities, such as a line-scan confocal microscope, a spinning disk confocal microscope, a light sheet microscope, and point spread function engineering. Super-resolution microscopy combined with adaptive optics by compensating for wave distortions is a promising method for deep tissue imaging and biomedical applications.