• Journal of Institute of Control, Robotics and Systems
• /
• v.7 no.11
• /
• pp.918-926
• /
• 2001

In this paper, intelligent control method using neural network as a nonlinear controller is presented. Simulation studies for three link rotary robot are performed. Neural network controller is implemented on DSP board in PC to make real time computing possible. On-line training algorithms for neural network control are proposed. As a test-bed, a large x-y table was build and interface with PC has been implemented. Experiments such as inverted pendulum control and large x-y table position control are performed. The results for different PD controller gains with neural network show excellent position tracking for circular trajectory compared with those for PD controller only. Neural control scheme also works better for controlling inverted pendulum on x-y table.

• Proceedings of the KIEE Conference
• /
• 1990.07a
• /
• pp.514-517
• /
• 1990

In this paper, compliant motion control of a manipualator in manipulator is proposed by using the self-tuning adaptive controller. Compliant motion is needed in order to applicated to complicated and accurate fields such as assembly operation in which several parts are matched. For a control method of compliant motion hybrid control is used so forces and position control are proposed selectively through a closed feedback loop. By contacting with environment, the uncertainties higher. Self-tuning controller which adapts to variable dynamic response is applied to compliant motion control in order to satisfy the desired operation. The applicability of the suggested algorithm was confined by simulation of the contour tracking task of four joint manipulator.

• Proceedings of the KIEE Conference
• /
• 1988.07a
• /
• pp.905-908
• /
• 1988

In recent, Kalman filter technique has been much used as one of technique for tracking of the moving target. But some problem are still remained to be resolved. For example, when Kalman filter technique is applied to nonlinear system, the technique is nonoptimal estimator. Therefore, extended Kalman filter is proposed to reduce modeling error for nonlinear system. In this study, an extended Kalman filter in Cartesian coordinates is described for moving target, when the radar sensor measures range, azimuth and elevation angle in polar coordinates. And an approximate gain computation algorithm is proposed. In this approach, Kalman gains are computed for three uncoupled filter and multiplied by a Jacobian transformation determined from the measured target position and orientation.

• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.1416-1419
• /
• 2002

This paper describes an implementation method for the people counting system which detects and tracks moving people using a fixed single camera. This system counts the number of moving objects (people) entering the security door. Moreover, the detected objects are tracked by the proposed tracking algorithm before entering the door. The proposed system with In-tel Pentium IV operates at an average rate of 10 frames a second on real world scenes where up to 6 persons come into the view of a vertically mounted camera.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.5 no.2
• /
• pp.138-144
• /
• 2010

This paper presents the experimental analysis of a F-Hessian SIFT-Based Railroad Level-Crossing Safety Vision System. Region of surveillance, region of interests, data matching based on extracting feature points has been examined under the laboratory condition by the model rig on a small scale. Real-time system were observed by using SIFT based on F-Hessian feature tracking method and other common algorithm.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2002.11a
• /
• pp.629-632
• /
• 2002

본 논문에서는 획득 영상에서 k-평균 알고리즘에 의한 무게중심을 이용하여 이동 물체를 검출하고 추적하는 방법을 제안하였다. 이동 물체의 검출은 획득 영상에 대하여 차영상 후 에지 검출에 의해 수행된다. 제안한 검출 방법은 빛의 밝기와 각도에 의해 발생된 그림자 등의 변형을 제거하고, 이동 물체만을 검출할 수 있어, 빛에 영향을 받은 영상에 대해서도 이동 물체를 양호하게 검출할 수 있다. 물체 추적은 검출된 이동 물체에 대하여 k-평균 알고리즘으로 세 개의 물체 무게중심을 구하고, 무게중심 부근의 화소 평균값과 무게중심간의 거리를 구한다. 다음 프레임들에 대하여 탐색영역의 화소 평균값에 의해 후보 무게중심을 구하고, 물체 무게중심과 구한 후보 무게중심들의 표준편차와 무게중심간의 거리 차를 이용하여 이동 물체를 추적한다. 그 결과, 이동 물체의 추적 속도를 개선시켰고, 물체 추적 오차율을 줄였다.

• Proceedings of the KIPE Conference
• /
• 2001.10a
• /
• pp.639-643
• /
• 2001

Recently, photovoltaic system has been studied widely as a renewable energy system, because it does not produce environmental pollution and it has infinity energy source from the sun. A study on photovoltaic system has a lot of problems like as reappearance and repetition of some situation in the laboratory experiment for development of MPPT algorithm and islanding detection algorithm, because output characteristics of solar cell are varied by irradiation and surface temperature of solar cell. And this system is consisted a lot of solar cell unit. Therefore, the assistant equipment which emulates the solar cell characteristics which can be controlled arbitrarily by researcher is require to the researchers for reliable experimental data. In this paper, the virtual implement of solar cell (VISC) system is proposed to solve these problems and to achieve reliable experimental result on photovoltaic system. VISC system emulates the solar cell output characteristics, and this system can substitute solar cell in laboratory experiment system. To realize the VISC, mathematical model of solar cell is studied for driving converter and the DC/DC converters are compared in viewpoint of tracking error using computer simulation. And then analysis of parallel and series characteristics was done for combination of VISC model.

• Journal of Power Electronics
• /
• v.3 no.1
• /
• pp.62-67
• /
• 2003

Recently, photovoltaic system has been studied widely as a renewable energy system, because it does not produce environmental pollution and it has infinity energy source from the sun. A study on photovoltaic system has a lot of problems like as reappearance and repetition of some situation in the laboratory experiment for development of MPPT algorithm and islanding detection algorithm. because output characteristics of solar cell are varied by irradiation and surface temperature of solar cell. Therefore, the assistant equipment which emulates the solar cell characteristics which can be controlled arbitrarily by researcher is require to the researchers for reliable experimental data. In this paper, the virtual implement of solar cell (VISC) system is proposed to solve these problems and to achieve reliable experimental result on photovoltaic system. VISC system emulates the solar cell output characteristics, and this system can substitute solar cell in laboratory experiment system. To realize the VISC, mathematical model of solar cell is studied for driving converter and the DC/DC converters are compared in viewpoint of tracking error using computer simulation. Output dynamic characteristic of PV array is varied by irradiation and PWM converter performance is studied using PSIM simulator.

• The KIPS Transactions:PartC
• /
• v.11C no.5
• /
• pp.659-670
• /
• 2004

Handoff is one of the most important features for the user's mobility in a wireless cellular communication system. It is related to resource reservation at nearby cells. Resource reservation to the new connection point should occur prior to handoff to enable the user to receive the data or services at the new location, at the same level of service as at the previous location. For the efficient resource reservation, mobility prediction has been reported as an effective means to decrease the call dropping probability and to shorten the handoff latency in a wireless cellular environment. A recently proposed algorithm, ZMHB, makes use of the history of the user's positions within the current cell to predict the next cell. But, the prediction of the ZMHB algorithm is found to be 80∼85% accurate for regular and random movements. In this paper, we propose a new improved ZMHB mobility prediction algorithm, which is called Detailed-ZMHB that uses detailed-zone-based tracking of mo-bile users to predict user movements. The effectiveness of the proposed algorithm is then demonstrated through a simulation.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.2
• /
• pp.84-93
• /
• 2011

In order to provide the real time and proper information to the pedestrian who is using the transport connection and transfer center through data collecting and processing process, the design of the test-bed (Gimpo airport)'s communication construction and the technology of the pedestrian location tracking has been researched. The design of the communication construction should make sure that it can provide believable data to the user of the transfer center. At the same time, the location tracking should also be considered, so that the require of the communication efficiency and the location tracking efficiency can be met together. In order to make the efficient location tracking technology, the problems related to the commercial technology based real time location identification will be resolved and the new approach method was proposed and be applied and analysed to the test-bed. The wireless access points can be located in the most real-world situation which has added the characteristics of the real building to the electronic map, and through the analysis of theirs location, they can be set as the mainly necessary points for the communication construction design and the location tracking and the method to locate that points has been proposed. How to set, how to apply it to the test-bed and the examination result will be introduced in this paper.