• 제목/요약/키워드: Sulfide mineral

검색결과 130건 처리시간 0.028초

수중 세슘 제거를 위한 층상 황화 금속 물질 자성화 연구 (A Study on Magnetization of Layered Metal Sulfide for the Removal of Cesium Ions from Aqueous Solution)

  • 전철민;박지원;류정호;장정윤;조동완
    • 한국지하수토양환경학회지:지하수토양환경
    • /
    • 제28권4호
    • /
    • pp.1-5
    • /
    • 2023
  • In the fabrication of magnetic adsorbent by incorporating iron species on base materials with layered structure, there can be a potential loss of adsorption capacity from the penetration of dissolved iron species into the structure. This work newly synthesized a magnetic adsorbent by incorporating nano magnetite and glucose into layered metal sulfide via hydrothermal treatment, and tested the removal efficiencies of cesium ions (Cs+) by the adsorbents fabricated under different conditions (final temperature and glucose mass ratio). As a result, the optimal fabrication condition was found to be mass ratio of 1 (layered metal sulfide): 0.1 (nano magnetite): 0.4 (glucose) and final temperature of 160℃. As-prepared adsorbent possessed good adsorption ability of Cs+ (54.8 mg/g) without a significant loss of adsorption capacity from attaching glucose and nano magnetite onto the surface.

천연광물을 이용한 황철석 표면 코팅을 통한 폐광산 산성배수 저감 기술 개발 (Developing for Reduction Technology of AMD through Coating on the Surface of Pyrite Using Minerals)

  • 윤현식;지은도;지민규;이우람;양중석;박영태;권현호;지원현;김기준;전병훈;최재영
    • 한국지반환경공학회 논문집
    • /
    • 제12권2호
    • /
    • pp.15-22
    • /
    • 2011
  • 본 연구에서는 폐광산의 산성광산배수(Acid Mine Drainage, AMD)의 발생을 억제하기 위해 산성광산배수의 주원인인 황철석 표면을 천연광물 및 시멘트를 사용하여 화학적으로 코팅하여 산성광산배수의 문제를 해결하고자 한다. 표면 코팅에 필요한 철이온의 생성을 위해 먼저 산화제 $H_2O_2$, NaClO 를 이용하여 표준황철석, 영동탄광, 신림광산 시료의 표면을 산화시켰다. 그리고 천연광물(인회석(Apatite), 석회석(Limestone), 망간광(Mangnite), 돌로마이트(Dolomite), 벤토나이트(Bentonite), 시멘트(Cement))를 이용하여 발생된 철이온과 천연광물의 이온을 결합시켜 표면 코팅을 진행하였다. 그 결과 시멘트와 시료의 양을 1:1로 이용하고 4일 이상 진행하였을 때 위의 실험조건에서 가장 효과적으로 황철석의 표면을 코팅하여 ${SO_4}^{2-}$의 발생이 억제되었다.

필리핀 만카얀 지역 금.은 광석의 비중선별 특성 (Gravity Separation Characteristic for the Gold.Silver Ores on the Philippine Mankayan District)

  • 김형석;채수천;김정윤;손정수;김상배
    • 한국광물학회지
    • /
    • 제21권4호
    • /
    • pp.383-395
    • /
    • 2008
  • 필리핀 만카얀 지역의 빅토리아 광산에서 입수한 금 은 광석으로부터 금 은 성분의 회수율을 높이기 위해 지질 및 광물학적 특성, 금과 은의 수반상태, 파 분쇄에 따른 단체 분리도, 체 분리에 의한 분립 특성과 요동테이블에 의한 비중 선별 특성을 연구하였다. 필리핀산 금 은 광석은 황철석, 섬아연석, 방연석 등의 황화광물과 석영 및 점토 등의 맥석 광물로 구성되었다. 금 은 성분은 황철석, 섬아연석, 방연석 등의 황화광물에 주로 수반되어 있었다. 황화광물 결정의 크기는 $100{\mu}m$에서 $1{\mu}m$ 이하까지 광범위한 입도분포를 갖기 때문에 금 은이 수반된 황화광물의 단체분리도를 높이기 위해서는 금 은 광석을 최소한 $100{\mu}m$ 이하로 매우 작게 분쇄해야 하는 것으로 나타났다. 금 은 광석을 Jaw crusher $\to$ cone crusher $\to$ rod mill 등으로 단계적으로 파.분쇄하여 입도($d_{90}$)를 $100{\mu}m$ 이하로 조절하면 단체분리도가 92% 정도까지 높아졌다. 금 은 성분이 함유된 황화광물의 결정이 $100{\mu}m$ 이하의 입단에서 고르게 분포되어 있기 때문에 체질에 의한 분립 방법으로는 금 은을 수반한 황화광물을 선택적으로 분리하여 회수할 수 없었다. 파 분쇄한 금 은 광석을 체로 분립한 후 요동테이블로 비중 선별한 결과, 정광에는 황화광물이 주로 농축되어 금과 은의 품위가 각각 40 ppm 및 140 ppm까지 높아졌다. 이때 정광의 금 실수율은 거의 100%에 이르지만, 은 실수율은 50% 수준에 불과하였다.

통가국 라우분지 TA 26 해저산의 열수변질작용 (Hydrothermal Alteration Around the TA 26 Seamounts of the Tofua Volcanic Arc in Lau Basin, Tonga)

  • 조현구;김영호;엄인권;최헌수
    • 한국광물학회지
    • /
    • 제25권4호
    • /
    • pp.233-247
    • /
    • 2012
  • 통가국 라우분지(Lau Basin)의 해저열수광상 개발을 위한 해저열수광상 분포 및 산상에 관한 특성을 규명하기 위하여 X선 회절분석을 통하여 해저열수광상 해저퇴적물 및 열수변질대의 광물조성을 연구하였다. 연구에 사용된 시료는 TA 26 해저산 주변에서 채취된 코어 시료, 기반암 및 해저퇴적물 시료이고, 벌크 시료와 점토 부분을 분리한 정방위 시료를 제작하여 X선 회절분석을 실시하였다. TA 26 해저산에서 채취된 기반암은 대부분 사장석과 석영으로 이루어져 있는 데 반하여, 표층퇴적물은 대부분 카올린광물과 스멕타이트로 구성되어 있다. 열수구 퇴적물은 대부분 석고, 중정석, 섬아연석, 황철석 등 황산염광물과 황화광물로 구성된다. 기반암과 해저퇴적물의 광물조성으로 미루어 보아, TA 26 해저산의 열수광화대는 주변에 스멕타이트 또는 카올린광물을 형성시키는 정도의 이질변질작용을 일으켰음을 알 수 있다. MC08H-06 시추 코어 시료는 상부는 비변질대, 하부는 스멕타이트와 카올린광물로 구성된 이질변질대에 해당한다. 다양한 황화광물과 황산염 광물의 존재, 이질변질작용에 해당하는 열수변질대의 존재는 TA 26 해저산 내에 해저열수광상이 존재하고 있음을 지시하는 것으로 판단된다.

가곡광산 연-아연 광체의 광대역유도분극 반응 특성 (Spectral Induced Polarization Response Charaterization of Pb-Zn Ore Bodies at the Gagok mine)

  • 신승욱;박삼규;신동복
    • 지구물리와물리탐사
    • /
    • 제17권4호
    • /
    • pp.247-252
    • /
    • 2014
  • 가곡광산은 스카른형 광상으로서 섬아연석, 방연석, 황동석, 자류철석 등의 황화광물을 수반한다. 이러한 광물은 전극분극에 의한 IP effect가 크기 때문에 광대역유도분극(spectral induced polarization; SIP)법을 이용하여 효과적으로 탐사할 수 있다. 따라서 이 연구는 황화광물 함량 및 입자의 크기를 지시하는 충전도와 시간상수를 실내 SIP 측정을 통하여 구하고 이로부터 가곡광산 내 두 광체에 대한 광화작용 차이를 비교하는데 목적을 두었다. 이를 위해 남쪽의 월곡광체와 북쪽의 선곡광체를 대상으로 시료를 채취하였다. 시료의 광화작용 특성을 파악하기 위해 휴대용 XRF 측정기를 이용하여 금속의 함량을 측정했고, 실내 암석 SIP 측정시스템을 이용하여 SIP 자료를 획득했다. XRF 측정결과 가곡광산 광체는 철, 아연, 납, 구리 등의 금속을 수반하고 있다. 특히 아연과 철의 함량이 다른 금속과 비교하여 매우 높았고, 이 두 금속은 현미경 관찰을 통하여 섬아연석과 자류철석에 의한 영향으로 판단하였다. SIP 등가회로 분석 결과, 월곡광체가 선곡광체에 비하여 금속의 함량이 더 높았기 때문에 황화광물을 더 많이 수반하는 것으로 판단했고, 이는 SIP에서 충전도의 결과와 잘 부합한다. 반면 선곡광체의 시간상수가 더 컸기 때문에 선곡광체가 월곡광체보다 황화광물 입자 크기가 더 큰 것으로 판단했다.

3차원 X-ray 단층 화상을 이용한 스카른 광석의 정량분석 연구 (Quantitative Analysis of Skarn Ore Using 3D Images of X-ray Computed Tomography)

  • 정미희;조상호;정수복;김영훈;박재구
    • 한국광물학회지
    • /
    • 제23권3호
    • /
    • pp.211-217
    • /
    • 2010
  • 스카른 Zn-Pb-Cu 복합광석을 구성하는 주요 구성 광물의 정량분석을 목적으로, 마이크로 포커스 X-ray 단층촬영 장비를 이용한 스카른 복합광석의 3차원 비파괴검사를 수행하였다. X-ray 단층화상의 화상결함을 감소시키고자 제안된 화상보정법을 이용하여 화상들을 보정한 후에 3차원으로 재구성하였다. 주사전자현미경(SEM)에 의한 표면분석과 보정된 X-ray 단층화상을 비교하여 주요광물에 대한 CT 값의 범위를 결정하였다. 재구성화상 내 전체 광물의 체적비율을 분석한 결과, 황화광물 20.5%, 맥석광물 79.5%로 평가되었다. X-ray 3차원 단층화상 정량분석법은 광석 내 유용광물의 부존형상과 회수율 분석에 유용하게 적용될 것으로 기대된다.

자동차(自動車) 폐촉매(廢觸媒)의 침출액(浸出液)으로부터 백금족(白金族) 금속(金屬)의 용매추출(溶媒抽出) (Solvent Extraction of Platinum Group Metals from the leach Liquor of Spent Automotive Catalyst)

  • 김미애;이재천;김치권;김민석;김병수;유경권
    • 자원리싸이클링
    • /
    • 제15권5호
    • /
    • pp.3-10
    • /
    • 2006
  • 자동차 폐촉매의 침출액으로부터 백금족 금속의 분리를 위하여 용매추출에 대한 기초연구가 수행되었다. 추출제로 tri-n-butyl phosphate (TBP), tri-n-octylamine (TOA) 그리고 di-n-hexyl sulfide (DHS)를 등유에 희석하여 사용하였다. 추출제의 종류 및 농도가 백금, 팔라듐 그리고 로듐의 추출거동에 미치는 영향을 조사하였다. 또한 세륨, 납, 철, 마그네슘 그리고 알루미늄 등 침출액에 존재하는 주요 금속불순물의 추출거동도 함께 조사하였다. TBP는 백금과 팔라듐, 그리고 TOA는 백금, 팔라듐, 로듐을 동시에 추출하였다. DHS 추출제인 SFI-6에 의한 용매추출 시 백금이 팔라듐과 함께 유기상으로 추출되었으나, SFI-6R은 팔라듐만 선택적으로 추출하였다. SFI-6R은 SFI-6에 비하여 팔라듐에 대한 선택성이 우수하였으나 추출속도가 느렸다. 추출제의 종류에 따라 백금족 금속과 함께 추출되는 금속불순물들이 달라지며 세정 또는 탈거공정에서 이들을 제거하여야 한다. 자동차 폐촉매의 침출액으로부터 백금, 팔라듐 그리고 로듐을 분리하기 위하여 먼저 DHS 추출제인 SFI-6R를 사용하여 팔라듐을 분리한 다음 TBP 또는 TOA으로 백금을 추출하여 로듐과 분리하는 공정이 적절한 것으로 나타났다.

해저열수광상 기술.경제성평가 모델 개발 (Development of Technical and Economic Evaluation Model for Seafloor Massive Sulfide Deposits)

  • 박세헌;박성욱;권석재
    • Ocean and Polar Research
    • /
    • 제28권2호
    • /
    • pp.187-199
    • /
    • 2006
  • The Kuroko-type seafloor massive sulfide deposits found in the western Pacific have been considered to have potentials for economic recovery of Au, Ag, Cu, Zn, and Pb. In this study, a preliminary model was developed for the technical and economic evaluation of them. The FRSC site on Lau Basin in the Tonga EEZ was selected as a target. In this study, no construction In for the metallurgical processing subsystem was accounted for. Instead, it was assumed to sell the Cu, Zn, and Pb concentrates to the existing sulfide customer smelter. The low total investment costs for the development make the venture very attractive. However, the result of the economic feasibility evaluation is still less attractive with the mean metal yield of the Kuroko on land. It is considered that commercial mining may be plausible if the richer metal yields are applied to the development. Quantitative information for metal yield is necessary for a more accurate evaluation. However, the important resource potential information regarding the amount of ore body, the inside structure, and the metal yields have not yet been clarified sufficiently. h addition, the flotation of ore body using seawater has not been tested yet. It is necessary to solve these problems through the experimental R&D and a survey.

대구지역에 분포하는 약수의 지구화학적 특성 (Geochemical Characteristics of the Mineral Water in Taegu Area.)

  • 김종근;이재영
    • 한국환경보건학회지
    • /
    • 제23권3호
    • /
    • pp.56-65
    • /
    • 1997
  • Chemical analysis, statistical analysis and geochemical study were carried out to investigate the influence of the geology on the chemical characferistics of the mineral water in Taegu area. A simple comparision between the chemical components of the mineral water and their bedrocks indicates that the bedrock types in the catchmerit area control the chemical characteristics of the surface water. However more objective evidences for the mineral water-bedrock relationship come from the statistical analyses(cluster analysis and factor analysis). The results of the statistical analyses suggest that the bedrock type factor explains the data variation seven times as much as pollution does, which evidently indicates that the bedrock in the study area mainly control the mineral water chemistries. The results of comparision of the statistical analyses results with the mineral weathering reactions and mineral stability diagrams can be summarized as follows: 1. Plagioclase weathering to kaolinite provides SiO$_2$ , Ca$^{2+}$ and Na$^+$, and muscovite weathering to kaolinite provides K$^+$, and amphibole and mica minerals weathering to kaolinite provides F to the mineral water. Most of Ca$^{2+}$ and Mg$^{2+}$ in the mineral water are the products of carbonate mineral dissolution. SO$_4^{2-}$ may be the byproduct of sulfide oxidation. 2. The weatering of silicate mineral produces Ca-rich smectite and kaolinite, but Ca-rich smectite is unstable and will be transformed to more stable kaolinite because of the continuous dilution of the mineral water by precipitation. By Hashimoto's Mineral Balance Index, S-10 and S-12 mineral spring water were evaluated tasty and healthy water, S-9 and S-11 mineral spring water were evaluated tasty water and S-7, S-8 and S-13 mineral spring water were evaluated healthy water.

  • PDF